RunRyder RC
WATCH
 1 page 712 views POST REPLY
02-09-2018 02:14 PM  17 months ago
Topic Vote0Post 1
Raptor xp

rrNovice

New Bloomfield, Mo

MyPosts All Forum Topic
Ikon2 and BK servos
I’m getting ready to buy the electronics for a new goblin black nitro and was wondering if anyone has run into issues with Ikon2 hd and 7000 series BK servos. Thanks
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2018 04:29 PM  17 months ago
Flyin for Jesus

rrVeteran

Troy, IL. 62294

MyPosts All Forum Topic
No personal experience, but perhaps no news is good news???
I've never heard that combination being a problem.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2018 04:54 PM  17 months ago
rcflyerheli

rrKey Veteran

Granbury, TX USA

MyPosts All Forum Topic
Not to hijack the thread, but a couple years ago (or so), I did a lot of testing with the BK servos on all series Vbar units that were available at the time (Neo wasn't available). I found I could shut all the Vbars down with only one servo (7001). As a comparison, I compared that result with an Ikon1. Putting all the servos into the Ikon did not cause it to shut down like the Vbars.

Hope this helps.
Logo 700, Specter 700, Goblin 700, Trex 700DFC, Gaui X7, Logo 690SX, Logo 600SX; Trex 470 Trex 500
Amain Team Rep
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-09-2018 06:19 PM  17 months ago
Raptor xp

rrNovice

New Bloomfield, Mo

MyPosts All Forum Topic
The reason i even bring it up is I watched a video with Bert in it and he made mention of it. He did not specify if it was version 1 or 2
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2018 12:55 AM  17 months ago
Eury

rrProfessor

Dover NH

MyPosts All Forum Topic
I’ve got BK7001s with an Ikon2 on my N5c. Nothing weird to report, they work fine.Nick Crego

Citizen #0168
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2018 01:23 AM  17 months ago
ticedoff8

rrKey Veteran

Morgan Hill, CA. USA

MyPosts All Forum Topic
Raptor xp
I’m getting ready to buy the electronics for a new goblin black nitro and was wondering if anyone has run into issues with Ikon2 hd and 7000 series BK servos. Thanks
In an early version of the 2.0.??? code for the iKON and Brain, there was a problem with the BK Servo DS-7002HV.
All other BK Servo servos were fine. It was weird, because we were flying the BK Servo DS-7001HV with no problems
Working with BK Servo tech guys, MSH SW Dev made some changes in the MSH code and corrected the issue in their next release

The latest release of MSH code is 3.1.027 (corrected). So this issue was a long time ago.

I currently use these BK Servo servos:
2 - DS-7005HV (tail) (T600E / T600N)
3 - BLS-8002HV (swash) (T600E)
1 - DS-5005HV (tail) (G380)
3 - DS-3001HV swash (G380)

These are all on Brain 2.

The recommendation from MSH is to run the refresh rate NO HIGHER than 200Hz for the DS-700X swash servos.
But, you can run the DS-7006HV at the full rated 760us/333hz

BTW: I run the Align BLS-815H and BLS-855H on my Goblin 700 Black Nitro with an Align DS535M Full Metal HV for throttle.
Brain 2 HV/BT and I use 200Hz refresh on all of them
Believe 1/2 of what you see and none of what you hear.
Fake News will be the downfall of our Republic!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2018 01:55 AM  17 months ago
Dawiev

rrApprentice

Middle East

MyPosts All Forum Topic
4 airfrsames - 550x, Rush 750, CHP 600n, Goblin gasser. No problem.

Ps. Latest code is 3.1.027 I believe.
SHARE  PM  EMAIL  Attn:RR  Quote
02-10-2018 02:06 AM  17 months ago
Raptor xp

rrNovice

New Bloomfield, Mo

MyPosts All Forum Topic
Thank you guys. It makes sense. I really wanted to try the Bk servos so I over researched them. I like the ikon to much to learn a different one.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-13-2018 01:31 PM  17 months ago
old nitroman

rrVeteran

Naples florida

MyPosts All Forum Topic
I run the ikon in 14 helis most of them run the bk servo line, all with no problems, just make you set them up right. On servo page find servo and click it. that's how easyE5s and E7se,and a 766, Roban bell 222 800 superscale,450 bell 4 bladed head,gobby 380and 420 ,180cfx
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 712 views POST REPLY
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Sunday, July 21 - 6:07 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online