RunRyder RC
WATCH
 1 page 135 views POST REPLY
HomeAircraftHelicopter
e-
Castle Electric Components
› Talon 90 vs Spartan VX1E
04-24-2018 11:40 PM  3 months agoPost 1
fastrc1

rrKey Veteran

Planet Brooklyn, NY-USA

My Posts: All  Forum  Topic

Why can't I get the Talon 90 to recognize High n Low stick position even though i've followed the endpoint adjustments to the letter. Used both Futaba n Spektrum radios with no success. With the Futaba I used the throttle channel on the rx and everything worked well. It recognized and armed and started the motor. When I went into the throttle port on the Spartan It did absolutely nothing. Using the Spektrum DX6 with SV5 on the Spartan it also does absolutely nothing except recognize the high stick position. Low stick is firing off all types of tones and what not.

RIP Roman Pirozek Jr.
Team Futaba USA
Team Kontronik USA
http://flysrw.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-26-2018 05:05 PM  3 months agoPost 2
fastrc1

rrKey Veteran

Planet Brooklyn, NY-USA

My Posts: All  Forum  Topic

Bueller Bueller Bueller?

RIP Roman Pirozek Jr.
Team Futaba USA
Team Kontronik USA
http://flysrw.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-26-2018 10:08 PM  3 months agoPost 3
pctomlin

rrVeteran

Texas

My Posts: All  Forum  Topic

You need to think of this as a two step process. You have the transmitter to FBL unit setup to get the FBL controller to see 0% and 100% throttle from the transmitter and then set up the FBL unit output to the esc. Some people go into the data pod and set FBL output to 60/60, set transmitter to FBL unit and then complete the FBL to esc from the 60/60 settings with the data pod.

PM  EMAIL  GALLERY  Attn:RR  Quote
04-26-2018 10:20 PM  3 months agoPost 4
fastrc1

rrKey Veteran

Planet Brooklyn, NY-USA

My Posts: All  Forum  Topic

Hmmm PITA. Just read a few things involving allowing the Vortex to power on first via direct V or through a BEC and then powering the ESC w/o BEC output @ full throttle and then going through the motions. Lemme see

RIP Roman Pirozek Jr.
Team Futaba USA
Team Kontronik USA
http://flysrw.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-26-2018 11:40 PM  3 months agoPost 5
fastrc1

rrKey Veteran

Planet Brooklyn, NY-USA

My Posts: All  Forum  Topic

No dice.

RIP Roman Pirozek Jr.
Team Futaba USA
Team Kontronik USA
http://flysrw.com

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-27-2018 03:29 PM  3 months agoPost 6
pctomlin

rrVeteran

Texas

My Posts: All  Forum  Topic

Are you using Castle governor or the Spartan governor? If using SV5 on the VX what is the setting for Gov?

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 135 views POST REPLY
HomeAircraftHelicopter
e-
Castle Electric Components
› Talon 90 vs Spartan VX1E
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Wednesday, August 15 - 2:17 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online