RunRyder RC
WATCH
 1 page 226 views POST REPLY
HomeAircraftHelicopterHelicopter Main Discussion › Vbar Neo nitro setup help needed
08-30-2018 12:24 PM  77 days agoPost 1
lajwab

rrApprentice

Chicago, ILL

My Posts: All  Forum  Topic

Hi guys,

I do fly eclectic as most people now but I do like Nitro as well. So I am setting up my Trex700N DFC with a VBAR NEO FBL ona Futaba 16SZ radio via S-BUS. I have little experience with my Vbar Silverline but now I am getting anywhere.

First can someone guide me where to plug in the Throttle servo. ?
I tried plug it in ESC and AUX2 ports but no luck.
Also, I like to ask what settings i should do in the radio before setting up anything.
I am going to use Spektrum back plate sensor using Vbar internal governor.

Any help will be highly appreciated.

Thanks,

Arshad

PM  EMAIL  GALLERY  Attn:RR  Quote
08-30-2018 05:32 PM  77 days agoPost 2
Jeff polisena

rrElite Veteran

westpalmbeachflorida usa

My Posts: All  Forum  Topic

ESC port . You need nitro gov app download . Go to gov expert to col add and change to - 50 and see if servo works .

I stole it ,flew it and gave it back ;)

PM  EMAIL  GALLERY  Attn:RR  Quote
08-30-2018 05:34 PM  77 days agoPost 3
Jeff polisena

rrElite Veteran

westpalmbeachflorida usa

My Posts: All  Forum  Topic

https://www.vstabi.info/en/node/1949.

I stole it ,flew it and gave it back ;)

PM  EMAIL  GALLERY  Attn:RR  Quote
08-30-2018 08:34 PM  77 days agoPost 4
Andy from Sandy

rrElite Veteran

Bedfordshire, UK

My Posts: All  Forum  Topic

I think you need to get the pro upgrade for the nitro governor. Have you purchased that upgrade or the Pro + Rescue upgrade?
You need nitro gov app download
Apps are a function of the VBar Control transmitter. Apps are not needed for Futaba.

Have you got the VStabi NEO software loaded on your PC? Can you connect NEO and see what is available in setup?

In VStabi NEO software configure NEO for S-Bus.

Default new model settings in your TX. In VStabi NEO software do the tx setup and reverse channels as needed - you would of done this before I imagine when you setup the silverline.

Follow along with the setup...

PM  EMAIL  GALLERY  Attn:RR  Quote
08-31-2018 07:10 AM  76 days agoPost 5
lajwab

rrApprentice

Chicago, ILL

My Posts: All  Forum  Topic

Hi,
Many thanks for your input.
Yes, I have upgraded Neo to pro + Rescue. Vbar software is loaded and connected. On the second screen where we select or assign channels via S-Bus, I cannot get my throttle to work. If I insert in ESC port, the throttle servo moves but not lanier way. It jumps.

PM  EMAIL  GALLERY  Attn:RR  Quote
08-31-2018 07:49 AM  76 days agoPost 6
Andy from Sandy

rrElite Veteran

Bedfordshire, UK

My Posts: All  Forum  Topic

Until you have completed the tx calibration screen plugging in servos is pointless.

At the tx calibration screen you have not setup yet to use the nitro governor.

At the tx calibration screen it is the same for NEO as it is for silverline to get the throttle channel from your tx to show up and moving in the correct direction.

In your tx servo monitor screen can you see the throttle channel output?

PM  EMAIL  GALLERY  Attn:RR  Quote
08-31-2018 02:56 PM  76 days agoPost 7
Jeff polisena

rrElite Veteran

westpalmbeachflorida usa

My Posts: All  Forum  Topic

I mentioned Coll.add setting because that was my issue on servo not responding .Pos 1 is +50 ,hold +30 , 2 -28, 3 -29 . I was wrong on my setting, it was at - 50 and did not respond and I had to put at + 50 to work correctly . Also I had issue with sensor too close to back plate and Neo not getting correct reading . Sensor was picking up rod pin and crank . I put washer under sensor mounts for spacing and problem solved .

I stole it ,flew it and gave it back ;)

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 226 views POST REPLY
HomeAircraftHelicopterHelicopter Main Discussion › Vbar Neo nitro setup help needed
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, November 15 - 11:27 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online