RunRyder RC
WATCH
 1 page 247 views POST REPLY
Home✈️Aircraft🚁Helicoptere-XLPower XL520 XL550 XL700 › Xl motor 4025 timing
06-20-2018 06:47 PM  15 months ago
Topic Vote0Post 1
Daved Gutierrez

rrVeteran

Chicago, IL

MyPosts All Forum Topic
Xl motor 4025 timing
Hi guys what timing are you using with the 4025 motor that comes in the combo with the xlpower 550 and hobbywing esc? I'm looking forward to maiden my 550 this weekend and I couldn't find anything about this motor settings for said esc.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-11-2018 04:30 PM  14 months ago
Robert Sinsky

rrNovice

Aberdeen Maryland

MyPosts All Forum Topic
Timing
Leave it on auto
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-11-2018 07:45 PM  14 months ago
Daved Gutierrez

rrVeteran

Chicago, IL

MyPosts All Forum Topic
Ok I will give that a try.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-15-2018 04:40 PM  14 months ago
Robert Sinsky

rrNovice

Aberdeen Maryland

MyPosts All Forum Topic
Timing
How did it work out Dave ?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-15-2018 06:23 PM  14 months ago
Daved Gutierrez

rrVeteran

Chicago, IL

MyPosts All Forum Topic
I'm using a Hobbywing 120a V4 there's no option to change it to auto. Frequency is set to 32hrz and cannot be change. It's running hot so I'm going to buy a motor first and test again if that doesn't help I will get a new esc as well. Thanks for checking back.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-15-2018 07:12 PM  14 months ago
linemen120

rrNovice

galloway, nj usa

MyPosts All Forum Topic
theres nothing wrong with your temps.. some motors run hot. 160deg is normal..you need more airflow over the esc or cooling fans.
im using a 100a on mine and only pull 60a. no fan either, esc is touchable.
motor is hot but didn't check with a temp gun.
too many to list
SHARE  PM  EMAIL  Attn:RR  Quote
07-16-2018 03:10 AM  14 months ago
Daved Gutierrez

rrVeteran

Chicago, IL

MyPosts All Forum Topic
I'm not worried about the motor is the ESc that I feel runs too hot.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-23-2018 03:59 AM  14 months ago
Robert Sinsky

rrNovice

Aberdeen Maryland

MyPosts All Forum Topic
ESC
Hey Dave I'm using a CC 120 HV with the factory motor and with 22.2 Volt in the setup. At all 3 head speeds 2000 to 2300 my ESC only gets warm. I bought the ESC used for 110.00 and I'm extremely happy with that setup.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-28-2018 05:11 AM  13 months ago
Daved Gutierrez

rrVeteran

Chicago, IL

MyPosts All Forum Topic
I was going through the set up again and realized that i did not set the low and high under the Ikon governor settings and it says that it is necessary whether you plan to use the gov or not, i will fly it Sunday maybe that will have some positive effect on it.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 247 views POST REPLY
Home✈️Aircraft🚁Helicoptere-XLPower XL520 XL550 XL700 › Xl motor 4025 timing
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, September 16 - 11:25 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online