RunRyder RC
WATCH
 1 page 140 views Post Reply
03-07-2021 01:44 AM  3 months ago
Topic Vote0Post 1
newraptorguy

rrApprentice

Texas

MyPosts All Forum Topic
💎Sustaining Member
3x on a Raptor 50
Hi Y’ all!

Anyone ever use a 3X on a Raptor 50?

Where did you mount it?

I was planning on mounting it out front on the servo frame, vertical with the servo pins on the top. The issue I had was trying to Figure out what orientation settings to choose in the software. Anyone able to help?

AMA 685330 IRCHA 3966
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2021 01:34 AM  3 months ago
Rojoalfa

rrKey Veteran

Punta de Mata, Monagas-Venezuela

MyPosts All Forum Topic
/
/

A difficult task you choose.

This part of the raptor 50 glow is very weak. Too much Vibrations there to install gyros o flb gyros.

You may try to install the FBL gyro on a solid and thick base over the servo frame table and test for Vibrations.

No other FBL adjust you need.

The best place is on top of boom hub support but some arrangement with longer cable servos you may need if you pick futaba as your TX.

If you are running this 3Gx with spektrum, probably is much easier.

/
Saludos cordiales,
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2021 01:55 AM  3 months ago
newraptorguy

rrApprentice

Texas

MyPosts All Forum Topic
💎Sustaining Member
Rojoalfa,

Thanks for the reply. I suspected it would be best to mount the 3X back where the gyro's are typically mounted on the Raptor. I will have to get ahold of some servo extensions if I choose to go that route.

Thanks again!
AMA 685330 IRCHA 3966
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2021 02:12 PM  3 months ago
Rojoalfa

rrKey Veteran

Punta de Mata, Monagas-Venezuela

MyPosts All Forum Topic
/
/

It is not a problem to install the Align 3gx on different locations on the raptor 50.
You only need to follow the rule base on the arrow shape-heli on top.

No other calculation or setting you need.

There are FBL gyro like WOOKONG-H, that need more info on the exact location of the gyro related to the main shaft.

/
Saludos cordiales,
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2021 04:54 PM  3 months ago
rotorist

rrNovice

Pittsburgh,Pa. USA

MyPosts All Forum Topic
Rojoalfa /
/

It is not a problem to install the Align 3gx on different locations on the raptor 50.
You only need to follow the rule base on the arrow shape-heli on top.

No other calculation or setting you need.

There are FBL gyro like WOOKONG-H, that need more info on the exact location of the gyro related to the main shaft.

/
The OP is asking about a Bavarian Denon 3X, not an Align unit.

.
SHARE  PM  EMAIL  Attn:RR  Quote
03-09-2021 02:53 PM  3 months ago
Rojoalfa

rrKey Veteran

Punta de Mata, Monagas-Venezuela

MyPosts All Forum Topic
/
/

Oh! Certainly...

I got confused thinking about align 3GX...

/
Saludos cordiales,
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 140 views Post Reply
Print TOPIC

 2  Topic Subscribe

Wednesday, June 23 - 4:36 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online