RunRyder RC
WATCH
 1 page 510 views POST REPLY
05-04-2018 03:04 AM  4 months agoPost 1
Blue Angel

rrApprentice

Redford, Mi - USA

My Posts: All  Forum  Topic

I need some servo recommendations for the TR on my 60 nitro heli with a 6.0V battery and a 401 gyro. Do not want Futaba 9254 due to having to reduce the voltage. Looking for high speed (.06- .08sec/60degrees)
and moderate cost. Thanks!

Blue Angel

PM  EMAIL  Attn:RR  Quote
05-04-2018 09:50 AM  4 months agoPost 2
wjvail

rrKey Veteran

Meridian, Mississippi

My Posts: All  Forum  Topic

I don't own the below servo so I can't recommend them based on experience; however, others seem to love them and they seem to meet your requirement for "reasonable cost". You will have to confirm the 401 will function with a 760us servo.
Blue Angel
Do not want Futaba 9254 due to having to reduce the voltage.
Isn't the 401 rated at 6.0 volts? Aren't you already looking at having to run a regulator for the gyro? Won't the gyro restrict you from running an unregulated LiPo/LiIon set up? Given the voltage restriction of the gyro, you could just run the 9254.

http://www.promodeler.com/DS120BLHV

"Well, Nothing bad can happen now."

PM  EMAIL  GALLERY  Attn:RR  Quote
05-04-2018 03:31 PM  4 months agoPost 3
Blue Angel

rrApprentice

Redford, Mi - USA

My Posts: All  Forum  Topic

The 401 gyro is rated for 6.0 volts and I am using a 5 cell (NiMH) pack which is 6.0 v. The Futaba 9254 is rated for 4.8 v which would need a resistor added. Thanks for your input. More suggestions are welcomed.

Blue angel

PM  EMAIL  Attn:RR  Quote
05-04-2018 03:41 PM  4 months agoPost 4
KJH

rrVeteran

Interlochen, MI

My Posts: All  Forum  Topic

You'd want a diode or two, not a resistor. I've had good luck using home-built voltage step downs with diodes with S9253/54 servos and other servos rated for 4.8V. I'm using Life 2s packs.

-Kevin

PM  EMAIL  GALLERY  Attn:RR  Quote
05-04-2018 03:54 PM  4 months agoPost 5
nappyroots2182

rrElite Veteran

Moline, il

My Posts: All  Forum  Topic

Kst 525 is my choice for a tail servo. It's been great in a few birds. Otherwise promodeler is great too

PM  EMAIL  GALLERY  Attn:RR  Quote
05-04-2018 08:44 PM  4 months agoPost 6
Blue Angel

rrApprentice

Redford, Mi - USA

My Posts: All  Forum  Topic

Checked out the specs. on the KST 525. Sounds like a heck of a servo for the money. I have located one on Ebay, otherwise not easy to find. Many hobby shops do not even carry KST. Where do you get yours? Thanks!

Blue Angel

PM  EMAIL  Attn:RR  Quote
05-04-2018 09:15 PM  4 months agoPost 7
nappyroots2182

rrElite Veteran

Moline, il

My Posts: All  Forum  Topic

I've got some from eBay, amain,buddyrc. Me and a buddy feel they are the best bang for buck servo we have used

PM  EMAIL  GALLERY  Attn:RR  Quote
05-04-2018 09:33 PM  4 months agoPost 8
Jim-bob

rrApprentice

Little Hocking OH USA

My Posts: All  Forum  Topic

I'm running the above mentioned Pro-Modeler servo in one of my heli's. Good solid servo for the money and you get awesome customer support from John.

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2018 03:51 PM  4 months agoPost 9
Blue Angel

rrApprentice

Redford, Mi - USA

My Posts: All  Forum  Topic

nappyroots2182: Do you use KST servos on collective, cyclic, and throttle? If yes, which models (servo #)? Thanks!

Blue Angel

PM  EMAIL  Attn:RR  Quote
05-05-2018 03:53 PM  4 months agoPost 10
Blue Angel

rrApprentice

Redford, Mi - USA

My Posts: All  Forum  Topic

Jim-bob: And who/where is John? Thanks!

Blue Angel

PM  EMAIL  Attn:RR  Quote
05-05-2018 08:14 PM  4 months agoPost 11
nappyroots2182

rrElite Veteran

Moline, il

My Posts: All  Forum  Topic

We are flying goblin 500s. 589 on collective, 525 on tail. Using 725s on a plank. Been really good

PM  EMAIL  GALLERY  Attn:RR  Quote
05-05-2018 10:02 PM  4 months agoPost 12
KJH

rrVeteran

Interlochen, MI

My Posts: All  Forum  Topic

Blue Angel
And who/where is John? Thanks!
John Beech is the owner of ProModeler. They're located in Sanford, Florida.

-Kevin

PM  EMAIL  GALLERY  Attn:RR  Quote
05-07-2018 05:50 PM  4 months agoPost 13
Blue Angel

rrApprentice

Redford, Mi - USA

My Posts: All  Forum  Topic

Thanks KJH. I'll look him up.

Blue Angel

PM  EMAIL  Attn:RR  Quote
05-09-2018 01:39 PM  4 months agoPost 14
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

Align DS655 is rated at 6.0v and is very fast. HOWEVER, I would always advise stepping down even a 6v rated servo when it is on the tail and none regulated (5 cell Ni-Mh can be around 7v fully charged) especially if it is a nitro or gasser. If you absolutely have to run 6v then look at a HV tail servo.

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 510 views POST REPLY
 Print TOPIC  Make Suggestion 

 7  Topic Subscribe

Wednesday, September 26 - 12:24 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online