RunRyder RC
WATCH
 1 page 18 views Post Reply
Home✈️Aircraft🛩️Fixed-WingFixed-Wing Main Discussion › ZENOAH G38 AND RCEXL KILL SWITCH
11-21-2020 09:32 PM  1 day ago
Topic Vote0Post 1
MattJen

rrElite Veteran

UK

MyPosts All Forum Topic
ZENOAH G38 AND RCEXL KILL SWITCH
Hi Folks
I have been scratching my head on wiring this kill switch onto my G38, I get the end that goes into my RX, the other end into a 6volt NIMH, it was where to wire it onto the G38,
I see the ground wire, which i guess is where the black wire from kill switch is splined onto.

I guess the LIVE goes to the Live on Coil ?? this little bit of wire sticking out ?

Any step by step instructions would be greatly appreciated as I am not a Sparky..

All The Best
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-23-2020 01:36 AM  17 hours ago
balsabasher

rrVeteran

Central Ohio, USA

MyPosts All Forum Topic
You have the wrong kill switch. That one is made for electronic ignitions.
You need one like this; https://www.mr-rcworld.co.uk/shop/z...fe-kill-switch/
On your engine coil, the small wire on the back is the ground from the coil to the engine, don't cut it...The small black wire on the front is where you solder your wire that goes to the above kill switch. Connect the other end of the wire to the NC connection on the kill switch. Then install a grounding wire from the common connection on the kill switch to the engine case to ground it. Instruction are included with the kill switch on how to hook up the switch to your receiver and how to operate the switch.
When you ground the small wire on the front of the coil, the engine will die...
Blades; what goes around, comes around!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 18 views Post Reply
Home✈️Aircraft🛩️Fixed-WingFixed-Wing Main Discussion › ZENOAH G38 AND RCEXL KILL SWITCH
Print TOPIC

 1  Topic Subscribe

Monday, November 23 - 7:14 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online