RunRyder RC
 3  Topic Subscribe
WATCH
 1 page 695 views POST REPLY
HomeAircraftHelicopter
e-
Blade
Blade 130 › 130s jr9503 stuck in safe mode??
05-26-2017 08:23 PM  13 months agoPost 1
piranhafreak

rrVeteran

Manahawkin NJ

My Posts: All  Forum  Topic

So I can't get out of safe mode I have no idea why? I have flight modes setup at stunt 80% and 100% throttle Idk I'm not sure what or how to change anything I use aux2 to get into trim etc and it also add less or more pitch but I can't get it to flip it just won't let me

Mabey one day i will actually land one of these things !!

PM  EMAIL  GALLERY  Attn:RR  Quote
05-28-2017 10:35 PM  12 months agoPost 2
piranhafreak

rrVeteran

Manahawkin NJ

My Posts: All  Forum  Topic

Well thanks to another post I found a way to do it and all I had to do is create a mix and now it's perfect and wow does this thing Handel well

Mabey one day i will actually land one of these things !!

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2017 03:50 AM  12 months agoPost 3
wrathofkhan

rrKey Veteran

LA, CA - US

My Posts: All  Forum  Topic

How well does it take crashes, aaaah ... i mean hard landings?

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2017 10:09 PM  12 months agoPost 4
Yak54

rrNovice

Canajoharie ny usa

My Posts: All  Forum  Topic

Actually it takes a hard landing well rather it on its head or skids,I hit hard last week with my 130s and never broke anythi g

PM  EMAIL  GALLERY  Attn:RR  Quote
06-07-2017 11:13 PM  12 months agoPost 5
cwright

rrKey Veteran

Blossvale New York

My Posts: All  Forum  Topic

It's a pretty tough little bird. The problems you were having with the JR is why I sold my 9303 and bought a,DX7 Gen 2 radio. It's great when your radio is in the instructions.

PM  EMAIL  GALLERY  Attn:RR  Quote
06-08-2017 05:39 AM  12 months agoPost 6
wrathofkhan

rrKey Veteran

LA, CA - US

My Posts: All  Forum  Topic

do the servos need cleaning? i had the older version of 130x, i remember having to clean the servos all the time since it is open and dust can get in relatively easily

PM  EMAIL  GALLERY  Attn:RR  Quote
06-08-2017 10:25 AM  12 months agoPost 7
cwright

rrKey Veteran

Blossvale New York

My Posts: All  Forum  Topic

Not so far. My son's 130X we didn't have much trouble with that. Only replaced a couple servos in it. Chuck.

PM  EMAIL  GALLERY  Attn:RR  Quote
03-23-2018 02:20 PM  3 months agoPost 8
raholek

rrVeteran

Zachary, Louisiana

My Posts: All  Forum  Topic

piranhafreak
Well thanks to another post I found a way to do it and all I had to do is create a mix and now it's perfect
Can you post the link. Just ordered one and I have a JR12x.

www.redstickrc.net ama#: 968515

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-24-2018 05:06 PM  3 months agoPost 9
pH7

rrKey Veteran

Sterling Heights, MI - USA

My Posts: All  Forum  Topic

It is possible that my post was able to help. Blade 230s with JR X9303 and other transmitters not in the manual. The programming for the 9303 and 9503 are the same. I don't know if the 130s is programmed the same as the 230s or not. If so, that may help.

Phil Heavin

PM  EMAIL  GALLERY  Attn:RR  Quote
03-24-2018 08:40 PM  3 months agoPost 10
raholek

rrVeteran

Zachary, Louisiana

My Posts: All  Forum  Topic

Thanks
That helps a lot. Thank you Phil.

www.redstickrc.net ama#: 968515

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-30-2018 11:32 PM  83 days agoPost 11
raholek

rrVeteran

Zachary, Louisiana

My Posts: All  Forum  Topic

JR 12x
Have it flying, but can't get a good elevator flip out of it. Can get up high and it will roll, but not like my BLADE CPX. Looking for an indication on the model that shows the modes. Safe, Agility and 3d.

www.redstickrc.net ama#: 968515

PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 695 views POST REPLY
HomeAircraftHelicopter
e-
Blade
Blade 130 › 130s jr9503 stuck in safe mode??
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, June 22 - 10:08 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online