RunRyder RC
WATCH
 1 page 1057 views POST REPLY
01-14-2018 06:42 AM  25 months ago
Topic Vote0Post 1
antja

rrVeteran

Levin new zealand

MyPosts All Forum Topic
phoenix
since upgrading my JR 11X to the latest software version 0002-0003 I can no longer get my Phoenix sim to work anyone else had this problem,or any suggestions to fix it.

Tony.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2018 01:00 PM  25 months ago
Heli_Splatter

rrElite Veteran

USA

MyPosts All Forum Topic
Check menus to look for buddy box settings. Enable the instructor or master/slave settings. You can usually select what channels of the master you want to allow control.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2018 08:12 PM  25 months ago
antja

rrVeteran

Levin new zealand

MyPosts All Forum Topic
cant even get the transmitter to calibrate so cant change any settings.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-14-2018 11:56 PM  25 months ago
Heli_Splatter

rrElite Veteran

USA

MyPosts All Forum Topic
I would say that the situation is far worse than your original description. I would e-mail/phone the company and find out what they recommend to do. You might have to send the radio back in. Sorry
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-15-2018 01:10 AM  25 months ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
💎Sustaining Member
Heli_Splatter You might have to send the radio back in. Sorry
Send the radio back in cause he can't get it to work with a simulator ? Seems kind of extreme, IMHO.....
Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-15-2018 06:31 AM  25 months ago
antja

rrVeteran

Levin new zealand

MyPosts All Forum Topic
sending the radio in is totally over the top.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-15-2018 12:29 PM  25 months ago
Heli_Splatter

rrElite Veteran

USA

MyPosts All Forum Topic
I said call/e-mail to find out their recommendations. If you cannot reach any of the settings, it is more problematical than can not use with Phoenix. I used to own one of these radios. Sounds like you bulloxed the upgrade. If that is the case you may have to send it in, but that is their call, not mine.

This is the same advice provided previously, based on comment the he could not get to settings.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-15-2018 01:38 PM  25 months ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
💎Sustaining Member
Heli_Splatter This is the same advice provided previously, based on comment the he could not get to settings.
I’m reading that as he can't get to the settings ON THE SIMULATOR, not the radio itself....... maybe he can clarify ?
Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-15-2018 02:58 PM  25 months ago
Heli_Splatter

rrElite Veteran

USA

MyPosts All Forum Topic
I read that to mean he cannot calibrate because no signal is available from the radio.

First thing he says is “since upgrading”... I don’t believe the radio is transmitting the code to the port. With newer radios, you have to turn the trainer port on in the radio and select what channels are to be used.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-15-2018 07:01 PM  25 months ago
antja

rrVeteran

Levin new zealand

MyPosts All Forum Topic
I have had this radio for about 6 years,it works perfectly well on all 3 of my large scale models and my pod and boom trainer, just will not work with Phoenix, and I did not Bollox the upgrade did three radios at the same time they are all working alright ,I have just loaded the the phoenix onto a new computer with windows 10 but when I try to set up the transmitter nothing works.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-15-2018 07:22 PM  25 months ago
Pistol Pete

rrProfessor

Seffner, FL

MyPosts All Forum Topic
💎Sustaining Member
how are you setting Tx (slave or master) and connecting radio to sim?

Id say check position of master/slave channel "rollers" (as they call it)

These are the switches that determines which radio is in control of the main 4 channels (T,R,A,E) in trainer menu.
~~Enjoying the hobby one flight at a time~~
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
01-15-2018 11:40 PM  25 months ago
Heli_Splatter

rrElite Veteran

USA

MyPosts All Forum Topic
I have been trying to say that.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-16-2018 12:45 AM  25 months ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
💎Sustaining Member
antja I have had this radio for about 6 years,it works perfectly well on all 3 of my large scale models and my pod and boom trainer, just will not work with Phoenix
Nuff said.....

Take a look at Pete's post.....hope you get it resolved.....
Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-16-2018 01:10 AM  25 months ago
antja

rrVeteran

Levin new zealand

MyPosts All Forum Topic
no you said I had bolloxed the upgrade without actually knowing what you were talking about.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-16-2018 01:18 AM  25 months ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
💎Sustaining Member
antja no you said I had bolloxed the upgrade without actually knowing what you were talking about.
I'm thinking that he felt that could have been a possibility (probably could be in some cases).....

Bottom line is that we're all trying to help resolve the issue and we sometime interpret the problem at hand in different ways.....
Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-16-2018 02:13 AM  25 months ago
antja

rrVeteran

Levin new zealand

MyPosts All Forum Topic
well said
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-16-2018 03:33 AM  25 months ago
Heli_Splatter

rrElite Veteran

USA

MyPosts All Forum Topic
Read my very first response. I had it right. I have owned that radio in the recent past. I thought that I could help. Usually when something goes wrong, the last thing you did is the obvious suspect.

Not a problem, I will not bother you further.

Ever
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1057 views POST REPLY
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, February 19 - 8:34 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online