RunRyder RC
WATCH |
1 page 270 views | POST REPLY |
| Scorpion Power | RunRyder |
|
|
0| flustercluck
rrVeteran Newnan Ga (Just S. of ATL)
|
**SOLD** 700E DFC: Full BNF, Just Add Batts, Aggressive Price!!** SOLDHi gentlemen!I have two Align 700E DFC's, and really only need one. So I'm putting my spare one up for sale at an aggressive price (since I bought it at a good price).And that really good price is: $515+shipping!If you're in the Southeast, shipping would be about $35-$40, so, $550-560 all-in, shipped. If you're west of the Mississippi, we'd have to work out something on shipping.But basically, a 700 for more like a 500 or 550 price. And did I mention: Full BNF? All you add is your two 6S 5000mah flight packs. If you ever wanted an "intro" 700-size electric for a good price, this may be your gal.She has a Hobbyking 'Assault 700' CF airframe. This particular frame is an Align copy, only differing slightly at the nose area.Details:
2S/2200mah 7.4V rx-servo pack (Pulse) Hitec 5585HV's on cyclic Savox on tail Align motor 800MX (6 flights) Castle Edge 120HV w/ XT90 connectors AR7200BX with Sat Align 690mm main blades Align CF oem tail blades CF battery tray with strapsMain blades are nice and clean. I added some tracking tape to one to get better balance. The canopy is an Align oem "Speed" canopy, but for whatever reason, there's no "Speed" fuselage to cover the boom. On the lower port side of the canopy is a repainted fiberglass repair- it's not perfect but good enough for me. Again, since the canopy is not perfect, I've tried to reflect this in the price.The boom is a 700 Nitro DFC boom, which is longer than the "E" boom and IMO, both looks and fits the heli better. The boom support rods are 600-size. So there you go. A solid, nice flying bird needing a pilot to fly her more than I can, or do. Note: that low price is pretty much firm. Can't go any lower. Also: I work near the ATL airport, and can drive a short distance during lunch to meet an interested buyer in the ATL area.Or, if you want to come to my place in Newnan GA, I can even do a short demo flight. Of course, this option eliminates the shipping fees, and we can bind & set up your TX to the heli, so you'll be good to go on the maiden. Finally: I support what I sell. So if you need any help with the FBL controller, I'll be happy to provide as I know the AR7200BX pretty well.I'll get some pics up shortly, and I even took a 2min video clip I can email if you like (it's 350mb at 640x480)Q's? pm me or text me at 678.857.7441thanks, Jeff in ATL                             |
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
| flustercluck
rrVeteran Newnan Ga (Just S. of ATL)
|
|
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
| flustercluck
rrVeteran Newnan Ga (Just S. of ATL)
|
|
| SHARE PM EMAIL GALLERY Attn:RR Quote | |
WATCH |
1 page 270 views | POST REPLY |
| Scorpion Power | RunRyder |
|
|
| Print TOPIC | Make Suggestion |
Classifieds › HELP-FAQ
|
Attention Buyers!
To receive feedback Post Reply in the seller’s topic.
The seller can then click your post's Add Classified Feedback link.
Attention Sellers!
Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process
(and not replied to) will be removed upon request. Click Attn:RR on the offending classified post.
Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware!
RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.
|
Thursday, June 4 - 6:28 am - Copyright © 2000-2020 RunRyder EMAIL • Enable Cookies
