RunRyder RC
WATCH
 1 page 586 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsbavarianDEMON › Problem setting up BD 3SX
02-07-2018 05:50 AM  17 months ago
Topic Vote0Post 1
JR Guy

rrApprentice

Waikawa Beach New Zealand

MyPosts All Forum Topic
Problem setting up BD 3SX
Can you please put me in the picture when setting up the BD 3sx?
I have set up a compass Pod and Boom to test before fitting into a large scale Vario.
From the start I found it easy to set up using the wizard.
On the mixer page I had the collective travel and the Aileron/Elevator set at + - 9 Degrees with centre stick at 0 Now is when the problem starts.
To get 5 degrees at centre stick I used the Collective offset set to 80 gave me the 5 degrees Centre 13 top and 3 bottom Basically scale setting.
However when I checked the Elevator and aileron I had +6 minus 12.
So my understanding is that the Collective offset did not effect the other settings. Whats wrong?? Cheers Colin
JR Guy
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2018 12:07 PM  17 months ago
Phoenix NOTAR

rrApprentice

Tallahassee, Florida USA

MyPosts All Forum Topic
I suggest for scale models thay you mechanically set hover pitch using the rods from the swash to the grips and / or the servos to the swash, when the servo arms are at the mid position (square to the rods) and mid stick. Same as when they were at “0” for the pod and boom. Put the collective offset back to zero, and you should be all set.

Sandy
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2018 01:46 PM  17 months ago
doorman

rrProfessor

Sherwood, Arkansas

MyPosts All Forum Topic
5 At Center
I use the same method Sandy described and there is no problem. ..

Stan
AMA 2918-Team Spin Blades,,Castle Creations, Unique Aircraft
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2018 02:16 PM  17 months ago
CoachE

rrApprentice

Cincinnati, ohio -usa

MyPosts All Forum Topic
I use the same as Sandy and Stan.BD Team Pilot / Get !T - Got !T - Perfect !T
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-07-2018 06:21 PM  17 months ago
JR Guy

rrApprentice

Waikawa Beach New Zealand

MyPosts All Forum Topic
Cheers Guys I will give it a go. ColinJR Guy
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2018 03:33 PM  15 months ago
CoachE

rrApprentice

Cincinnati, ohio -usa

MyPosts All Forum Topic
Colin,

How did it go?
BD Team Pilot / Get !T - Got !T - Perfect !T
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2018 05:48 PM  15 months ago
A&J

rrApprentice

Hudson FL 34667

MyPosts All Forum Topic
Send a PM with information about support great guy hope it works for youLets do the time warp againnn !
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 586 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsbavarianDEMON › Problem setting up BD 3SX
 Print TOPIC  Make Suggestion 

 4  Topic Subscribe

Saturday, July 20 - 4:21 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online