RunRyder RC
WATCH
 1 page 148 views Post Reply
Home✈️Aircraft🚁HelicopterHelicopter Main Discussion › Align 100A ESC No BEC voltage
12-18-2020 06:49 PM  3 months ago
Topic Vote0Post 1
ov10mech

rrNovice

Lake County, Illinois

MyPosts All Forum Topic
Align 100A ESC No BEC voltage
On of these ESCs came in my new 500X kit. When powered the motor beeps and pulses but I have no BEC output in the batt lead or the throttle lead. Is there anything else I can check before returning. Have not done a build in 10 years so I might be missing something.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-19-2020 02:08 AM  3 months ago
RM3

rrElite Veteran

Killeen, Texas - USA

MyPosts All Forum Topic
I have an old ESP model with the same esc... you need to run a separate becshowing a preference will only get you into trouble, 90% of everything is crap...
SHARE  PM  EMAIL  Attn:RR  Quote
12-19-2020 08:15 AM  3 months ago
JLF92677

rrApprentice

Southern California

MyPosts All Forum Topic
ov10mech Align 100A ESC No BEC voltage
On of these ESCs came in my new 500X kit. When powered the motor beeps and pulses but I have no BEC output in the batt lead or the throttle lead. Is there anything else I can check before returning. Have not done a build in 10 years so I might be missing something.
What is the ESC model #, is it RCE-BL100A ? If it is, then refer to page 3 of the attached ESC manual link below. Cable C is the throttle control cable which also provides BEC voltage. Cable B is dedicated BEC cable.

http://www.align.com.tw/ManuaLib/He...E-BL%20100A.pdf
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
12-20-2020 07:24 PM  3 months ago
ov10mech

rrNovice

Lake County, Illinois

MyPosts All Forum Topic
There is no voltage coming out of either of those leads.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-20-2020 08:11 PM  3 months ago
JLF92677

rrApprentice

Southern California

MyPosts All Forum Topic
ov10mech There is no voltage coming out of either of those leads.
Based on your response I take it that the Align ESC you have is RCE-BL100A. So if you are not getting any voltage out of either lead, then you must have a defective ESC. Contact your seller.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 148 views Post Reply
Home✈️Aircraft🚁HelicopterHelicopter Main Discussion › Align 100A ESC No BEC voltage
Print TOPIC

 3  Topic Subscribe

Thursday, April 15 - 6:21 am - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online