RunRyder RC
Refresh Screen

Top 10-23-2019 10:28 AM
Bottom 10-16-2019 10:28 AM

213 posts for  latesleeper   or all topics

Subscriptions   View Classifieds   View Off Topics   View New Posts   Topics Low Replies

01-15-2011 02:01 AM  8 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Radio - Spektrum DSM
yet another issue with the DX8(beeps and chirps) **returned from horizon**
eric 15 2500 01-22-2011 04:14 PM
eric
latesleeper

rrApprentice

OH

Interesting... I sent my radio in in December and got it back after new years. Just popped the battery cover off and noticed they changed my PID sticker to HA008CM. It was one of the PIDs that was in the bulletin.
 

01-07-2011 03:55 PM  8 years ago
TopicTopic StarterReplyViewLast Post
Closed ••🚁Helicopter Radio - Spektrum DSM
Spektrum DX8 issues ( page 1 2 )
relax1 30 6188 01-13-2011 12:08 AM
Gehrbox
latesleeper

rrApprentice

OH

I am having the same binding issue with my DX8 and AR7100R. My Trex 700 uses this receiver with the TM1000 telemetry module. It looses bind with the radio (not sure if it's after so many flights or after a period of time that passes.) My DX8 was one of the affected models in the bulletin. It was sent in to Horizon along with all my receivers. My receivers were fine and the DX8 upgraded with a cap and rectifier board.

I haven't tested it since getting my stuff back from Horizon. One thought is that my Trex with the 7100R is on memory 1 in the DX8. I can try moving it to a different memory slot. I'll post a follow up and let you know if it's fixed.
 

11-14-2010 09:46 PM  8 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Blades and Night Flying
Batman emblem night blades... & blades that spell words. 📷 ( page 1 2 3 )
OneHoof 48 7640 08-31-2011 12:19 AM
cica
latesleeper

rrApprentice

OH

 

10-16-2010 07:44 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Radio - Spektrum DSM
DX8: Y harness with RPM sensor 📷
Felt 11 1809 01-07-2011 04:54 AM
swashy
latesleeper

rrApprentice

OH

Is this a correct diagram or do I have the leads reversed on the telemetry module side?

 

10-16-2010 07:18 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Radio - Spektrum DSM
DX8: Y harness with RPM sensor 📷
Felt 11 1809 01-07-2011 04:54 AM
swashy
latesleeper

rrApprentice

OH

Can someone illustrate a specific diagram of the 7100R backplate sensor, TM1000/TM1100 and the splitter? The diagram from the post above does not match the color of the leads from the backplate sensor.
 

10-12-2010 05:04 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Radio - Spektrum DSM
Is there an serious issue with DX8? 📷 ( page 1 2 3 4 ... Last page )
MrMel 116 15513 11-15-2010 08:58 PM
RAK402
latesleeper

rrApprentice

OH

delete
 

10-12-2010 04:29 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Radio - Spektrum DSM
Is there an serious issue with DX8? 📷 ( page 1 2 3 4 ... Last page )
MrMel 116 15513 11-15-2010 08:58 PM
RAK402
latesleeper

rrApprentice

OH

delete
 

10-05-2010 04:35 PM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Can we use one RPM sensor with DX8?
nitrohelipga 7 1392 10-07-2010 12:31 AM
Shawn Behrens
latesleeper

rrApprentice

OH

This is great info. The thought of running two backplate sensors seems sloppy. Thanks for posting this info up.

Any concerns of power being sent from the 7100R receiver sensor connection to the y corded telemetry connection?
 

10-04-2010 06:34 PM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Can we use one RPM sensor with DX8?
nitrohelipga 7 1392 10-07-2010 12:31 AM
Shawn Behrens
latesleeper

rrApprentice

OH

I would like to know if anyone is using just one sensor as well.
 

10-02-2010 11:32 PM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Radio - Spektrum DSM
"DX8 RPM Sensor"
nitrohelipga 7 1585 10-02-2010 11:40 PM
jrb600n
latesleeper

rrApprentice

OH

jrb600n, how is your setup working with your back plate sensor connected to your receiver and telemetry module? Looking to do something like this on my 700.
 

09-23-2010 08:15 PM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Radio - Spektrum DSM
possible dx8 glitch 📷 ( page 1 2 )
eric 39 6342 09-28-2010 02:53 AM
jschenck
latesleeper

rrApprentice

OH

What are the other glitches besides the model memory? Who tested these radios out before they hit production? I would have figured that the pro team pilots would have seen this.

I appreciate that Spekrum stepped up and validated that there's an issue. Very much looking forward to the fix because I just hate having an expensive brick sitting on the bench.
 

09-22-2010 08:51 PM  9 years ago
TopicTopic StarterReplyViewLast Post
•🏬Classified Feedback and Mediate
Classified Feedback Mr. C 📷 ( page 1 2 3 4 ... Last page )
Mr. C 148 7399 01-18-2014 10:55 PM
stuey223
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback

My Feedback for Mr. C
Great communication and fast payer. Would do business with again. I sold my OS50 hyper to Mr. C.
 

09-16-2010 06:20 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Engines & Mufflers
FS: OS 50 Hyper w/ spare bearings. 📷
latesleeper 10 783 09-16-2010 06:20 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

ttt
 

09-10-2010 05:49 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Engines & Mufflers
FS: OS 50 Hyper w/ spare bearings. 📷
latesleeper 10 783 09-16-2010 06:20 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Align pipe sold!
 

09-09-2010 02:28 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Engines & Mufflers
FS: OS 50 Hyper w/ spare bearings. 📷
latesleeper 10 783 09-16-2010 06:20 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Reduced asking price.

OS 50 with spare bearings thrown in. $85 OBO shipped.
Align 50 Muffler - $40 OBO shipped.
 

09-07-2010 08:56 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Engines & Mufflers
FS: OS 50 Hyper w/ spare bearings. 📷
latesleeper 10 783 09-16-2010 06:20 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Bearings go with the motor.
 

09-07-2010 05:07 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Engines & Mufflers
FS: OS 50 Hyper w/ spare bearings. 📷
latesleeper 10 783 09-16-2010 06:20 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

I seperated the combo.

Any offers?
 

09-07-2010 06:24 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Engines & Mufflers
FS: OS 50 Hyper w/ spare bearings. 📷
latesleeper 10 783 09-16-2010 06:20 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Looking at selling this as a combo. The muffler is in great shape. No dents and still shiny. I'd like to give this post another day or two. I'll then break up the motor and muffler.
 

09-07-2010 05:29 AM  9 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Engines & Mufflers
FS: OS 50 Hyper w/ spare bearings. 📷
latesleeper 10 783 09-16-2010 06:20 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

FS: OS 50 Hyper w/ spare bearings.
I'm selling a strong running OS 50 Hyper. Bearings were changed out about one gallon ago. Motor was running well when it was pulled out of my 600N. Throwing in three sets of stainless steel bearings for the motor. Also selling an Align 50 muffler in great shape, no rattling :-)

OS 50 with spare bearings thrown in. SOLD
Align 50 Muffler - SOLD

Paypal and CONUS buyers only please.

 

08-08-2010 09:07 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Miscellaneous
FS: 600 Paddles and Tail Blades 📷
latesleeper 1 299 08-08-2010 09:07 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

ttt
 

08-05-2010 08:10 PM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
Tail Blade Length - Whacha Running? ( page 1 2 )
Rockohaulic 21 3441 11-02-2010 02:31 PM
Richardmid1
latesleeper

rrApprentice

OH

Sorry... meant to say bevel gears, not crown gears.

I've run 92mm blades instead of 95mm blades on my 600 to give a little extra clearance for the tail on autos. I experienced no loss of tail authority... of course the size difference is is only 3mm.

In the case of the 700, not sure if you can run a smaller blade. I know on the Hirobo Evo 90 I've run 95mm blades but that wouldn't be an even comparison.
 

08-05-2010 04:24 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
Tail Blade Length - Whacha Running? ( page 1 2 )
Rockohaulic 21 3441 11-02-2010 02:31 PM
Richardmid1
latesleeper

rrApprentice

OH

Half empty glass or half full. Either would have the same result. Again, just pointing out a theory.
 

08-05-2010 02:29 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
Tail Blade Length - Whacha Running? ( page 1 2 )
Rockohaulic 21 3441 11-02-2010 02:31 PM
Richardmid1
latesleeper

rrApprentice

OH

One theory would be to minimize the chance of blades hitting grass and stripping crown gears.
 

08-03-2010 04:39 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: Thunderpower TP-1010C Charger 📷
latesleeper 6 604 08-03-2010 12:34 PM
jetfixrguy
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

SOLD PENDING FUNDS.
 

08-03-2010 04:26 AM  9 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Miscellaneous
FS: 600 Paddles and Tail Blades 📷
latesleeper 1 299 08-08-2010 09:07 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

FS: 600 Paddles and Tail Blades
Selling off some unused parts from my 600:

Curtis Youngblood 3mm Paddles:
SOLD

Curtis Youngblood Tail Blades 92mm:
SOLD

Curtis Youngblood Tail Blades 92mm:
SOLD

Align Black Carbon Paddles 3mm:
Used $15+$3 shipping

Paypal and Continental US only please.


Gently Used Align Carbon Paddles
 

08-02-2010 01:47 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: Thunderpower TP-1010C Charger 📷
latesleeper 6 604 08-03-2010 12:34 PM
jetfixrguy
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Offers?
 

08-02-2010 01:44 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: JR DS8900G Servo SOLD 📷
latesleeper 1 512 08-02-2010 01:44 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

ttt

It's boxed up and ready to ship via USPS Priority Mail.
 

08-01-2010 08:45 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: Thunderpower TP-1010C Charger 📷
latesleeper 6 604 08-03-2010 12:34 PM
jetfixrguy
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Price reduced to $90 shipped.
 

08-01-2010 03:23 AM  9 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: JR DS8900G Servo SOLD 📷
latesleeper 1 512 08-02-2010 01:44 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

FS: JR DS8900G Servo SOLD
I'm selling my gently used JR DS8900G servo. This was used briefly for about 1/2 gallon on my 700N. Include original packaging, servo wheels/arms, and mounting screws.

[B]SoldB]

Paypal and Continental US buyers only please.

 

07-31-2010 04:08 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: Thunderpower TP-1010C Charger 📷
latesleeper 6 604 08-03-2010 12:34 PM
jetfixrguy
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Throwing in a FlightPower V-Balance in the deal.
 

07-31-2010 02:22 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: Thunderpower TP-1010C Charger 📷
latesleeper 6 604 08-03-2010 12:34 PM
jetfixrguy
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Reduced price to $100 shipped.
 

07-30-2010 11:11 PM  9 years ago
TopicTopic StarterReplyViewLast Post
•🏬Classified Feedback and Mediate
Classified Feedback Dallas ( page 1 2 )
Dallas 26 1814 10-01-2019 04:57 AM
Badgerfarm
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback

My Feedback for Dallas
Fast payment. A good person to do business with.

https://rc.runryder.com/t596785p1/
 

07-30-2010 11:10 PM  9 years ago
TopicTopic StarterReplyViewLast Post
•🏬Classified Feedback and Mediate
Classified Feedback Turner0022
Turner0022 17 1048 01-23-2014 04:26 AM
Friday Fly Day
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback

My Feedback for Turner0022
Fast payment. Great person to work with.

https://rc.runryder.com/t598027p1/
 

07-30-2010 11:08 PM  9 years ago
TopicTopic StarterReplyViewLast Post
•🏬Classified Feedback and Mediate
Classified Feedback Tauscnc
tauscnc 12 839 08-13-2016 03:42 AM
GM1
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback

My Feedback for Tauscnc
Great person to work with.

https://rc.runryder.com/t598618p1/?p=4940256#RR
 

07-30-2010 09:33 PM  9 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: Thunderpower TP-1010C Charger 📷
latesleeper 6 604 08-03-2010 12:34 PM
jetfixrguy
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

FS: Thunderpower TP-1010C Charger
I'm selling my Thunderpower 1010C charger. It's in great shape and includes data cable for a TP balancer. Firmware has been updated to v2.3A. I don't have a TP balancer to go with this deal so I'll throw in a Flightpower V-Balance.

SOLD

Paypal and Continental US only please.

 

07-30-2010 09:08 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Engines & Mufflers
FS: OS91SZ w/ Cline Regulator. Good rebuild motor. 📷
latesleeper 2 290 07-30-2010 09:08 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

SOLD
 

07-30-2010 03:34 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Engines & Mufflers
FS: OS91SZ w/ Cline Regulator. Good rebuild motor. 📷
latesleeper 2 290 07-30-2010 09:08 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Reduced price from $75 to $60.
 

07-30-2010 05:52 AM  9 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Engines & Mufflers
FS: OS91SZ w/ Cline Regulator. Good rebuild motor. 📷
latesleeper 2 290 07-30-2010 09:08 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

FS: OS91SZ w/ Cline Regulator. Good rebuild motor.
I'm selling my OS91SZ w/ Cline mod carb. The engine needs new piston, cylinder liner, and ring. It would be a good rebuild motor or use carb, head, crankcase for parts.

SOLD.

Paypal and Continental US only please.

 

07-30-2010 05:33 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter e-Classifieds - Miscellaneous
FS: Align 425C Blades(New) and MAH 425 Blades(Used) 📷
latesleeper 2 466 07-30-2010 05:33 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

PM sent back.
 

07-30-2010 04:10 AM  9 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter e-Classifieds - Miscellaneous
FS: Align 425C Blades(New) and MAH 425 Blades(Used) 📷
latesleeper 2 466 07-30-2010 05:33 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

FS: Align 425C Blades(New) and MAH 425 Blades(Used)
Selling off some of my extra blades that I don't need.

Align 425C Blades - New and unopened $30 Shipped.

MAH 425 Blades - Used, no chips or scrapes. Fantastic shape. $25 Shipped.

SOLD.

Paypal and Continental US only please.

 

07-30-2010 03:37 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
Align 75 AMP ESC w/ CC BEC 📷
latesleeper 2 342 07-30-2010 03:37 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

PM sent back.
 

07-30-2010 02:59 AM  9 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
Align 75 AMP ESC w/ CC BEC 📷
latesleeper 2 342 07-30-2010 03:37 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Align 75 AMP ESC w/ CC BEC
Selling some electronics that I have sitting on the bench not doing anything.

Align 500L Motor- Used 40 Flights on my Trex 500, works fine. SOLD

Align RCE-BL75G ESC - Used 20 Flights. You'll need an external BEC to use with this. Does not have integrated BEC. Will throw in Castle CC-BEC 10 AMP Peak. SOLD.

Futaba S9257 tail servo - Used 20 flights, works fine. It ran on regulated 5.1 volts on all flights. SOLD

Paypal and continental US only please.

It will ship by USPS priority.

 

07-24-2010 01:04 AM  9 years ago
TopicTopic StarterReplyViewLast Post
 Sold  ••🚁Helicopter Classifieds - Electronics
FS: Align 3G Electronics w/ 700 Head and USB 3G Link Programmer 📷
latesleeper 4 690 07-24-2010 01:04 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Sold.
 

07-21-2010 03:03 PM  9 years ago
TopicTopic StarterReplyViewLast Post
 Sold  ••🚁Helicopter Classifieds - Electronics
FS: Align 3G Electronics w/ 700 Head and USB 3G Link Programmer 📷
latesleeper 4 690 07-24-2010 01:04 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Any offers?
 

07-21-2010 03:58 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter e-Classifieds - Elec Helicopters
FS: Low Flight Time Trex 250SE with case, batteries and spare parts. 📷
latesleeper 6 819 07-21-2010 03:58 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Sold
 

07-21-2010 02:03 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter e-Classifieds - Elec Helicopters
FS: Low Flight Time Trex 250SE with case, batteries and spare parts. 📷
latesleeper 6 819 07-21-2010 03:58 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Sold. Pending funds.
 

07-20-2010 09:51 PM  9 years ago
TopicTopic StarterReplyViewLast Post
 Sold  ••🚁Helicopter Classifieds - Electronics
FS: Align 3G Electronics w/ 700 Head and USB 3G Link Programmer 📷
latesleeper 4 690 07-24-2010 01:04 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

$260 shipped.
 

07-20-2010 09:51 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter e-Classifieds - Elec Helicopters
FS: Low Flight Time Trex 250SE with case, batteries and spare parts. 📷
latesleeper 6 819 07-21-2010 03:58 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

$350 shipped.
 

07-20-2010 01:19 AM  9 years ago
TopicTopic StarterReplyViewLast Post
 Sold  ••🚁Helicopter Classifieds - Electronics
FS: Align 3G Electronics w/ 700 Head and USB 3G Link Programmer 📷
latesleeper 4 690 07-24-2010 01:04 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Reduced asking price from $300 to $280.
 

07-19-2010 03:12 AM  9 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
 Sold  ••🚁Helicopter Classifieds - Electronics
FS: Align 3G Electronics w/ 700 Head and USB 3G Link Programmer 📷
latesleeper 4 690 07-24-2010 01:04 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

FS: Align 3G Electronics w/ 700 Head and USB 3G Link Programmer
I'm selling my Align 3G electronics and 700 head with USB dongle programmer. Worked fine for me, went back to flybar because I don't have time to mess with settings. Used for about 1/2 half gallon of flights on my 700N.

Firmware updated to v2.1.

$260.00 shipped by USPS Priority. Payapal and Continental US only.

Thanks.

 

07-19-2010 02:44 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter e-Classifieds - Elec Helicopters
FS: Low Flight Time Trex 250SE with case, batteries and spare parts. 📷
latesleeper 6 819 07-21-2010 03:58 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Any offers?
 

07-17-2010 01:26 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter e-Classifieds - Elec Helicopters
FS: Low Flight Time Trex 250SE with case, batteries and spare parts. 📷
latesleeper 6 819 07-21-2010 03:58 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Reduced asking price from $400.00 to $375.00.
 

07-16-2010 01:24 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter e-Classifieds - Elec Helicopters
FS: Low Flight Time Trex 250SE with case, batteries and spare parts. 📷
latesleeper 6 819 07-21-2010 03:58 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Added more pictures.
 

07-15-2010 02:13 PM  9 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter e-Classifieds - Elec Helicopters
FS: Low Flight Time Trex 250SE with case, batteries and spare parts. 📷
latesleeper 6 819 07-21-2010 03:58 AM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

FS: Low Flight Time Trex 250SE with case, batteries and spare parts.
I'm selling my Trex 250SE. Includes many spare parts. Spare set carbon fiber main blades and plastic tail blades. Also including Align carrying case and four 30C Align batteries. Very low flying time on batteries and heli. Just BNF to your Spektrum transmitter (setup your throttle and pitch curves of course).

Trex 250SE
DS410 cyclic servos
Stock Align motor
Spartan Quark Gyro
JR DS290G Servo
Spekrum 6110E receiver

Canopy has stress cracks on the bottom of it where it meets the frame.

$350 shipped. Continental US, paypal only please. This will be shipped UPS Ground because of the lipos.

 

07-08-2010 11:33 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: GP750, GP780 and DS420 📷
latesleeper 2 565 07-08-2010 11:33 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

All items sold.
 

07-08-2010 01:40 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: GP750, GP780 and DS420 📷
latesleeper 2 565 07-08-2010 11:33 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Bump! Reduced asking price.
 

07-07-2010 04:34 AM  9 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: GP750, GP780 and DS420 📷
latesleeper 2 565 07-08-2010 11:33 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

FS: GP750, GP780 and DS420
I'm selling some very lightly used electronics. These came bundled with my Trex 450 and Trex 250.

Align GP750 - $60 shipped.
Align GP780 - $75 shipped.

I will throw in an Align DS420 servo if you buy one of the gyros for an extra $10.

Paypal only. This will be shipped by USPS Priority. Continental US buyers only please.

 

06-13-2010 10:48 PM  9 years ago
TopicTopic StarterReplyViewLast Post
•🏬Classified Feedback and Mediate
Classified Feedback scott222
scott222 1 240 06-13-2010 10:48 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback

My Feedback for scott222
Receives positive feedback regarding this post.

Great person to work with.
 

06-07-2010 03:00 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
G770 3D and AR7100R 📷
latesleeper 9 785 06-13-2010 08:16 PM
scott222
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Lowered price for gyro.
 

06-05-2010 10:50 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
G770 3D and AR7100R 📷
latesleeper 9 785 06-13-2010 08:16 PM
scott222
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

AR7100R sold.

Lowered price on the gyro.
 

06-05-2010 01:49 AM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
G770 3D and AR7100R 📷
latesleeper 9 785 06-13-2010 08:16 PM
scott222
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Sent you a PM scott222.
 

06-02-2010 11:48 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
G770 3D and AR7100R 📷
latesleeper 9 785 06-13-2010 08:16 PM
scott222
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

$85 for the gyro.

$180 for the receiver.
 

06-01-2010 03:27 PM  9 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
G770 3D and AR7100R 📷
latesleeper 9 785 06-13-2010 08:16 PM
scott222
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Lowered asking prices.
 

06-01-2010 02:45 AM  9 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
G770 3D and AR7100R 📷
latesleeper 9 785 06-13-2010 08:16 PM
scott222
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

G770 3D and AR7100R
I have a JR G770 3D gyro. Only 10 flights on it if that. Also has the box, instructions and the double sided tape.
$75 OBO shipped.

Brand new, sealed and never opened Spektrum AR7100R. This was going to go in a new build but decided to hold off.
SOLD

Continental US and Paypal only please.

Thanks.
 

02-16-2010 04:07 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Flybarless Rotor Head Systems
Align FBL not always initializing..
Locktite 14 847 02-16-2010 04:13 AM
w12martin
latesleeper

rrApprentice

OH

I rerouted my sensor wire away from possible sources of interference. When I initially setup my 3G I had the sensor wire running between servos and bundled with my cyclic servo wires on my 700. I was having the same issue of taking one or two power cycles to get the unit to initialize. Since I've seperated the sensor wire away from the other servo wires the unit has been initializing consistently on the bench.
 

02-07-2010 01:12 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Flybarless - Align 3G
FBL / 700N rocks! - flight report ( page 1 2 )
wings19 23 2400 02-08-2010 03:43 AM
Sterling500
latesleeper

rrApprentice

OH

Thank Wings for posting that up. I'm in process of setting up my 700. Great writeup on your review.

There's talk on the other forum about only one set of leads powering the 3G unit which then power the four servos. They've also posted up a work around by setting up an "external" power bus to work around this.
 

02-07-2010 12:51 AM  9 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Flybarless - Align 3G
FBL / 700N rocks! - flight report ( page 1 2 )
wings19 23 2400 02-08-2010 03:43 AM
Sterling500
latesleeper

rrApprentice

OH

Would you mind posting up your spacing on the servo wheel on your tail servo? Some guys were saying 10MM wasn't enough.
 

08-16-2009 02:51 AM  10 years ago
TopicTopic StarterReplyViewLast Post
Closed •🌌Off Topics Main Discussion
DONT BUY FROM GRANDRC.COM!!! 📷 ( page 1 2 3 4 ... Last page )
specialtydevice 135 7667 08-21-2009 04:49 AM
Efrog
latesleeper

rrApprentice

OH

Its a chinese guy that answers the phone, if you can get him.
That's just great.

Purchased many items from this shop with no issues. USPS lost a set of blades that I ordered from them. They went ahead and sent another set to me.
 

06-24-2009 04:01 AM  10 years ago
TopicTopic StarterReplyViewLast Post
🏠Home Vendor Promoted Content
INERITA RC - 50% Promo Offer 📷 ( page 1 2 3 4 ... Last page )
Inertia RC 93 6614 06-29-2009 12:54 AM
Inertia RC
latesleeper

rrApprentice

OH

I was at the field today and saw Alex Rodriguez flying around with one on his 700. His flight look great with all the crazy piro stuff he was doing. It seemed to be doing its job well.

I'm going in with a buddy on this to split the savings.
 

03-26-2009 02:39 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
700N Fuel Needle Settings for Align 91H and OS 91 HZ Engines ( page 1 2 )
Rockohaulic 31 8319 04-20-2009 12:18 PM
daniele76
latesleeper

rrApprentice

OH

It would be great if you guys could indicate if you are using an extra shim.

I'm running 1.5 turns mid, 1.5 turns high, 30% Youngblood,SB20 pipe, with extra head shim on my OS91HZ (no pump).
 

01-19-2009 01:50 AM  10 years ago
TopicTopic StarterReplyViewLast Post
Closed ••🚁Helicopter Align - T-REX 700N
Radix 105 Tails - Bolts too big!
latesleeper 2 391 01-19-2009 01:50 AM
latesleeper
latesleeper

rrApprentice

OH

I figured it out... the brass sleeves is a little smaller on one blade grip compared to it's sister blade. I can get the bolt through one but not the other. I'll try using a round file to open it up a bit.
 

01-19-2009 01:30 AM  10 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
Closed ••🚁Helicopter Align - T-REX 700N
Radix 105 Tails - Bolts too big!
latesleeper 2 391 01-19-2009 01:50 AM
latesleeper
latesleeper

rrApprentice

OH

Radix 105 Tails - Bolts too big!
I picked up a set of Radix 105mm tail blades for my 700 and the shoulder bolts are too big to fit through the brass sleave of the blade in the blade root. Anyone encounter this? I have Radix 95mm tail blades on my 600 with no issues.
Are not they the same tail hubs and grips?
 

01-17-2009 02:22 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
New Derlin MainDrive Gear 📷 ( page 1 2 3 )
george0079 50 5044 03-30-2009 04:59 PM
johnsalary
latesleeper

rrApprentice

OH

I'm guessing the machined delrin gear should be quieter too. At least that's the way the Hirobos were when switching out the plastic gears for the expensive delrin.
 

01-04-2009 06:22 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
Tail Pushrod, Carbon Side Issues. 📷 ( page 1 2 )
Gyronut 23 1891 01-04-2009 02:08 PM
leady
latesleeper

rrApprentice

OH

Mine was loose. I used about an inch of heatshrink on each end to keep it nice and tight.
 

01-03-2009 08:38 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Engines Plugs Mufflers Fuel
YS SR vs the new OS HZ 📷 ( page 1 2 3 4 ... Last page )
buburub 106 15239 05-23-2011 12:43 PM
deafheliflyer
latesleeper

rrApprentice

OH

So are people adding the extra shim in the HZ non pump for 30%? I haven't flown mine yet, it currently does not have the extra shim in it. Waiting for warmer weather.
 

01-03-2009 07:50 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
engine trouble
digger 4 524 01-04-2009 03:40 AM
Gulf Driver
latesleeper

rrApprentice

OH

Sounds like you went lean. You what muffler were you using? Maybe there was a problem with the fuel lines.
 

01-03-2009 03:42 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
Tail Rudder control rod getting jammed...? 📷 ( page 1 2 )
outkast1779 27 1336 01-03-2009 03:00 PM
Rototerrier
latesleeper

rrApprentice

OH

Shove the end of a zip tie in the guide and use wire cutters to trim the excess zip tie.
 

01-03-2009 03:12 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Radio - Futaba FASST
futaba 611 gyro servo question
4 stroke flyer 10 736 01-04-2009 12:53 AM
4 stroke flyer
latesleeper

rrApprentice

OH

How many flights do you have on this gyro/servo combo? Maybe the servo is done. Since it's cold out why not send it in to Hobby Services at Tower? The turnaround time is reasonable.
 

01-03-2009 03:09 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Kyosho Caliber/Quest Neo-Caliber series
KYOSHO NEXUS 30?? ( page 1 2 )
Rbush 27 9445 03-10-2010 01:54 AM
sharam
latesleeper

rrApprentice

OH

A buddy of mine from work as a Nexus 30 that he never flew. He put it together and started the engine but that was it. I was asked to help him set up the links and trim it out. Why not try out something different. Hopefully I can get it going...
 

01-03-2009 03:03 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align
Who makes the best Bearings
Irish886 16 1042 01-03-2009 05:35 PM
Nimble Thumbs
latesleeper

rrApprentice

OH

No issues with rc-bearings.com.

Price is right and better quality than the align bearings.
 

01-03-2009 03:01 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
Tail Rudder control rod getting jammed...? 📷 ( page 1 2 )
outkast1779 27 1336 01-03-2009 03:00 PM
Rototerrier
latesleeper

rrApprentice

OH

You could try enlarging the tail guides with a drill and appropriate sized drill bit. Another idea is to lube the control rod with silicon shock oil for rc cars.
 

01-03-2009 01:34 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
fuel tank plug leaking 📷 ( page 1 2 )
SuperSixTwo 22 4992 07-02-2010 11:51 AM
frickey295
latesleeper

rrApprentice

OH

Use another clunk grommet and nipple from a 600n tank with a short piece of fuel tubing and a fuel line plug. It seems to fit okay with the spares that I have sitting here.

http://www.readyheli.com/HN6083_Fue...ro_p/hn6083.htm

Same idea as Jaxrotor but with an align part.
 

01-01-2009 06:51 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
Servo install question
uf-engineer 7 423 01-01-2009 07:38 PM
duke666
latesleeper

rrApprentice

OH

Do not over tighten them by smashing the grommets like pancakes.
 

01-01-2009 05:49 PM  10 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: JR R1221 2.4 Receiver (NEW) 📷
latesleeper 4 404 01-01-2009 05:49 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Closing this out. Maybe I'll relist it another time later.
 

01-01-2009 05:44 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
Servo install question
uf-engineer 7 423 01-01-2009 07:38 PM
duke666
latesleeper

rrApprentice

OH

Yes, use the rubber grommets. You do not use the brass eye inserts.
 

12-29-2008 07:52 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
AR7100R Sensor routing on 700 📷
latesleeper 2 665 12-29-2008 07:52 PM
latesleeper
latesleeper

rrApprentice

OH

Thanks for the pics. I went ahead and used a servo extention.
 

12-29-2008 07:49 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
Main shaft too big ( page 1 2 )
scott s. 27 1286 01-01-2009 12:17 AM
jpla010
latesleeper

rrApprentice

OH

The mainshaft that came in my kit was not right either. Tried using metal polish and gave up. Got another mainshaft and it fit fine.
 

12-26-2008 08:23 PM  10 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
AR7100R Sensor routing on 700 📷
latesleeper 2 665 12-29-2008 07:52 PM
latesleeper
latesleeper

rrApprentice

OH

AR7100R Sensor routing on 700
How did you guys route the wire for the crankshaft sensor on the 700? Just going through my setup and trying to clean it up a bit. If I route it between the frames, the wire is too short to reach the receiver. I guess I could use a servo extention but not sure if that's okay. If I route the sensor wire outside the frame, it's not very clean. The receiver is mounted on the top part of the electronics tray.
 

12-24-2008 06:12 PM  10 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: JR R1221 2.4 Receiver (NEW) 📷
latesleeper 4 404 01-01-2009 05:49 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Bump!
 

12-24-2008 06:11 PM  10 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: Duralite 7V HD Regulator and 1.5V Stepdown 📷
latesleeper 2 419 12-24-2008 06:11 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Bump!
 

12-12-2008 04:34 AM  10 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: Duralite 7V HD Regulator and 1.5V Stepdown 📷
latesleeper 2 419 12-24-2008 06:11 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Bump... lower price.
 

12-12-2008 04:33 AM  10 years ago
TopicTopic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: JR R1221 2.4 Receiver (NEW) 📷
latesleeper 4 404 01-01-2009 05:49 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

Bump! Price reduced.
 

12-08-2008 12:46 AM  10 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: JR R1221 2.4 Receiver (NEW) 📷
latesleeper 4 404 01-01-2009 05:49 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

FS: JR R1221 2.4 Receiver (NEW)
Sellling a brand new, never used JR R1221 2.4 Receiver with satellites.

$140 Shipped OBO. Continental US buyer only. Paypal only please.

 

12-08-2008 12:25 AM  10 years ago
Topic Vote0Post 1
Topic Opening Post
Topic StarterReplyViewLast Post
Closed  Sold  ••🚁Helicopter Classifieds - Electronics
FS: Duralite 7V HD Regulator and 1.5V Stepdown 📷
latesleeper 2 419 12-24-2008 06:11 PM
latesleeper
latesleeper

rrApprentice

OH

My Classified Activity
My Classified Feedback
Add Classified Feedback

FS: Duralite 7V HD Regulator and 1.5V Stepdown
I'm selling a Duralite 7V HD Regulator and 1.5V Stepdown(for gyro.)
Used for about 20 flights. Comes with Y connector harness for the receiver connection and a heavy duty power switch.

$40 Shipped OBO. Contental US buyers only. Paypal only please.

 

11-30-2008 02:59 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
os 50 hyper WINTER high speed needle setting reports ( page 1 2 )
itsjojo 23 1914 12-19-2008 10:08 PM
itsjojo
latesleeper

rrApprentice

OH

That's the pain with flying in the cold. It's always on the back of my mind that my motor could be running too lean from summer settings. Maybe running a 1/8 to 1/4 turn richer to be on the safe side?
 

11-30-2008 02:53 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 700N
Another maingear stripped.. 📷 ( page 1 2 3 4 )
MrMel 61 6847 12-27-2008 09:15 PM
tfagermoen
latesleeper

rrApprentice

OH

I'm reading about mixed causes for the main gear stripping. Some are saying it the clutch stack bearing block and some are the maingear. There's an interesting read on the other forum about the clutch bearing block ovaling out where the bearing is set. The ovaling seems to be caused by the torque of the motor and flexing of the plastic block.... hard manuvers like tick tocks and pitch pumping.

If the clutch bearing block is the cause then this new maingear will not help.
 

11-16-2008 05:45 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Main Discussion
GeekBrief.TV coverage of RC heli hobby 📷 ( page 1 2 3 )
red_z06 44 3059 08-02-2009 10:15 AM
TINY
latesleeper

rrApprentice

OH

You can clearly see that one of the servos on the swash needs to be reversed. I also did not see the stickers on the paddles, unless he used clear tape.

The guy needs some direction.
 

11-16-2008 04:55 AM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Main Discussion
GeekBrief.TV coverage of RC heli hobby 📷 ( page 1 2 3 )
red_z06 44 3059 08-02-2009 10:15 AM
TINY
latesleeper

rrApprentice

OH

Yes! Someone should contact GeekBrief and show them how helis really fly.
 

10-25-2008 08:19 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Christmas Gift - 600N Super Pro 📷
MattHarper 11 818 10-28-2008 02:44 PM
Jag72
latesleeper

rrApprentice

OH

No issues with stock plastic fan. The NSP kit rocks... buy spare crash parts. The kit as is works great.
 

10-25-2008 08:13 PM  10 years ago
TopicTopic StarterReplyViewLast Post
••🚁Helicopter Align - T-REX 600N
Best 2s rx pack
idigrc2 13 958 11-06-2008 03:51 AM
wolfcbr2003
latesleeper

rrApprentice

OH

The 2S1P 2500 Evolite is a great pack for the 600N. Fits and balances well. I easily get 6 flights and only put in around 1100 Mah. This is with 8717 on cyclic, no regulator.
 
🏠Home View New

3 pages [ <<    <    ( 1 )     2      3     NEXT    >> ]

Wednesday, October 23 - 10:28 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online