RunRyder RC
WATCH
 1 page 222 views POST REPLY
HomeScale✈️AircraftScale HeliScale Helicopter Main Discussion › Looking for TFmodel EC145 manual
09-21-2018 01:46 PM  9 months ago
Topic Vote0Post 1
klauss

rrNovice

Austria

MyPosts All Forum Topic
Looking for TFmodel EC145 manual
Hi
I got an EC145 fuselage for a t-Rex500. Searching the internet,
it seems to be manufactured by TFmodel or Smartmodel. As there are some parts missing (woodwork), I am looking for a manual or plan.
Would be great if I could get a copy or scan from such a plan.
Regards
KLaus

SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-21-2018 02:17 PM  9 months ago
KJH

rrVeteran

Interlochen, MI

MyPosts All Forum Topic
Klaus,
That looks bigger than 500 size. I found these, but neither of them look quite like the one in your picture.

https://cdn.shopify.com/s/files/1/1...EC145manual.pdf

http://www.scaleflying.de/images/pd...%20600%20EN.pdf
-Kevin
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-21-2018 02:37 PM  9 months ago
klauss

rrNovice

Austria

MyPosts All Forum Topic
HI
Thanks KJH. I know, I was also thinking about a TREX600, but then I found
this repost: https://www.rc-heli.de/board/showth...light=EC145+500
Which describes a 500 fuselage and it looks the same than mine.
I just measured the distance from main to tail rotor and it seems that you are right. Its almost the same distance than the TRex600.
So I have to correct the search from 500 to a 600 fuselage manual!
Thanks !!

Regards
Klaus
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-21-2018 02:58 PM  9 months ago
KJH

rrVeteran

Interlochen, MI

MyPosts All Forum Topic
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-23-2018 07:52 AM  9 months ago
klauss

rrNovice

Austria

MyPosts All Forum Topic
Hello Kevin
Great! Thanks a lot!
Now I only need a copy of the woodwork sheets as I am missing some parts.
Regards
KLaus
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-06-2018 02:34 PM  7 months ago
eiichivr

rrNovice

tamano.okayama,japan

MyPosts All Forum Topic
I also got the same one. It is a used article in the process of production. Veneer's up tail parts were crushed. The shaft driven REX 500 is incorporated. Tail control. The pitch control by wire is very severe.

Watch at YouTube

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 222 views POST REPLY
HomeScale✈️AircraftScale HeliScale Helicopter Main Discussion › Looking for TFmodel EC145 manual
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Wednesday, July 17 - 2:25 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online