RunRyder RC
WATCH
 1 page 676 views POST REPLY
Home✈️Aircraft🚁Helicoptere-BladeBlade 300 › Looking for suggestions for metal gear servos for a Blade 300 CFX
05-30-2017 11:24 PM  30 months ago
Topic Vote0Post 1
totally_awesome

rrApprentice

Fredericksburg, Virginia

MyPosts All Forum Topic
Looking for suggestions for metal gear servos for a Blade 300 CFX
Hello,

I want/need to replace the stock servos with metal gear servos and also get break away servo arms. So the next time I crash, the break away servo arms will break and the servos will be fine.
So some people suggest the Hitec 5055 ($18 each) others suggest the Hitec 5065 ($35).
So I am requesting "divine guidance" from people more experienced than me.
Regards, Dave
SHARE  PM  EMAIL  Attn:RR  Quote
08-07-2017 11:56 PM  28 months ago
totally_awesome

rrApprentice

Fredericksburg, Virginia

MyPosts All Forum Topic
Issue with arms for the hitec servos
Hello,

I got the Hitec 5065 metal gear servos. I am using the break way arms from buddy rc. The arms are to long, do i need to cutout the frame?
Regards, Dave
SHARE  PM  EMAIL  Attn:RR  Quote
08-08-2017 03:44 AM  28 months ago
learnedthehrdwy

rrNovice

Saginaw, MI

MyPosts All Forum Topic
Can you shim the servos to make the arms miss the frames? Been a while but I remember one of the balls that go in the arms faces the opposite way of the others. Don't know if that's causing the problem.

A picture would help. I swapped to H3050 servos on mine but that was in 2015 so the process is foggy at best lol
MSH P380/Lynx'd Mini Protos×3/Chase 360/Trex 450/180cfx/230s/SK540's,YGE,MKS,KST, Xnova,Scorpion,Switch,RJX/UMX Pitts/Valiant 1.3/RochobbyMX
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-09-2017 01:53 AM  28 months ago
totally_awesome

rrApprentice

Fredericksburg, Virginia

MyPosts All Forum Topic
Questions about the 5065 servos
Hello,

I could shim the servos, but I would have to do all three and them get them to line up with the swash plate. I might get the 5055 that I have be told are a drop in replacement.
Thanks for getting back to me.
Regards, Dave
SHARE  PM  EMAIL  Attn:RR  Quote
09-03-2017 01:48 PM  27 months ago
learnedthehrdwy

rrNovice

Saginaw, MI

MyPosts All Forum Topic
Spektrum H3050's are the only ones I know for a fact are a drop in replacement

Can even use the stock servo arms

Sorry for the delayed response
MSH P380/Lynx'd Mini Protos×3/Chase 360/Trex 450/180cfx/230s/SK540's,YGE,MKS,KST, Xnova,Scorpion,Switch,RJX/UMX Pitts/Valiant 1.3/RochobbyMX
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 676 views POST REPLY
Home✈️Aircraft🚁Helicoptere-BladeBlade 300 › Looking for suggestions for metal gear servos for a Blade 300 CFX
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, December 12 - 9:18 pm - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online