Need to know mixture for a gasser engine

BradyMaynard

Average is 32 to 1.
Verify via engine manual.

~~Enjoying the hobby one flight at a time~~

I ran my gassers as well as 2 cycle lawn equipment at 60:1 using Amsoil 100% synthetic.....

Been there, done that and old enough to know better.....

if you are referring to gas and oil mix I would go by what the manufacture of your engine recommends. Im using a toxic Zenoah @ 32 to 1.
If by "mixture" you mean needle settings ,depend on the carb you are using.

I have rotorstar or t10/ motor

BradyMaynard

25 or 6 to 4...

4:1 or 7:3, depending on what manual you read.

https://www.rcgroups.com/forums/sho...54&d=1408040448

http://www.go-engine.com/download.asp

-Kevin