RunRyder RC
WATCH
 1 page 192 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Spektrum DSM › Dx7 w/ AR8000 help.
06-21-2018 03:34 AM  15 months ago
Topic Vote0Post 1
Mattyg36

rrNovice

Elizabeth, co

MyPosts All Forum Topic
Dx7 w/ AR8000 help.
So I have a question as my 600 align left me completly stumped this evening when I went to fly. Fueled up and flipped the receiver on then the radio. And absolutely nothing, have power from the regulator to the receiver as the lights on the AR8000 come on.

Rebound the RX to the TX and still nothing. Now I've always run the power from the align regulator into the RX via the bind/data port without problems for about 6-8 months. Could this have cooked the Rx? Could I have a bad regulator? Any help and or suggestions are greatly appreciated. Thanks!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-21-2018 11:09 AM  15 months ago
Rojoalfa

rrVeteran

Punta de Mata, Monagas-Venezuela

MyPosts All Forum Topic
/
/

IMO... Check satellites and swap it if you can...

The binding process are doing between TX and satellites... So first thing to do is check cables, antennas, led and connectors... Blinking leds always mean bad news...

Also, check Dsm2, DsmX specifications on satellites according to dx7.

Voltage... Yes... Check your regulator.

Spektrum have this issue... For no particular reason, you get out of binding from time to time...

/
Saludos cordiales,
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 192 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Spektrum DSM › Dx7 w/ AR8000 help.
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, September 21 - 2:11 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online