RunRyder RC
WATCH
 1 page 164 views POST REPLY
HomeAircraftHelicopterAlignOther › Trex 600 fuel line grommet
09-18-2018 10:59 AM  31 days agoPost 1
datidun

rrElite Veteran

N Ireland

My Posts: All  Forum  Topic

Very hard to find in the UK,anybody know who sells the fuel LINE grommet that goes in the frame,its the one were the tubing goes through to the Muffler,I believe the Trex 600 and 700 are the same.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-18-2018 01:40 PM  31 days agoPost 2
JuanRodriguez

rrProfessor

The Villages, Florida

My Posts: All  Forum  Topic

Check with your local hardware store and auto parts store... they usually have a large selection of grommets and you may be able to find something close enough to make it work....

You may need to modify the hole in the frame to size it to the grommet.....

Been there, done that and old enough to know better.....

PM  EMAIL  GALLERY  Attn:RR  Quote
09-19-2018 12:26 AM  31 days agoPost 3
Johnhuck

rrApprentice

Discovery Bay Ca

My Posts: All  Forum  Topic

http://grandrc.com/Nitro-Helis-&-Pa...9_81/index.html

AMA 355827 Trex600 pro.FBL 3x9452 cycle 9254 throttle.SK540 BLS 251tail OS55 Pb pipe 9303 2.4

PM  EMAIL  GALLERY  Attn:RR  Quote
09-20-2018 11:46 AM  29 days agoPost 4
datidun

rrElite Veteran

N Ireland

My Posts: All  Forum  Topic

Is just me I cant find the part and number.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-20-2018 12:04 PM  29 days agoPost 5
chopper37

rrVeteran

NJ and Long Island

My Posts: All  Forum  Topic

It actual comes with the side frames here is the size tho
Fuel line grommet x 1(Φ5.2xΦ7xΦ11x4.8mm)

http://shop.align.com.tw/product_in...roducts_id=1832

PM  EMAIL  GALLERY  Attn:RR  Quote
09-20-2018 01:49 PM  29 days agoPost 6
JuanRodriguez

rrProfessor

The Villages, Florida

My Posts: All  Forum  Topic

chopper37
I would look at a Local hardware store
Yup, already suggested that on post # 2

Been there, done that and old enough to know better.....

PM  EMAIL  GALLERY  Attn:RR  Quote
09-20-2018 06:30 PM  29 days agoPost 7
datidun

rrElite Veteran

N Ireland

My Posts: All  Forum  Topic

I still cant find anything yet at the stores, but I have an idea, which is to use a small round file to file off the sharp edges of the hole heading to the Muffler side and double up some tubing over the original tubing to protect it were it goes through the grommet hole, wonder if it would do the job.

PM  EMAIL  GALLERY  Attn:RR  Quote
09-28-2018 01:06 PM  21 days agoPost 8
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

You could add some heat shrink tubing to the line.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
09-28-2018 01:50 PM  21 days agoPost 9
JuanRodriguez

rrProfessor

The Villages, Florida

My Posts: All  Forum  Topic

datidun
I still cant find anything yet at the stores, but I have an idea, which is to use a small round file to file off the sharp edges of the hole heading to the Muffler side and double up some tubing over the original tubing to protect it were it goes through the grommet hole, wonder if it would do the job.
Not a bad idea but he sure to use larger ID. Fuel tubing so as to not “pinch” the pressure line .....

Been there, done that and old enough to know better.....

PM  EMAIL  GALLERY  Attn:RR  Quote
10-13-2018 07:18 PM  6 days agoPost 10
ssrobzoom

rrKey Veteran

Tn

My Posts: All  Forum  Topic

Just drill it out to fit a current size. I have inquire too and Align only sell it with the frame which I think is terrible.

PM  EMAIL  GALLERY  Attn:RR  Quote
10-14-2018 05:02 PM  5 days agoPost 11
JLF92677

rrApprentice

Southern California

My Posts: All  Forum  Topic

Use nylon braid sleeve to protect the fuel tubing. It works for me.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 164 views POST REPLY
HomeAircraftHelicopterAlignOther › Trex 600 fuel line grommet
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Saturday, October 20 - 10:20 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online