RunRyder RC
WATCH |
1 page 25 views | Post Reply |
| RunRyder | Scorpion Power |
|
|
0| ChrisMatthews
rrNovice Vernon, CT - USA |
Whiplash Gasser Tail Servo horn What seems to be the best servo horn for the tail servo these days? There is very minimal clearance under the tail boom to the center of the servo arm, approx 21mm, so the arm needs to be a short one. The build manual calls for the ball to be 14mm from the center. I currently have a plastic arm attached to an MKS HBL880 which has an 8mm shaft. I figure there has to be a better solution than the plastic servo horn. Since its difficult to center my current servo horn, I thought maybe an adjustable might work, but it is difficult to find the correct length. Any suggestions? |
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
 Rojoalfa
rrKey Veteran Punta de Mata, Monagas-Venezuela |
ChrisMatthews The build manual calls for the ball to be 14mm from the center. /That the most important thing about it.Since you don't need a high torque servo there but fast, you don't need any other consideration here./ |
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
WATCH |
1 page 25 views | Post Reply |
| RunRyder | Scorpion Power |
|
|
Tuesday, September 29 - 1:38 am - Copyright © 2000-2020 RunRyder EMAIL • Enable Cookies
