RunRyder RC
WATCH
 1 page 393 views POST REPLY
11-11-2017 07:41 AM  20 months ago
Topic Vote0Post 1
3d-wanna-b

rrApprentice

Strawberry, Ar. U.S.A

MyPosts All Forum Topic
11X HELP
How can I fix this?? is it something I need to be worried or concerned about

Watch at YouTube

<<Beating the air into submission!!!>>
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-12-2017 02:57 AM  20 months ago
R/C Speed Nut

rrVeteran

Galesburg, Michigan USA

MyPosts All Forum Topic
This should not be a problem for you, but if it bothers you the sticks can be recalibrated to eliminate the problem.
You will have to search for how to access the service menu on the 11x to be able to recalibrate the sticks.

Mike

Funky Chicken?!!..........I thought this was how you do a piro flip!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-12-2017 03:33 AM  20 months ago
3d-wanna-b

rrApprentice

Strawberry, Ar. U.S.A

MyPosts All Forum Topic
Thanks for the reply Mike. So far I've searched and went through every thread I found with no luck, unless I just over looked it.<<Beating the air into submission!!!>>
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-12-2017 08:58 AM  20 months ago
Pistol Pete

rrProfessor

Seffner, FL

MyPosts All Forum Topic
Try
*Sub Trim
or
*Upgrade to version 2 (XG11) where it has stick calibration option in a menu...if not mistaken.
~~Enjoying the hobby one flight at a time~~
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-12-2017 09:44 AM  20 months ago
3d-wanna-b

rrApprentice

Strawberry, Ar. U.S.A

MyPosts All Forum Topic
Upgraded a while back but no change, I tried the calibration menu thats on the radio but didn't help. I'm pretty sure I'll have to do it through the service menu.<<Beating the air into submission!!!>>
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-13-2017 02:18 AM  20 months ago
Pistol Pete

rrProfessor

Seffner, FL

MyPosts All Forum Topic
In older radios its definitely a service menu feature. I was hoping that the calibration menu in the update was the latest and greatest access to it.

Like you, I just couldnt find how to access it. The most comprehensive tutorial on that radio is in flyinggiants.com and its not even there. I guess no one has figured it out yet.

Unless its the same as the 9x (doubtful), short of sending it in for such, you just might to have to accept it.

Given we are talking one or two numbers off from either extreme, Im confident that it is sending the proper signal pulse width as is. This can easily be confirmed with a servo. Since you have to give stick that little extra push to get zero or one hundred, observe that servo horn wont budge anymore when doing so.

Since FBL and ESC need calibration to throtle, it pretty much comes down to aesthetics versus function.

Sorry I cant help any further.
~~Enjoying the hobby one flight at a time~~
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
11-13-2017 04:48 PM  20 months ago
3d-wanna-b

rrApprentice

Strawberry, Ar. U.S.A

MyPosts All Forum Topic
I found out what the problem was.. after looking on the net I ran across an add for throttle limiter, well it showed a pic of the limiters and I knew right away i'd seen them somewhere and sure enough someone had put throttle limiter in the radio. Took them out and all works like its supposed to.. I still wanna know how to get into that service menu though...<<Beating the air into submission!!!>>
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 393 views POST REPLY
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Friday, July 19 - 3:15 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online