This CC Cortex is the Almost Ready to Fly package with the DJI a2 flight controller. This was professionally built by Carbon Core. I put two test flights on it before other hobbies distracted me and I put it on the shelf.
Includes everything you get in the ARTF package plus the a2 FC which was bought new for this copter.
Also included is a 1.3GHZ 200 mw video down-link transmitter that has been attached inside the frame but has not been hooked up. (You can remove it if you prefer to use something else)
Includes retractable landing gear.
I've gone ahead and listed it on ebay with No Reserve as I need to move it and don't have much time to negotiate right now.
*Picture with the gimbal mounted is not this Cortex.
800mm class multirotor (1200mm with propellers fitted overall diameter).
Folds to only 770 x 400 x 150mm - with 15/16″ propellers and 40-class motors.
Landing gear protects the propellers when folded.
Cortex carbon airframe weighs only 1110g, this includes servo-operated retractable landing gear.
Through-frame ESC cooling.
2.0 mm-thick carbon fiber frame plates.
Stainless steel flat-fitting torx bolts.
Fly with up to (3) 6S 10Ah lithium polymer batteries.
Flight batteries mounted on the top frame plate - most practical.
(8) CarbonCore motors.
(8) Specially selected high quality carbon fiber propellers.
(8) 30A 22.2V 400Hz multicopter ESC (electric speed controller).
Over-spec (and lightweight) 200A power distribution boards.
ESCs can only be calibrated to your transmitter, therefore the customer must calibrate the ESCs.