📱 🚁Helicopter › Gasser heli members from Bakersfield to san francisco

Gasser heli members from Bakersfield to san francisco

Are there any gasser heli pilot members here anywhere from between Bakersfield to san francisco? Thanks

One would be me - Pine Grove

Gasser

Is there a heli club nearby ? What do you fly ? Thanks.

Gold Country Flyers at Ione, CA (goldcountryflyers.com)

I fly Predator gassers, XL 1005's, and Spectra G's.

Tom

Tom

For the 1005 and the spectra you really want to get the bellcrank upgrade kit, it fixes the issue with the stud and prevents a mishap. If you need more info please pm me .

-=>Raja.

rbort...

For the 1005 and the spectra you really want to get the bellcrank upgrade kit, it fixes the issue with the stud and prevents a mishap.

/
/

Raja, good to see you on RR.

I think I have this upgrade kit... I am going to post some Pic because this upgrade look very weak to me.

/

Look here

http://www.miniatureaircraft.de/sho...ategory&path=67

Part numbers 2900-01 and 2900-02.

Not weak at all, fixes the issue compared to the stock part. Had this done about 3 years ago.

-=>Raja.

I live between Bakersfield, Missouri and San Francisco, CA.

Cool

Fly with us on a weekendhere in fresno then

I wish I could!

rbort...

Not weak at all, fixes the issue compared to the stock part. Had this done about 3 years ago.

/
/

Ok... I have this part... 120-90

When a I went to install this, I found some weakness...

In the Pic, you can see diameter of threads of ball link.

I was trying to pull out this plastic from my spectraG and use this XL-pro metal stuff.

I found that the upper ball link was 3 mm thread diameter but, the lower is 1.5 mm... Don't get it.

What is your opinion about it?

My spectraG is waiting for this XL-pro beauty...

/

There isn't that much force on it to rip any ball out even with 1.5mm diameter, also don't forget that is in metal its stronger than in plastic. In plastic will be stronger with bigger diameter threads than smaller.

You can use the metal ones if you like with no worries. You should upgrade the stud kit if you have not already, the new one is much more robust. Hit me up if you need that upgrade, I have 3 from Judith here she left with me at IRCHA to sell for her to whomever needs them.

-=>Raja.

/
/

Thank you!

I was worry about it but you are right. Threads diameter in ball links at servo horn have same dimension.

/