RunRyder RC
WATCH
 1 page 998 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterEngines Plugs Mufflers Fuel › Bogging down post lift off.
03-26-2017 11:59 AM  3 years ago
Topic Vote0Post 1
dbldins

rrVeteran

Nicholasville,Ky.

MyPosts All Forum Topic
Bogging down post lift off.
I have two rap50 with OS50s. What would cause them to lift, hover a few seconds then slowly fall?
I wish I still flew!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-26-2017 01:16 PM  3 years ago
banshee rider

rrVeteran

Phoenix AZ.

MyPosts All Forum Topic
lean midrangeageing is manditory maturity is optional
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-26-2017 02:04 PM  3 years ago
dbldins

rrVeteran

Nicholasville,Ky.

MyPosts All Forum Topic
I basically need to richen low and lean the high to balance??I wish I still flew!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-26-2017 04:30 PM  3 years ago
banshee rider

rrVeteran

Phoenix AZ.

MyPosts All Forum Topic
Richen the low only
fly it see what the results are
only make 1 adjustment at a time

after that you may need to lean the high needle

my rule is always richen an engine if its not running right
you cant hurt an engine by making it richer you will only make it run worse if its already to rich but that wont cause damage to it
ageing is manditory maturity is optional
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-26-2017 04:34 PM  3 years ago
Four Stroker

rrElite Veteran

Atlanta

MyPosts All Forum Topic
What makes you think the high end is correct ? Richen both the low and high needles to richen the midrange. Check the tank plumbing and the muffler tap and fuel filters for clogging.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-29-2017 12:32 PM  3 years ago
dbldins

rrVeteran

Nicholasville,Ky.

MyPosts All Forum Topic
Well! If weather holds true, I may be able to report this weekend. Rain I wish I still flew!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-03-2017 01:13 PM  3 years ago
Richardmid1

rrProfessor

Leeds, England

MyPosts All Forum Topic
Also check the muffler isn't coming loose.60% of the time, it works every time!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
04-03-2017 11:03 PM  3 years ago
dbldins

rrVeteran

Nicholasville,Ky.

MyPosts All Forum Topic
Thanks for all the info gents! I've returned the low and high slightly and I seem to be fine! Have a little tail wag but that's an issue with TOO many variables.I wish I still flew!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-04-2017 01:16 AM  3 years ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
💎Sustaining Member
I've returned the low and high slightly and I seem to be fine!
Did you mean that you richened the mix a little ?
Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-05-2017 11:27 PM  36 months ago
dbldins

rrVeteran

Nicholasville,Ky.

MyPosts All Forum Topic
Yep. Meant to say richened both.I wish I still flew!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 998 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterEngines Plugs Mufflers Fuel › Bogging down post lift off.
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Friday, April 3 - 5:51 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online