RunRyder RC
WATCH
 1 page 318 views POST REPLY
HomeAircraftHelicopterHelicopter Main Discussion › Beast plus
01-07-2018 02:26 AM  11 months agoPost 1
joshmoha

rrApprentice

midland texas

My Posts: All  Forum  Topic

A while back I was having trouble getting the beast to initialize the lights would only scholl up and down on the higher side of the letters a guy help me today after u set red flashing for s-bus and then go menu b push red flashing for function assignment then exit

PM  EMAIL  GALLERY  Attn:RR  Quote
01-07-2018 04:07 PM  11 months agoPost 2
pH7

rrKey Veteran

Sterling Heights, MI - USA

My Posts: All  Forum  Topic

Your weren't in the setup menu. This quote from the manual describes how to get into the setup menu. It will not flash if you are in setup.
The programming of the MICROBEAST works in the following way: There are two menu levels. From ready mode (flight mode) you can always get into the one or the other menu level. A change between the menu levels is not possible; you always have to first get out of the current level to enter in the other menu level. Each level includes several setup points. The yellow LEDs next to the letters shows at which setup point you are currently. Note that the two menu levels have a different number of setup points.
To access the Setup menu you keep the button pressed (several seconds)until LEDA stops flashing and lights up continuously. In this menu all the basic settings are made to adjust the MICROBEAST to your helicopter.
• To access the Parameter menu, press and hold the button briefly until the LED A starts to flash quickly and immediately release the button. This menu is used to fine tune the flight characteristics and is mostly neededat the airfield.

Phil Heavin

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 318 views POST REPLY
HomeAircraftHelicopterHelicopter Main Discussion › Beast plus
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Saturday, December 15 - 12:28 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

The RC discussion world needs to consolidate. RR is now one choice for that. Its software is cutting edge. It hosts on-topic advertising. Help RR increase traffic buy making suggestions, posting in RR's new areas (sites) and by spreading the word.

The RunRyder Difference

• Category system to allow Rep/Vendor postings.
• Classifieds with sold (hidden) category.
• Classifieds with separate view new.
• Answer PMs offsite via email reply.
• Member gallery photos with advanced scripting.
• Gallery photo viewer integrated into postings.
• Highly refined search with advanced back end.
• Hosts its own high end fast response servers.
• Hosts thousands of HD event coverage videos.
• Rewrote entire code base with latest technology.
• No off-topic (annoying) click bait advertising.
Login Here
 New Subscriptions 
 Buddies Online