RunRyder RC
WATCH
 1 page 35 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - JR DMSS › Rx bound to XG8 but no servo movement
08-13-2019 07:03 AM  9 days ago
Topic Vote0Post 1
PhilT

rrNovice

Montreal, Canada

MyPosts All Forum Topic
Rx bound to XG8 but no servo movement
Hi everyone
I’ve bound an RG831B to my XG8 the rx is lid solid but no stick controls.
The servos are plugged correctly. Battery feeding the rx is full.
The tail servo is reacting to the gyro but not to rudder stick.
None of the cyclic servos move from tx input.
Both rx and tx are DMSS
Any ideas what’s happening?
SHARE  PM  EMAIL  Attn:RR  Quote
08-13-2019 02:04 PM  9 days ago
Dave's Raptor

rrApprentice

Utah, USA

MyPosts All Forum Topic
Are you using a FBL unit? Servo direct plug to the FBL unit or XBus cable and is the XBus on output A or B?Team HeliDirect, Team Synergy USA, Team Rail Blades
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-13-2019 06:19 PM  9 days ago
PhilT

rrNovice

Montreal, Canada

MyPosts All Forum Topic
Good old flybar. No XBus. Just plain servos and gyro plugged into rx.
I got it to bind and servos now move with sticks. Once bound and if I turn the rx and tx off and back on again, the binding process has to be done all over again. Rx blinking every time it’s turned off and on.
SHARE  PM  EMAIL  Attn:RR  Quote
08-13-2019 07:20 PM  9 days ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
Have to rebind every time you cycle power ???

That sure don’t sound good !
Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-13-2019 07:44 PM  9 days ago
PhilT

rrNovice

Montreal, Canada

MyPosts All Forum Topic
At first when it bound but no stick control it would stay bound after turning off and on.
Now that the control isssue is solved it’s the unbinding problem I have.
So I’m sure it’s not a hardware problem. So frustrating.
SHARE  PM  EMAIL  Attn:RR  Quote
08-14-2019 05:31 AM  8 days ago
PhilT

rrNovice

Montreal, Canada

MyPosts All Forum Topic
Update: I think this is useful info for anyone interested.
The telemetry/remote rx RA01T has to be plugged in before powering up in order for the bind to remain.
SHARE  PM  EMAIL  Attn:RR  Quote
08-14-2019 11:22 AM  8 days ago
Dave's Raptor

rrApprentice

Utah, USA

MyPosts All Forum Topic
Glad that you got it all worked out. I had just read through the manual on that RX. And that was my next question the remote antenna is both a RX and telemetry feed.Team HeliDirect, Team Synergy USA, Team Rail Blades
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 35 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - JR DMSS › Rx bound to XG8 but no servo movement
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, August 23 - 5:24 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online