RunRyder RC
 2  Topic Subscribe
WATCH
 1 page 497 views POST REPLY
HomeAircraftHelicopterMain Discussion › Any electronics guru out there?
07-21-2017 08:18 PM  11 months agoPost 1
ssrobzoom

rrKey Veteran

Tn

My Posts: All  Forum  Topic

PM  EMAIL  Attn:RR  Quote
07-21-2017 08:23 PM  11 months agoPost 2
RM3

rrElite Veteran

Killeen, Texas - USA

My Posts: All  Forum  Topic

Does anyone know the hall effect sensor IC part number that's soldered on the end where the magnet passes by and used by most governors?
they vary on brand... but if you are looking for one that will work you need to know what kind of output (sink or source) your gov is expecting... ive used these "types" before for other projects:
https://www.sparkfun.com/datasheets...l-US1881EUA.pdf

showing a preference will only get you into trouble, 90% of everything is crap...

PM  EMAIL  Attn:RR  Quote
07-21-2017 08:28 PM  11 months agoPost 3
EEngineer

rrProfessor

TX

My Posts: All  Forum  Topic

DigiKey might be an alternate source also....

Logo 600SXs, 800XX, TDR IIs

PM  EMAIL  Attn:RR  Quote
07-21-2017 08:55 PM  11 months agoPost 4
Andy from Sandy

rrElite Veteran

Bedfordshire, UK

My Posts: All  Forum  Topic

As you are asking for a governor I wonder if you want to connect it to a governor?

http://www.aerospire.com/buynow.html

I have used Aerospire and had excellent service.

I did buy just the hall sensor many years ago but the time and effort to make the lead and add all the parts it cost me way more than $8 to make.

I can't remember the part number or where I got the part from.

PM  EMAIL  Attn:RR  Quote
07-21-2017 09:08 PM  11 months agoPost 5
ssrobzoom

rrKey Veteran

Tn

My Posts: All  Forum  Topic

Yes presently, I'm using a Multigov Pro and looking for a replacement hall effect sensor to replace a bad one I have. The current sensor is a u58707 and on another one I have a u58717 which I still cannot locate a replacement on Digikey or Mouser.

PM  EMAIL  Attn:RR  Quote
07-21-2017 09:51 PM  11 months agoPost 6
Andy from Sandy

rrElite Veteran

Bedfordshire, UK

My Posts: All  Forum  Topic

Is the company still operating and if so is there a problem ordering from them?

I am in the UK and I had good service from them some years ago now I must admit.

I know it is nice to DIY but this ensures you get the correct part and with support.

PM  EMAIL  Attn:RR  Quote
07-21-2017 10:18 PM  11 months agoPost 7
EEngineer

rrProfessor

TX

My Posts: All  Forum  Topic

It's probably been replaced by a newer type.....

Perhaps this might work....

https://www.adafruit.com/product/15...ASABEgKXVfD_BwE

Logo 600SXs, 800XX, TDR IIs

PM  EMAIL  Attn:RR  Quote
07-22-2017 02:47 AM  11 months agoPost 8
Skidsup

rrNovice

PA

My Posts: All  Forum  Topic

Sensor
If you are handy with a soldering tool you can make your own for a couple bucks. The part can be purchased from Mouser Electronics, part number785-SS443A, This is a honeywell sensor part #ss443a.

PM  EMAIL  Attn:RR  Quote
WATCH
 1 page 497 views POST REPLY
HomeAircraftHelicopterMain Discussion › Any electronics guru out there?
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, June 18 - 5:10 am - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online