WATCH |
1 page 77 views | Post Reply |
RunRyder | RunRyder |
![]() |
![]() |
falcon888
rrNewbie France. |
Need help with radio interferance with my helicopter Hi peeps im renovating an old hirobo falcon 888 and have changed the old nitro engine with a gasser ngh g17 and im having lost of problems with the interference from the ignition system ive tried moving it as far from the reciever as possible and it doesnt help, would changing frequecies help.im still using the original reciever and servos. has anyone had this problem and how did you get over it? |
SHARE PM EMAIL Attn:RR Quote |
![]() rrVeteran Mercerville, NJ, USA 💎Sustaining Member |
|
SHARE PM EMAIL GALLERY Attn:RR Quote |
falcon888
rrNewbie France. |
|
SHARE PM EMAIL Attn:RR Quote |
falcon888
rrNewbie France. |
|
SHARE PM EMAIL Attn:RR Quote |
![]() rrVeteran Mercerville, NJ, USA 💎Sustaining Member |
![]() |
SHARE PM EMAIL GALLERY Attn:RR Quote |
![]() rrKey Veteran Punta de Mata, Monagas-Venezuela |
/So, your heli has a CDI with its own battery.Your receiver also has a battery.Try to run both systems independent as posible. Check all cables on your helicopter, need to be as straight as possible, avoiding "pigtail".Isolate the servo which have the interference. Install a ferrite ring in the servo's cable.If your are using bec's, install ferrite ring to cable output to receiver or CDI.Do always a range check prior to fly your gadget.Tail servo... It is always the problem. Check the double side tape and try different types, softer or harder... Don't forget the ferrite rings.Boom supports... Avoid that FM antenna may not be parallel to boom support and far away the CDI cables./ |
SHARE PM EMAIL GALLERY Attn:RR Quote |
WATCH |
1 page 77 views | Post Reply |
RunRyder | RunRyder |
![]() |
![]() |
Wednesday, March 3 - 3:37 pm - Copyright © 2000-2021 RunRyder EMAIL • Enable Cookies