RunRyder RC
WATCH
 1 page 342 views POST REPLY
Home✈️Aircraft🚁Helicoptere-AlignOther › 600 stretch ? info
06-07-2017 04:14 AM  27 months ago
Topic Vote0Post 1
motorhead540

rrApprentice

eaglecreek,oregon - USA

MyPosts All Forum Topic
600 stretch ? info
Hi all I am getting ready to do a stretch on my 600PRO . I have sourced most of the parts but need to come up with a little info so I can get the correct tap to rethread the inside of the torque tube after I cut it down . I plan on doing a 40mm stretch using 700 parts cut down for the 600 . trying to determine what size the internal threads for the drive spigots in the torque tube are that way I can get a tap and do a very good quality job on my stretch .
anyone know what size I might need ??? believe it will be metric lh but size ??
wife says if i'm going to be an addict at least its to a heli
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
06-13-2017 07:44 AM  27 months ago
Richardmid1

rrProfessor

Leeds, England

MyPosts All Forum Topic
Do you have access to a lathe? I would make the ends a press fit with some stud lock on AND drill it though with something like an m2 machine screw and nut.60% of the time, it works every time!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
06-14-2017 04:27 AM  27 months ago
Heli Fanatix

rrVeteran

Fountain Valley, CA

MyPosts All Forum Topic
Install the 700 boom on 600
- cut down 40mm
- use the gears from 600
- TT from 700
- custom make CF Rudder Control Rod
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 342 views POST REPLY
Home✈️Aircraft🚁Helicoptere-AlignOther › 600 stretch ? info
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Saturday, September 21 - 3:11 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online