RunRyder RC
Refresh Screen

Top 10-23-2019 03:10 AM
Bottom 10-16-2019 03:10 AM

192 forum posts for  30636086   or all topics

Subscriptions   View Classifieds   View Off Topics   View New Posts   Topics Low Replies

02-25-2010 02:31 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed ••🚁Helicopter Align - T-REX 600N
hey guys need some pics of gov sensor install 📷
RaptorRob 9 1283 03-02-2010 03:53 PM
bkervaski
30636086

rrKey Veteran

Tacoma, WA





I dont suffer from mental iIlness, I actually enjoy mine!
 

02-23-2010 08:44 PM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
nitro start problem ( page 1 2 )
cheepstr 25 3823 02-24-2010 08:51 AM
JoshNZ
30636086

rrKey Veteran

Tacoma, WA

I dont have anyone here to ask about nitro heli stuff. nobody arround here flys them and why join a club if they treat me like a freak beacuse of what I fly well the last guy I asked at a club made me feel like that
To bad you are so far up north, there is a couple of clubs around here and a bunch of guys that will be more than happy to help you out. But that's good that you have it figured out and able to flight again! If you ever in the Tacoma area let us know. We flight pretty much every nice afternoon and weekends all day.

https://rc.runryder.com/t561374p1/
I dont suffer from mental iIlness, I actually enjoy mine!
 

02-22-2010 02:07 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
nitro start problem ( page 1 2 )
cheepstr 25 3823 02-24-2010 08:51 AM
JoshNZ
30636086

rrKey Veteran

Tacoma, WA

Do an elimination process.
1: make sure the glow pug is good; once you ruled that out as a good plug then go to fuel
2: make sure you getting fuel.then
3: make sure that you carb its in the right position(correct idle)
and just keep going and making sure thing are good before you move to another!
I dont suffer from mental iIlness, I actually enjoy mine!
 

02-21-2010 03:53 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
new chinese year flying pictures,enjoy guys. 📷
poem 8 839 02-21-2010 04:14 AM
poem
30636086

rrKey Veteran

Tacoma, WA

Nice canopy!!where did you buy it?
Its a "See Through" canopy?
I like the canopy on the last pictures, that's a real nice one! Nice helis; and pictures too!
I dont suffer from mental iIlness, I actually enjoy mine!
 

01-19-2010 06:48 PM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
I need a little help please
hrosee 7 453 01-20-2010 01:46 AM
wifeorheli
30636086

rrKey Veteran

Tacoma, WA

I hear some racket coming from it but since it flew good I didn't worry about it. I have since flown it about 6 more time and the racket has stopped but it has developed a problem that I am sure is related but I can't figure it out.
A lil advise, EVERY TIME that something doesn't feel, sound or look good, don't take any chances, don't flight it. For your safety and the other around you also it will save you $ too.

Take your time and go over the heli, you said you went over the manual; that's good, make the habit of going over the heli too! That way you will find when things are not the way they should be and prevent further damages. In your case I will drop the engine and inspect the clutch, bell and bearings, and go from there.
I dont suffer from mental iIlness, I actually enjoy mine!
 

01-18-2010 03:57 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Trex 600N or 600E 📷 ( page 1 2 )
NQNA 20 3212 01-21-2010 11:23 PM
Matthew3
30636086

rrKey Veteran

Tacoma, WA


I dont suffer from mental iIlness, I actually enjoy mine!
 

01-14-2010 03:01 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
need some ideas pls... 📷
flybold 5 759 01-16-2010 01:40 AM
flybold
30636086

rrKey Veteran

Tacoma, WA


I dont suffer from mental iIlness, I actually enjoy mine!
 

01-07-2010 05:18 PM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
dampeners 📷 ( page 1 2 )
mirmanchuck 21 1521 01-11-2010 03:38 AM
BEEP BEEP
30636086

rrKey Veteran

Tacoma, WA

LMAO
Damper,Dampener,Slamper,Wamper Who cares!!!lololol
The very first time I went to my LHS to buy some, I couldn't remember what they were call, so I told them that "I needed the rubber "watchimakalit" rubber thingies for the head assembly!" They knew exactly what I was talking about!

So I think that it be safe to call them that when you go to your LHS.
I dont suffer from mental iIlness, I actually enjoy mine!
 

01-07-2010 02:07 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
dampeners 📷 ( page 1 2 )
mirmanchuck 21 1521 01-11-2010 03:38 AM
BEEP BEEP
30636086

rrKey Veteran

Tacoma, WA

I dont suffer from mental iIlness, I actually enjoy mine!
 

01-07-2010 01:36 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
dampeners 📷 ( page 1 2 )
mirmanchuck 21 1521 01-11-2010 03:38 AM
BEEP BEEP
30636086

rrKey Veteran

Tacoma, WA

."Its DAMPER, not dampner"

***internet police rant over***


PS: I looking a pack righ now and in the back says "Dampner"; and in the front "dampener" (like in the pic!) So I guess they are cover either way!
I dont suffer from mental iIlness, I actually enjoy mine!
 

01-07-2010 01:26 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
dampeners 📷 ( page 1 2 )
mirmanchuck 21 1521 01-11-2010 03:38 AM
BEEP BEEP
30636086

rrKey Veteran

Tacoma, WA

here is an idea or an opinion if you will; I know that you said that you dont do any hard 3D, but I put the K&B orange dampeners; they are for hard 3D; BUT Since they are harder they will last you longer.

What Im trying to say is that I had the align blk one on mine and lasted about 80 flights the most, a buddy recommended me to give them a try, since I didnt have any in my box he lend me his spare set and I still have them on it! That was long time ago! I have 149 flights on them and still good to go!
My 2 cents!
I dont suffer from mental iIlness, I actually enjoy mine!
 

12-23-2009 05:56 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Align crap again 📷 ( page 1 2 )
helinelly 22 1937 12-24-2009 03:59 PM
sinte
30636086

rrKey Veteran

Tacoma, WA

I have one Align pipe in my 600 aka "the mistress" and she has over 140 flights on it with a TT53, and one "ups" on the pipe side and still rocking!I dont suffer from mental iIlness, I actually enjoy mine!
 

12-23-2009 04:24 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Align crap again 📷 ( page 1 2 )
helinelly 22 1937 12-24-2009 03:59 PM
sinte
30636086

rrKey Veteran

Tacoma, WA

sinte
lame....i've actually had this happen twice this past summer. 1st with a TT Hi-flow pipe, 2nd was the Align pipe

I was there both times! And both times he managed to bring it down without anymore damage!! Thats what I call skills! I wish I can flight half as good!
I dont suffer from mental iIlness, I actually enjoy mine!
 

12-22-2009 05:32 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Tail Blades Cracking/Chipping - Weird 📷
DustinB 9 667 12-22-2009 08:18 AM
dannyh5
30636086

rrKey Veteran

Tacoma, WA

Here is how the mistress looks with a 700 tail fin!

I dont suffer from mental iIlness, I actually enjoy mine!
 

12-15-2009 12:00 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Tail Blades Cracking/Chipping - Weird 📷
DustinB 9 667 12-22-2009 08:18 AM
dannyh5
30636086

rrKey Veteran

Tacoma, WA

or a broken vertical fin flexing over when landing and the blades hit
True!!
I dont use plastics (just the credit cards) but one trick that is gonna help you and the rest of you guys with 600's is get a 700's tail fin and put it on! It bolts right on without any problems,; it gives you more clearance so you wont hit the ground.
I dont suffer from mental iIlness, I actually enjoy mine!
 

12-09-2009 08:23 PM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
500N 📷 ( page 1 2 )
rc.chris 23 2042 12-14-2009 04:29 AM
chopper_crazy
30636086

rrKey Veteran

Tacoma, WA

1400 scorpy on 6s.
I dont suffer from mental iIlness, I actually enjoy mine!
 

12-09-2009 05:56 PM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
500N 📷 ( page 1 2 )
rc.chris 23 2042 12-14-2009 04:29 AM
chopper_crazy
30636086

rrKey Veteran - Tacoma, WA

I’m running a OS .37 on 30% and love it !
Ohhh yeahh!
I dont suffer from mental iIlness, I actually enjoy mine!
 

12-09-2009 05:43 PM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Tail Drive Gear
rogueflyer 7 415 12-09-2009 05:43 PM
30636086
30636086

rrKey Veteran

Tacoma, WA

It could be. But here is a lil trick that will save you some $, get yourself a 700 tail fin. It bolts right in no mods what so ever, and it will give you more clearance so you wont hit the ground with your tail, that way you wont have to be replacing gears.I dont suffer from mental iIlness, I actually enjoy mine!
 

12-09-2009 05:28 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Tail Drive Gear
rogueflyer 7 415 12-09-2009 05:43 PM
30636086
30636086

rrKey Veteran

Tacoma, WA

I have 147 flights on the original ones. No problems. I dont suffer from mental iIlness, I actually enjoy mine!
 

12-03-2009 12:33 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
what blades are you using ( page 1 2 )
bigballajeff 39 1988 12-07-2009 08:43 PM
blade slayer
30636086

rrKey Veteran

Tacoma, WA

I dont suffer from mental iIlness, I actually enjoy mine!
 

12-02-2009 05:24 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
what blades are you using ( page 1 2 )
bigballajeff 39 1988 12-07-2009 08:43 PM
blade slayer
30636086

rrKey Veteran

Tacoma, WA

thanx for the vids...
No problem! I woulda have more videos but due to the temp changes(rain and cold temp) 99% of the guys are not flying + my 2yr old used the camera as a hammer! so the camera is RIP!(resting in pieces) New camera is in the "to get" list! lol
I dont suffer from mental iIlness, I actually enjoy mine!
 

12-02-2009 05:06 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
what blades are you using ( page 1 2 )
bigballajeff 39 1988 12-07-2009 08:43 PM
blade slayer
30636086

rrKey Veteran

Tacoma, WA

Radix 600SB!

I dont suffer from mental iIlness, I actually enjoy mine!
 

11-28-2009 08:00 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Which 600 do I really want?
ChrisK7 12 853 11-30-2009 02:09 AM
sinte
30636086

rrKey Veteran

Tacoma, WA

T-REX 600N Which 600 do I really want?
Its really simple; before this go to a 4-5 pages of people bashing each other; go ahead and buy the one you can afford to crash!!!! This topic has been really beaten to a pulp! And in reality is a matter of personal preference. And a note for the ones that keep bringing the tail taping the ground for X or Y reason. Here is a real simple solution, get 700 tail fin; you get more clearance and there is no way your tail will tap the ground ever again! under normal circumstances! (tail lawn-dart your heli and IT will strip gears! LOL)
I dont suffer from mental iIlness, I actually enjoy mine!
 

11-27-2009 06:21 PM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
trex600 engine
elvis233 9 584 11-28-2009 07:53 AM
Rogerm069
30636086

rrKey Veteran

Tacoma, WA

also whats a good muffler for this motor.. i was going to buy a used align muffler
I also run the align pipe, some have had problems with the bafles coming loose, but I have over 12 gallons on mine with one "ups" and still rocking! Lots of power, but for what I heard the Hatori pipe is the way to go.
I dont suffer from mental iIlness, I actually enjoy mine!
 

11-27-2009 06:50 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
trex600 engine
elvis233 9 584 11-28-2009 07:53 AM
Rogerm069
30636086

rrKey Veteran

Tacoma, WA

Yes,just make sure the carb dosen't stick.It a common problem with that motor..
That was with the earlier versions! My buddy has one and it does sticks, I got one a year after his and no problems!
I dont suffer from mental iIlness, I actually enjoy mine!
 

11-24-2009 04:25 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Lukas Riva flying the new Nova Rossi .57 ( page 1 2 )
Popcorn 37 4532 11-24-2009 09:17 AM
Chickenrun
30636086

rrKey Veteran

Tacoma, WA

Im also interested. Im running a TT53 (love it) but looking around; for the next build (pretty soon) and will like the opinions on the 55 VS 57? and which pipes would do.I dont suffer from mental iIlness, I actually enjoy mine!
 

11-24-2009 02:23 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
My New Rattle Toy thanks to Align!
heli*kitty 11 848 11-25-2009 06:59 PM
Simmer
30636086

rrKey Veteran

Tacoma, WA

My 600 still has the original Align pipe with atleast 6 gallons through it. Still runs good through
I also have one on a TT53 with 12 gallons tru it and one "ups" and still rocking! A Hatori will be the replacement for it when the day comes!
I dont suffer from mental iIlness, I actually enjoy mine!
 

11-08-2009 06:09 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed ••🚁Helicopter Align - T-REX 600N
Help with Tail moving Up& Down
EdDrock 4 511 11-08-2009 06:09 PM
30636086
30636086

rrKey Veteran

Tacoma, WA

Yes its the dampers, bump your head speed up and the problem will go away, the head speed its to slow for them(make sure to lube them too), once they get soft you can bring it down to where you like, if you using the ones that came with the kit they last less than 100 flights, but also depends in your flying style. Or you can go with softer ones too.
I didn't see that align made other dampeners for the 600?

(soft ones)Align Damper Rubber/Grey 70° (600/600CF) - AGNH60066
$3.99 new - A Main Hobbies
Align T-Rex 600 Damper Rubber Black 90 degrees
$3.75 new - R/C Planet
(hard ones)Align Damper Rubber/Black 80° (600/600CF) - AGNH60065
$3.99 new - A Main Hobbies
I dont suffer from mental iIlness, I actually enjoy mine!
 

09-30-2009 07:07 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
show off your T-rex!!!!!!!!!!!!!! 📷 ( page 1 2 3 4 ... Last page )
eckman 143 15481 10-26-2009 04:28 AM
crashagain
30636086

rrKey Veteran

Tacoma, WA

I dont suffer from mental iIlness, I actually enjoy mine!
 

09-25-2009 06:25 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
600 & 700 Carbon Fiber TT Found 📷
red_z06 5 838 09-26-2009 04:33 AM
sinte
30636086

rrKey Veteran

Tacoma, WA

any more info?I dont suffer from mental iIlness, I actually enjoy mine!
 

09-11-2009 12:12 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Using big block engines in the T600 📷 ( page 1 2 )
Metalizer 31 5415 09-17-2009 01:26 AM
LonR
30636086

rrKey Veteran

Tacoma, WA

You can't explain anything to him,its like talking to a Chevy sales men about a ford or talking to a wall

PS All jokes at side Im really interested in this cause "Me Like!", I think it will be a fun project and a A$$ kicking heli! Kinda putting a Super charged big block in a vega! ; Im just taking notes! LOL
I dont suffer from mental iIlness, I actually enjoy mine!
 

09-10-2009 06:51 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Using big block engines in the T600 📷 ( page 1 2 )
Metalizer 31 5415 09-17-2009 01:26 AM
LonR
30636086

rrKey Veteran

Tacoma, WA

suscribed!I dont suffer from mental iIlness, I actually enjoy mine!
 

09-07-2009 10:09 PM  10 years ago
TopicTopic StarterReplyViewLast Post
Closed ••🚁Helicopter Align
50% off CLOSING OUT SALE 600/700 parts
HELISTICKTIME 2 571 09-07-2009 10:09 PM
30636086
30636086

rrKey Veteran

Tacoma, WA

50% off CLOSING OUT SALE 600/700 parts
Not much left?
I dont suffer from mental iIlness, I actually enjoy mine!
 

09-06-2009 02:05 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
Purchasing a new Trex 600 NSP. Need suggestions. 📷 ( page 1 2 3 )
Twrecks600 46 2129 09-07-2009 04:46 AM
Quicktoy
30636086

rrKey Veteran

Tacoma, WA

That bird looks sweet!!
+1
I dont suffer from mental iIlness, I actually enjoy mine!
 

08-23-2009 09:09 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
Align 2 in 1
basmntdweller 16 1061 08-29-2009 04:04 AM
helicopper
30636086

rrKey Veteran

Tacoma, WA

160 flights on mine and no problems, Im happy with itI dont suffer from mental iIlness, I actually enjoy mine!
 

08-13-2009 06:20 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
How fast can a Trex 700 fly? ( page 1 2 3 )
WreckRman2 55 8090 02-12-2011 09:50 AM
Santiago P
30636086

rrKey Veteran

Tacoma, WA

Quote
--------------------------------------------------------------------------------

Yup - We zero'd the altimeter before the flight. It was 2200 AGL.
--------------------------------------------------------------------------------

Holy Cow! That's just a couple hundred feet short of 1/2 mile up in the sky!

----------------------------------------------------------------------
I bet It looked like this with the naked eye!

----------------------------------------------------------------------
And like this with binoculars!

.

I dont suffer from mental iIlness, I actually enjoy mine!
 

08-01-2009 08:50 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
This put a stop on things 📷
LonR 10 1221 08-04-2009 03:07 AM
max232
30636086

rrKey Veteran

Tacoma, WA

Sorry to see that, but good that you find it before it got more expensive, I always keep at least 1 extra in the box just in case the LHS is out! And by the way nice camaro; It sounds great!I dont suffer from mental iIlness, I actually enjoy mine!
 

07-29-2009 04:46 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Hard cranking on OS 50 Hyper-why?
Kustomkid 8 2333 08-13-2009 03:23 PM
Kustomkid
30636086

rrKey Veteran

Tacoma, WA

I have the Trex 600np with a new OS 50 hyper and about 4 gallons thru it. I once had a hydrolock and had to pull the plug to clear it out. I use the yellow type sqeeze pincher on the line.
I have an TT53 with the same line pincher, and it happened to me too, but what I noticed is that, when I pinched right after landing and keep it pinch until I'm ready to start its ok, but if not it will do it. So since I been doing it that way I havent have any problems.

PS and I use an 18v drill
I dont suffer from mental iIlness, I actually enjoy mine!
 

07-27-2009 08:01 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
How fast can a Trex 700 fly? ( page 1 2 3 )
WreckRman2 55 8090 02-12-2011 09:50 AM
Santiago P
30636086

rrKey Veteran

Tacoma, WA

With my new V2 canopy on my Trex700 and my blades waxed, I'm estimating about 230 mph!
I dont suffer from mental iIlness, I actually enjoy mine!
 

07-21-2009 12:11 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
New Align Grey Dampener Question
drken 10 698 07-22-2009 12:43 AM
WJackson
30636086

rrKey Veteran

Tacoma, WA

The gray ones are the soft ones, the blk ones are for 3D; but here is a though!; Even if you are just hovering! The reason the blk are suggested for 3D is because they are stiffer than the gray ones, but that doesnt mean that you cant use them if you are not a 3d pilot! They are stiffer and will last you longer than the gray ones! (because you obey speed limits doesnt mean that you cant own a corvett ! catch my drift?) my .02I dont suffer from mental iIlness, I actually enjoy mine!
 

07-19-2009 09:57 AM  10 years ago
TopicTopic StarterReplyViewLast Post
Closed ••🚁Helicopter Align - T-REX 600N
Tail up&down motion?
EdDrock 11 444 07-19-2009 01:44 PM
EdDrock
30636086

rrKey Veteran

Tacoma, WA

I went tru the same many moons ago and I was going nuts trying to figure it out, until a buddy came over and started laughting and explained to me, and show me how to fix it. Yes is the dampner, It will go away; what hapens is that they are too stiff for your head speed; but after few flies it will go away, you can bump your head spead and it will compensate for it, then bring it down to where you like.
But all it is stiffnes!
I dont suffer from mental iIlness, I actually enjoy mine!
 

07-07-2009 11:48 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
whats a fair price?
redboy 5 536 07-07-2009 11:48 PM
30636086
30636086

rrKey Veteran

Tacoma, WA

MAYBE $750.... better off keeping it, trust me! Market sucks now for selling stuff.
+1
Just found one seller that has them brand spanking new (RTF) with 9252's and 401 with 9256 AND the DX7 for $1700 + free shipping
If you do end up selling, you'll probably make more money if you split up everything.
+1
I dont suffer from mental iIlness, I actually enjoy mine!
 

07-01-2009 09:25 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Spektrum AR7000 instalation 📷
cyberfox78 7 472 07-01-2009 09:25 AM
30636086
30636086

rrKey Veteran

Tacoma, WA

These is how I did it

I dont suffer from mental iIlness, I actually enjoy mine!
 

07-01-2009 09:24 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
TRex 700 given??? 📷
Frogman 16 1688 07-01-2009 01:54 PM
USNAviationjay
30636086

rrKey Veteran

Tacoma, WA

It was TOO nice to be true,

they try to warn you
I dont suffer from mental iIlness, I actually enjoy mine!
 

06-30-2009 05:54 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Changing Pipes on the 600N
chopper_crazy 12 713 06-30-2009 05:28 PM
nofear
30636086

rrKey Veteran

Tacoma, WA

It can go either way. My recomendation would be to set your needles to factory settings and retune.
That's the best and safest route to go!
I dont suffer from mental iIlness, I actually enjoy mine!
 

06-27-2009 07:54 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Question
Prevert 11 596 06-28-2009 06:27 PM
RoTeRHeaD20b
30636086

rrKey Veteran

Tacoma, WA

That happens pretty often with mine. I think its because fuel gets in the carb and floods it out.
What I do to avoid that is I pinch the fuel line after the flight and dont remove the clip until is ready to go up again and no problems.
I dont suffer from mental iIlness, I actually enjoy mine!
 

06-09-2009 05:23 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
Finally! 📷 ( page 1 2 )
QuantumPSI 22 1571 06-09-2009 06:35 AM
QuantumPSI
30636086

rrKey Veteran

Tacoma, WA

Nice! Congratulations and enjoy it QuantumPSI.I dont suffer from mental iIlness, I actually enjoy mine!
 

06-04-2009 06:46 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
What's Wrong with this Picture??? - FIXED!! 📷 ( page 1 2 )
Rockohaulic 32 2683 06-04-2009 06:46 AM
30636086
30636086

rrKey Veteran

Tacoma, WA

But does it make my heli's a$$ look big?
I dont suffer from mental iIlness, I actually enjoy mine!
 

06-04-2009 06:22 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
What's Wrong with this Picture??? - FIXED!! 📷 ( page 1 2 )
Rockohaulic 32 2683 06-04-2009 06:46 AM
30636086
30636086

rrKey Veteran

Tacoma, WA

T-REX 600N What's Wrong with this Picture??? - FIXED!!
Rockohaulic all I can say is WW! Thats great idea and a a$$ kicking job! I tip my hat to you sir!
I dont suffer from mental iIlness, I actually enjoy mine!
 

06-02-2009 08:10 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
How about TREX600N count? 📷 ( page 1 2 3 4 ... Last page )
Caseyho04 366 31036 08-29-2009 04:13 AM
joe84
30636086

rrKey Veteran

Tacoma, WA

they are like flies
Nice methanol-nitromethane burning flies! ( and some lipo powered ones too)
I dont suffer from mental iIlness, I actually enjoy mine!
 

06-02-2009 07:54 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
How about TREX600N count? 📷 ( page 1 2 3 4 ... Last page )
Caseyho04 366 31036 08-29-2009 04:13 AM
joe84
30636086

rrKey Veteran

Tacoma, WA

That's it? I seriously doubt itI dont suffer from mental iIlness, I actually enjoy mine!
 

05-01-2009 06:42 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
G-Force V2 Bearing Blocks Kit for the 600N 📷 ( page 1 2 )
eo19 25 2026 05-01-2009 11:50 PM
xxcysxx
30636086

rrKey Veteran

Tacoma, WA

I have the V2 (G-Force) with the A arm and just measured the clearance @ the closest point between the A arm and the top block and it has about 1.6mm; and 9.6mm from the bottom block @ the closest point. Hope that help with the mods.I dont suffer from mental iIlness, I actually enjoy mine!
 

05-01-2009 08:06 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
G-Force V2 Bearing Blocks Kit for the 600N 📷 ( page 1 2 )
eo19 25 2026 05-01-2009 11:50 PM
xxcysxx
30636086

rrKey Veteran

Tacoma, WA

A main have them back in stock (V2 on sale)I dont suffer from mental iIlness, I actually enjoy mine!
 

04-28-2009 05:05 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Forward Gyro Tray and Inteference 📷
Briliu 15 1226 04-28-2009 05:39 AM
dkshema
30636086

rrKey Veteran

Tacoma, WA

With 2.4 Ghz you dont need the plate anyway
OK here I why I use it, and it save you some $ if you have the servo in the back.

Every time you have to get back there you have to tear it up and put new servo tape and after while it adds up a lil @ the time. Well I have the gyro mounted on a plate using the gyro tape and the plate is mounted to the heli with 3M double sided red tape! $4 a Roll!

So you will tear the 3M tape from between the heli and the plate and the gyro still attached to the plate with the gyro tape!
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-24-2009 07:02 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Lukas Riva flying the new Nova Rossi .57 ( page 1 2 )
Popcorn 37 4532 11-24-2009 09:17 AM
Chickenrun
30636086

rrKey Veteran

Tacoma, WA

That's a $405 combo for a 50 motor!
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-23-2009 09:25 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Lukas Riva flying the new Nova Rossi .57 ( page 1 2 )
Popcorn 37 4532 11-24-2009 09:17 AM
Chickenrun
30636086

rrKey Veteran

Tacoma, WA

a quick check of their site, and no heli motors yet.
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-23-2009 02:02 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
had enough of torque drives ( page 1 2 )
helinelly 27 1408 04-27-2009 04:32 AM
Duckster
30636086

rrKey Veteran

Tacoma, WA

Don't take this the wrong way but learn to land more smoothly. The gears hold up great until you hit the dirt with them. That's no fault of the gears.
Yup! I was thinking the same! And if the gears wont strip something else will break!
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-23-2009 01:59 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Lukas Riva flying the new Nova Rossi .57 ( page 1 2 )
Popcorn 37 4532 11-24-2009 09:17 AM
Chickenrun
30636086

rrKey Veteran

Tacoma, WA

I will like to try it out! It seems to have some "grunt"!I dont suffer from mental iIlness, I actually enjoy mine!
 

04-22-2009 07:47 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Forward Gyro Tray and Inteference 📷
Briliu 15 1226 04-28-2009 05:39 AM
dkshema
30636086

rrKey Veteran

Tacoma, WA

I had the same happened to me! I have 2 friends with the same set up and when I put the gyro on front I had the same result that you! My tail servo started twitching like crazy! So I had to move it to the back, an no more problems; But they have no issues what so ever! I dont suffer from mental iIlness, I actually enjoy mine!
 

04-22-2009 05:23 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Lukas Riva flying the new Nova Rossi .57 ( page 1 2 )
Popcorn 37 4532 11-24-2009 09:17 AM
Chickenrun
30636086

rrKey Veteran

Tacoma, WA

I dont suffer from mental iIlness, I actually enjoy mine!
 

04-22-2009 05:18 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
G-Force V2 Bearing Blocks Kit for the 600N 📷 ( page 1 2 )
eo19 25 2026 05-01-2009 11:50 PM
xxcysxx
30636086

rrKey Veteran

Tacoma, WA

No problem! I dont suffer from mental iIlness, I actually enjoy mine!
 

04-22-2009 06:53 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
G-Force V2 Bearing Blocks Kit for the 600N 📷 ( page 1 2 )
eo19 25 2026 05-01-2009 11:50 PM
xxcysxx
30636086

rrKey Veteran

Tacoma, WA

Who is stocking the V2 GForce blocks?
I got mine from amainhobbies; part #GFT6188; but it seems that they dont stock it, they are canadian made so I did some search and I got these;
http://www.runryder.net/t484301p1/
http://www.helihobby.com/html/trex_nitro_gas.html
http://www.bigboyswithcooltoys.ca/i...facturers_id=38
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-21-2009 06:04 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Grass cutting before and after. 📷
alawel 11 1001 04-22-2009 04:03 AM
Sam2b
30636086

rrKey Veteran

Tacoma, WA

It looks like pics from a Sim
+1
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-17-2009 09:04 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
New Canopy Design (Airbrush + New Tech) $65.99 :) 📷 ( page 1 2 )
CanoMod 25 4492 05-06-2009 03:32 AM
Schuster_Helis
30636086

rrKey Veteran

Tacoma, WA

That looks like a vinyl wrap
Yup!
I like the design in the back!
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-16-2009 07:20 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
New to the Rex 600, is this worth buying? 📷
liquidlogic 16 945 04-19-2009 04:46 AM
xxcysxx
30636086

rrKey Veteran

Tacoma, WA

i'm not sure if i have the v1 or v2 block. how do i tell?
G-force bearing block


V-2
these are the two versions, you get the bearings that the stock block has; but with these you will also get trust bearings, that the stock doesnt have, so your bearing will last longer
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-16-2009 04:17 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
New to the Rex 600, is this worth buying? 📷
liquidlogic 16 945 04-19-2009 04:46 AM
xxcysxx
30636086

rrKey Veteran

Tacoma, WA

i have a question for anyone using that elevator arm with the g-force bearing blocks with thrust bearings. do you have any binding problems, if so do you have to make any modification to make it work?
Nope! Its all good! I have the elevator arm and the V2 g-force blocks. The arm eliminates any play and locks the swash plate solid, same design in the 700.
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-14-2009 07:11 PM  10 years ago
TopicTopic StarterReplyViewLast Post
Closed ••🚁Helicopter Align - T-REX 600N
Looking to buy a Trex600
Biblejosh 9 520 04-15-2009 11:29 PM
itsjojo
30636086

rrKey Veteran

Tacoma, WA

There a few ways to go, and there is also combo packages, those include the engine, blades and so on; there is also packages the you pick what you would like (from what they offer) and sell it to you as a package deal. But I prefer to just buy the kit and put the components that you prefer! Thats is you are looking for a new one.

Another way you can buy a used one from someone at your local flying field, that way you can see for yourself that everything is the way that it supoust to be and inspect it before you make your decision.
Buying used ones is a 50-50 gamble unless you know the person and the care and maintenance that was given to it. And with the current economy is LOTS of people selling their stuff.

Thats my .02
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-14-2009 04:18 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
fan removal....cant get the damn thing off 📷
Quicktoy 18 1896 04-14-2009 12:33 PM
Quicktoy
30636086

rrKey Veteran

Tacoma, WA

when none of the other work!

PS all jokes a side if taping on it wont work use a lil heat!
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-13-2009 02:44 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
G-Force V2 Bearing Blocks Kit for the 600N 📷 ( page 1 2 )
eo19 25 2026 05-01-2009 11:50 PM
xxcysxx
30636086

rrKey Veteran

Tacoma, WA

Anyone using these? I developed some play in the stock bearing blocks. Any feedback good or bad would be appreciated. Are they worth the extro money over the align metal bearing blocks?
Yup!
PM sent
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-12-2009 04:29 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Metal Mixing Arms
enahs 14 519 04-12-2009 03:18 PM
itsjojo
30636086

rrKey Veteran

Tacoma, WA

I always run everything metal except the upper mixing arms.. it saves your grips in a crash and you dont feel any difference between the plastic and metal anyways..
Very good and wise idea!
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-12-2009 03:27 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
I think I need an advice about a new setup 📷 ( page 1 2 )
UltraSeven 35 2183 05-26-2009 03:34 AM
DWS6
30636086

rrKey Veteran

Tacoma, WA

get a mini-g gyro.
I'm contemplating on the idea, how good is it and how hard is to set? And how is compared to the spartan?
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-08-2009 07:43 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
ar 7000 question 📷
choppermann 6 618 04-08-2009 11:41 AM
LONEWOLF2440
30636086

rrKey Veteran

Tacoma, WA

a short piece of heatshrink tubing is good. they used to come that way.
That's what I did and so far no problems what so ever!
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-02-2009 10:25 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
600 LOVE !!!!! 📷 ( page 1 2 3 4 ... Last page )
bulldogs 145 15480 04-02-2009 10:25 PM
30636086
30636086

rrKey Veteran

Tacoma, WA

who wouldn't love
http://www.liveleak.com/view?i=df1_1238588279
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-01-2009 06:33 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
Align 2in1 regulator - FIRE ON THE HELI !!! 📷 ( page 1 2 3 )
Epkencijus 40 5547 04-07-2009 06:50 PM
USNAviationjay
30636086

rrKey Veteran

Tacoma, WA

Not the best but flys good and very good value for money.
There is the answer!!
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-01-2009 08:26 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
Align 2in1 regulator - FIRE ON THE HELI !!! 📷 ( page 1 2 3 )
Epkencijus 40 5547 04-07-2009 06:50 PM
USNAviationjay
30636086

rrKey Veteran

Tacoma, WA

I am running 2 of the 2in1's and haven't had any problems yet.
I have a couple of gallons on mine with out any problems, but the reason I got mine is cause my bud has a lil over 300 flys and no problems what so ever and "he fly like he stole it"
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-01-2009 07:37 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
K&B orange dampers lifespan 📷
jackheli 15 1024 04-01-2009 07:37 AM
30636086
30636086

rrKey Veteran

Tacoma, WA

LOL..Thats a very large girl maybe 400+ lbs???
I dont suffer from mental iIlness, I actually enjoy mine!
 

04-01-2009 06:56 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
New blades on the market.. Who's gonna be the guinea pig? 📷
george0079 5 571 04-01-2009 12:40 PM
audio131
30636086

rrKey Veteran

Tacoma, WA

Submited By: John on 03/18/2009
Preliminary inspection report: These seem like decent blades. Construction overall seems fair to decent. I don't see any major flaws or concerns other than one blade has some chips in the paint where the brass insert in the blade root is, and the spacer itself is about 1mm raised on one side, leading to a 1mm detent in the other side of the root. I may try to get it down, but it should compress when they are installed as well. Going to ask Larry or one of the other guys about this paint chipping is this anything to worry about? I just did a quick check of them as I didn't have time to do anythign else. Overall, I was pleasently surprised as I've boughten cheap blades before and gotten hunks of garbage I wouldn't install for fear of them falling apart on spoolup. Not really sure why I bought these other than curiosity, as I have several sets of Radix 710SB and 710mm Mavrikk G5Pro wide cords, and one set of MAH G2's. Will update when I fly these and see how they are. and update review. So far better than expected, but the proof is in the pudding, and if they fly bad I'll let u know.
I dont suffer from mental iIlness, I actually enjoy mine!
 

03-31-2009 03:21 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
600 LOVE !!!!! 📷 ( page 1 2 3 4 ... Last page )
bulldogs 145 15480 04-02-2009 10:25 PM
30636086
30636086

rrKey Veteran

Tacoma, WA

I dont suffer from mental iIlness, I actually enjoy mine!
 

03-29-2009 02:27 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
G-Force Bearing Blocks Kit V2 (600N) 📷
30636086 10 794 03-29-2009 02:27 AM
30636086
30636086

rrKey Veteran

Tacoma, WA

PM sentI dont suffer from mental iIlness, I actually enjoy mine!
 

03-28-2009 09:27 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
G-Force Bearing Blocks Kit V2 (600N) 📷
30636086 10 794 03-29-2009 02:27 AM
30636086
30636086

rrKey Veteran

Tacoma, WA

Mr Mailman came thru!!
I dont suffer from mental iIlness, I actually enjoy mine!
 

03-26-2009 04:31 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
question on fuel line
choppermann 12 673 04-01-2009 02:58 AM
roket400
30636086

rrKey Veteran

Tacoma, WA

Ok thanksI dont suffer from mental iIlness, I actually enjoy mine!
 

03-26-2009 04:20 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
question on fuel line
choppermann 12 673 04-01-2009 02:58 AM
roket400
30636086

rrKey Veteran

Tacoma, WA

I change my fuel tubing normally only at the end of the season unless I change colors on my canopy and I need different fuel tubing to match
Thats what I was told.(its my first nitro season and loving it)
You have to remember that the hot exhaust gases are build up in that tank and nitro eats the tubing.
True and good point. Here is my question about that; would it help to maintain fuel on it? Like with the fuel magnet?(If you maintain fuel on it helps to prolong the life span of it?
I dont suffer from mental iIlness, I actually enjoy mine!
 

03-25-2009 01:36 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
G-Force Bearing Blocks Kit V2 (600N) 📷
30636086 10 794 03-29-2009 02:27 AM
30636086
30636086

rrKey Veteran

Tacoma, WA

Now waiting on Mr Mailman!I dont suffer from mental iIlness, I actually enjoy mine!
 

03-24-2009 07:20 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
G-Force Bearing Blocks Kit V2 (600N) 📷
30636086 10 794 03-29-2009 02:27 AM
30636086
30636086

rrKey Veteran

Tacoma, WA

ok thanksI dont suffer from mental iIlness, I actually enjoy mine!
 

03-24-2009 05:18 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
G-Force Bearing Blocks Kit V2 (600N) 📷
30636086 10 794 03-29-2009 02:27 AM
30636086
30636086

rrKey Veteran

Tacoma, WA

I think the biggest thing they do it make the main shaft bearings last A LOT longer
that's a good thing then! And what about the fit? Are they any issues with it; or they fit without any problems?
I dont suffer from mental iIlness, I actually enjoy mine!
 

03-24-2009 04:17 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
G-Force Bearing Blocks Kit V2 (600N) 📷
30636086 10 794 03-29-2009 02:27 AM
30636086
30636086

rrKey Veteran

Tacoma, WA

These is what I'm talking about
I dont suffer from mental iIlness, I actually enjoy mine!
 

03-24-2009 04:13 PM  10 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
G-Force Bearing Blocks Kit V2 (600N) 📷
30636086 10 794 03-29-2009 02:27 AM
30636086
30636086

rrKey Veteran

Tacoma, WA

G-Force Bearing Blocks Kit V2 (600N)
If you using or have used these vs stock your input will be appreciated. Thanks
I dont suffer from mental iIlness, I actually enjoy mine!
 

03-23-2009 10:20 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
Vehicle Wrap Graphics 📷 ( page 1 2 )
Larry Legg 27 1544 04-02-2009 11:11 PM
roket400
30636086

rrKey Veteran

Tacoma, WA

sign me up then!
I dont suffer from mental iIlness, I actually enjoy mine!
 

03-23-2009 10:14 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Align 600 muffler rattle ( page 1 2 )
D-fly 29 1525 07-09-2009 01:22 AM
theflyingman2
30636086

rrKey Veteran

Tacoma, WA

will that be the design that has the fitting on the top or the one that has the fitting on the inner side?(hiding; kinda the fuel tubing)I dont suffer from mental iIlness, I actually enjoy mine!
 

03-20-2009 11:03 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
Vehicle Wrap Graphics 📷 ( page 1 2 )
Larry Legg 27 1544 04-02-2009 11:11 PM
roket400
30636086

rrKey Veteran

Tacoma, WA

I am in the process of testing the durability of the product (It has a protective lamination on it)
I volunteer to help you test it!
I dont suffer from mental iIlness, I actually enjoy mine!
 

03-20-2009 11:01 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
Vehicle Wrap Graphics 📷 ( page 1 2 )
Larry Legg 27 1544 04-02-2009 11:11 PM
roket400
30636086

rrKey Veteran

Tacoma, WA

WOOOOOW
me like me like me like!!!!!! It looks like extra income for you!!
sign me up!
I dont suffer from mental iIlness, I actually enjoy mine!
 

03-20-2009 10:52 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
kasama head t-rex 600 📷
luca bianchessi 14 1120 03-29-2009 01:49 PM
luca bianchessi
30636086

rrKey Veteran

Tacoma, WA

like the stock swash plate, mixing arms, radius arms and metal washout base? or what comes with it? I like it but haven't done any research on it(yet)I dont suffer from mental iIlness, I actually enjoy mine!
 

03-20-2009 10:46 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
kasama head t-rex 600 📷
luca bianchessi 14 1120 03-29-2009 01:49 PM
luca bianchessi
30636086

rrKey Veteran

Tacoma, WA

can it be use with the stock components?(If you only want the head assembly)I dont suffer from mental iIlness, I actually enjoy mine!
 

03-20-2009 09:47 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Mini-G gyro mounted up front
MattHarper 15 1657 03-20-2009 09:47 PM
30636086
30636086

rrKey Veteran

Tacoma, WA

electronics are kinda weird and it seems to have a mind of their own sometimes; my example is that I have the exact same set up and heli than another guy that fly with me and I had to move the gyro away from the servos(to the back), because it was making the tail servo twitch like a chiwawa on crack. And he has o issues what so ever!

About the metal plate, I use gyro tape from the gyro to the metal plate and 3M red (industrial grade) from the metal plate to the heli. The 3m tape is like $4 for the roll and gyro tape is around $5 for 3 pieces.
So when something goes wrong or you gonna work on the heli, just remove the 3M tape and leave the gyro tape intact!
I dont suffer from mental iIlness, I actually enjoy mine!
 

03-18-2009 05:59 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Crazy Question
skyraider42 14 664 03-18-2009 05:59 PM
30636086
30636086

rrKey Veteran

Tacoma, WA

I was told once that the "3 things a guy will never get enough are Money, Horsepower and Sex!" I dont suffer from mental iIlness, I actually enjoy mine!
 

03-18-2009 08:22 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Crazy Question
skyraider42 14 664 03-18-2009 05:59 PM
30636086
30636086

rrKey Veteran

Tacoma, WA

here is something interesting for the idea
it seem that enough people have done it (try it) that they came out with these!
http://www.infinity-hobby.com/main/...roducts_id=2906
I dont suffer from mental iIlness, I actually enjoy mine!
 

03-18-2009 08:19 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Crazy Question
skyraider42 14 664 03-18-2009 05:59 PM
30636086
30636086

rrKey Veteran

Tacoma, WA

there is a thread here (RR) about a T-rex 600 with a 90 on it, the guy put pics on the steps; and how he did it.I dont suffer from mental iIlness, I actually enjoy mine!
 

03-17-2009 09:38 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Crazy Question
skyraider42 14 664 03-18-2009 05:59 PM
30636086
30636086

rrKey Veteran

Tacoma, WA

un-boggable t600 running 600'620mm blades with 14 degrees of pitch would be insane!
I dont suffer from mental iIlness, I actually enjoy mine!
 

03-16-2009 04:29 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
Where to get the cheapest of cheap blades for the 700 📷 ( page 1 2 )
Jamin_00 20 2098 03-17-2009 05:05 PM
flustercluck
30636086

rrKey Veteran

Tacoma, WA

Home Depot. Go to the wood department and do it like it was done 15 years ago. You make your own.
I dont suffer from mental iIlness, I actually enjoy mine!
 

03-15-2009 06:40 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Where to buy TREX sport Heli 📷
solo 5 604 03-15-2009 06:40 PM
30636086
30636086

rrKey Veteran

Tacoma, WA

Its a good deal.
I dont suffer from mental iIlness, I actually enjoy mine!
 
🏠Home View New

2 pages [ <<    <    ( 1 )     2     NEXT    >> ]

Wednesday, October 23 - 3:10 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online