My Posts: All Forum Topic
problems persistI have the satellite mounted under the receiver as was pointed out to me. But now I can not get the thing to bind?
When I first got the dsmx satellite i was able to bind as normal. I was able to move the cyclic servos and such (although I will say that things did not seem quite right). But as i have stated earlier, I removed the satellite, thinking that i no longer needed it and could not then connect.
Once it was established that i did indeed need the receiver and I got it mounted, i now can not connect? I have tried going through the binding procedures as per the Align's binding procedure video and it blinks all of the right blinks but it does not ultimately connect.
A friend asked if it was reading low throttle (as sometimes you have to calibrate an esc when first setting it up so that it sees low throttle) but I have my throttle settings in normal 0,42,65,78 80. So that should be good.
Any help with this delimma will be appreciated. I am quite sure that it is something very simple that I am missing.
Did he crash? Dang, I missed it!