RunRyder RC
 6  Topic Subscribe
WATCH
 1 page 524 views POST REPLY
HomeAircraftHelicopterMain Discussion › frequency and pulse of align DS820M servo
12-12-2017 10:00 PM  6 months agoPost 1
torque

rrKey Veteran

bolivia , north carolina

My Posts: All  Forum  Topic

Like the heading says looking for the frequency and pulse of this
servo, I can't seem to find it on the internet. thanks.

PM  EMAIL  GALLERY  Attn:RR  Quote
12-12-2017 10:56 PM  6 months agoPost 2
EEngineer

rrProfessor

TX

My Posts: All  Forum  Topic

Call a distributor and ask them.....

It's pathetic that these specs aren't readily available....

Especially by Align themselves.

Logo 600SXs, 800XX, TDR IIs

PM  EMAIL  Attn:RR  Quote
12-12-2017 11:18 PM  6 months agoPost 3
ticedoff8

rrKey Veteran

Morgan Hill, CA. USA

My Posts: All  Forum  Topic

Most likely, it is the same as every other Align servo:
1520uS / 333Hz.

Believe 1/2 of what you see and none of what you hear.
Fake News will be the downfall of our Republic!

PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2017 07:13 AM  6 months agoPost 4
antja

rrVeteran

Levin new zealand

My Posts: All  Forum  Topic

readily available at Enterprise hobby 1520/333

PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2017 11:19 AM  6 months agoPost 5
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

Slightly off topic but why aren't we seeing narrow pulse cyclic servos yet?

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-13-2017 01:55 PM  6 months agoPost 6
dkshema

rrMaster

Cedar Rapids, IA

My Posts: All  Forum  Topic

Slightly off topic but why aren't we seeing narrow pulse cyclic servos yet?
I'll take a stab at that. No practical purpose, maybe?

-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz

PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2017 02:17 PM  6 months agoPost 7
torque

rrKey Veteran

bolivia , north carolina

My Posts: All  Forum  Topic

thank fellow fliers

PM  EMAIL  GALLERY  Attn:RR  Quote
12-13-2017 09:34 PM  6 months agoPost 8
EEngineer

rrProfessor

TX

My Posts: All  Forum  Topic

readily available at Enterprise hobby 1520/333
Good to know....but I searched for 15 minutes without finding that info....

Logo 600SXs, 800XX, TDR IIs

PM  EMAIL  Attn:RR  Quote
12-14-2017 11:40 AM  6 months agoPost 9
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

I'll take a stab at that. No practical purpose, maybe?
They work better on rudder so why not in FBL cyclics?

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-14-2017 01:01 PM  6 months agoPost 10
ICUR1-2

rrElite Veteran

Ottawa, Ontario

My Posts: All  Forum  Topic

Why aren't they narrow pulse.
Because it is not the standard.
Probably associated with expensive tail servos.
I don't know of any FBL unit where this is an option for cyclic.

spending time, paying attention

PM  EMAIL  GALLERY  Attn:RR  Quote
12-14-2017 02:32 PM  6 months agoPost 11
Richardmid1

rrProfessor

Leeds, England

My Posts: All  Forum  Topic

Because it is not the standard.
Yes but why? It's been what, 10 years since FBL systems came out?

60% of the time, it works every time!

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
12-14-2017 03:29 PM  6 months agoPost 12
RM3

rrElite Veteran

Killeen, Texas - USA

My Posts: All  Forum  Topic

more than likey they would have to change the programming within the FBL systems, which would simply be an update but some of the hardware likely differs inside as well?

but then there goes your market for all that "old" cyclic servos yet to be sold...

money is probably the biggest issue as to why.

showing a preference will only get you into trouble, 90% of everything is crap...

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 524 views POST REPLY
HomeAircraftHelicopterMain Discussion › frequency and pulse of align DS820M servo
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Wednesday, June 20 - 3:07 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online