RunRyder RC
WATCH
 1 page 81 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsBrain iKon › Event Code 111 Decelaration >= 16g
01-30-2021 04:51 PM  30 days ago
Topic Vote0Post 1
Heli-Gregory

rrNovice

Franklin, OH

MyPosts All Forum Topic
Event Code 111 Decelaration >= 16g
I am getting the subject error code on the events log and it fill the log from one flight. The heli also shows a much higher head speed than my other Gaui X5. Both are using the same motor and motor gear and both have hobbywing ESC. I am not sure I set the throttle points on the Gaui in question so, that is my next step. Any ideas what the error codes is.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-03-2021 06:05 PM  26 days ago
Heli-Gregory

rrNovice

Franklin, OH

MyPosts All Forum Topic
From the folks at MSH Support. If it's a stuck accelerometer perhaps, then a few hard taps on the top of the case with your finger may well fix it.

I tried this and did not work. I am waiting on a response from MSH Development on the issue. I will let you know what I find out, incase someone else runs into this problem. I will say I did have and pretty hard crash that may have caused this.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-03-2021 08:23 PM  25 days ago
Rojoalfa

rrKey Veteran

Punta de Mata, Monagas-Venezuela

MyPosts All Forum Topic
/
/

I see this report on different chats... And probably is related to a recent firmware update.

For me, it is a pour written software.

Thinking about Warning that your heli is doing while flying a Decelaration for more than 16G...I mean 16 times gravity acceleration...

it is quite absurd!!!

Probably, that program is trying to inform you that Decelaration is less than 16G... Make more sense... Isn't?

I recall my grandmother... When the TV set wasn't working, she solve the easy way... She hit the console and the image came alive...

No my friend, hitting a gyro??? don't do that!

/
Saludos cordiales,
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2021 02:52 PM  11 days ago
Heli-Gregory

rrNovice

Franklin, OH

MyPosts All Forum Topic
Getting a NEW IKON
From what I have been told the accelerometer is either broken and has a broke connection. I have also been told my MSH Support that it is used for auto level or rescue. I am not confident of the IKON at this point so I have a new one coming. I think what happened is when I upgraded the Gaui X5 from version 1 to version 2 I pried the IKON off of the mounting to relocate it to the new spot. I did us a knife to cut the pad but also put a lot of pressure on the case. this may have torqued the board and loosened a weak solder joint. So for you IKON users out there it is important to take extra care when removing the device. Lesson Learned.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2021 06:54 PM  11 days ago
Rojoalfa

rrKey Veteran

Punta de Mata, Monagas-Venezuela

MyPosts All Forum Topic
/
/

Oh.. My...

FBL gyros have strong boxes but not so much.

/
Saludos cordiales,
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 81 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsBrain iKon › Event Code 111 Decelaration >= 16g
Print TOPIC

 2  Topic Subscribe

Monday, March 1 - 7:07 pm - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online