RunRyder RC
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 786 views POST REPLY
Home✈️Aircraft🚁HelicopterHelicopter Main Discussion › Trex700 One-Way Bearing Spacer
03-07-2017 06:25 AM  31 months ago
Topic Vote0Post 1
Mputu

rrVeteran

Belton, TX

MyPosts All Forum Topic
Trex700 One-Way Bearing Spacer
Is anyone knows how I can get spacer for one-way bearing (see attached picture). There is no part number for it, and I am having hard time finding one at local hardware store. It is 18x22.7x0.7mm. I will appreciate any help or feedback, thanks.

Fly hard, Land safe
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2017 06:47 AM  31 months ago
EEngineer

rrProfessor

TX

MyPosts All Forum Topic
Align uses that same part on the 800.

FWIW
Logo 600SXs, 800XX, TDR IIs
SHARE  PM  EMAIL  Attn:RR  Quote
03-07-2017 07:01 AM  31 months ago
Mputu

rrVeteran

Belton, TX

MyPosts All Forum Topic
yes but there is no part number for just the washer/spacer on either 700 or 800 manual.Fly hard, Land safe
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2017 08:34 AM  31 months ago
Busher

rrKey Veteran

Manchester, England

MyPosts All Forum Topic
I found reference to the spacer but only in a hardware bag, the hardware bag is a great buy for spares etc, but a bit much if all you want is a spacer,

https://www.modelhelicopters.co.uk/...rdware-bag.html

The link should get you the part no for the hardware bag and if you look on the small pics under the main picture you will find the shim referenced.

Sorry I have yet to find the spacer exclusively but will keep looking for you. I finally found a friend who machined a few for me maybe you know a machinist?
Good luck
Busher
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2017 11:40 AM  31 months ago
flysti06

rrNovice

lebanon nj usa

MyPosts All Forum Topic
i might have one let me look...Team pilot S&W Fuel, ,Protos 700 max V2
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2017 03:02 PM  31 months ago
grim.the.grim

rrVeteran

Houston, Texas

MyPosts All Forum Topic
Give RCBearings a call. I have called him before for difficult to find bearings, washers, spacers, etc and he has always been very helpful. (720) 737-6998*** Real Pilots BEAT the air into submission! ***
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2017 04:45 PM  31 months ago
Mputu

rrVeteran

Belton, TX

MyPosts All Forum Topic
I finally found a friend who machined a few for me maybe you know a machinist?
I was thinking about it, I know some local machine shops and i will pay the visit for some other jobs anyway.
Fly hard, Land safe
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2017 04:52 PM  31 months ago
Mputu

rrVeteran

Belton, TX

MyPosts All Forum Topic
Thanks Busher, I did take a look at hardware bag, yes it is expensive. But when I google the part number, it seems like only overseas stores has them. is this true statement?Fly hard, Land safe
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2017 04:54 PM  31 months ago
Mputu

rrVeteran

Belton, TX

MyPosts All Forum Topic
Flysti06,

Thanks for the effort I will appreciate it if you can spare one. I am ok for now, I am just trying to rebuild my spare one.
Fly hard, Land safe
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2017 04:58 PM  31 months ago
Mputu

rrVeteran

Belton, TX

MyPosts All Forum Topic
Grim.the.grim,

Thanks for the info. I did call RC Bearings but no one answered the phone, will try again at later time. Thanks again.
Fly hard, Land safe
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2017 05:31 PM  31 months ago
Busher

rrKey Veteran

Manchester, England

MyPosts All Forum Topic
I'm not sure if they are only overseas, I would have thought that was available globally but who knows.Good luck
Busher
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-07-2017 05:51 PM  31 months ago
JWatson

rrKey Veteran

Mustang, OK

MyPosts All Forum Topic
McMaster.com

12mm shim, or whatever size your mainshaft is you are looking for.
Jarrett Watson
http://jarrettrc.wordpress.com/
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-07-2017 06:26 PM  31 months ago
EEngineer

rrProfessor

TX

MyPosts All Forum Topic
That is one odd sized washer.

Even McMaster Carr doesn't have one in that size.
Logo 600SXs, 800XX, TDR IIs
SHARE  PM  EMAIL  Attn:RR  Quote
03-08-2017 12:51 AM  31 months ago
dchekas

rrKey Veteran

Farmington, CT

MyPosts All Forum Topic
The hardware kit includes it.

http://www.aligntrexstore.com/T-REX...09-_p_2171.html

If you own an Align 700, its a very handy kit to have.
Team Align, Team Futaba, Team Byron Fuels, Team Thunder Power
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2017 04:03 AM  31 months ago
Mputu

rrVeteran

Belton, TX

MyPosts All Forum Topic
12mm shim, or whatever size your mainshaft is you are looking for.
Not really the inner diameter must be 18mm, I did not measure the shaft diameter but the shaft its self goes into sleeve which I believe is bigger than 12mm. McMaster.com have all but that particular one.
Fly hard, Land safe
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2017 04:04 AM  31 months ago
Mputu

rrVeteran

Belton, TX

MyPosts All Forum Topic
That is one odd sized washer.
Indeed,
Fly hard, Land safe
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2017 04:06 AM  31 months ago
EEngineer

rrProfessor

TX

MyPosts All Forum Topic
Why would anybody "rig" with a weird sized washer?.....Unless they wanted a "mark-up"....like in a bag full of other parts.

FWIW
Logo 600SXs, 800XX, TDR IIs
SHARE  PM  EMAIL  Attn:RR  Quote
03-08-2017 04:08 AM  31 months ago
Mputu

rrVeteran

Belton, TX

MyPosts All Forum Topic
dchekas

Thanks, I found it in link provided. It is one of the most expensive washer. I love rr, I learn something every time.

Fly hard, Land safe
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2017 04:11 AM  31 months ago
Mputu

rrVeteran

Belton, TX

MyPosts All Forum Topic
please keep it coming if you more ideas or know more about this expensive ans rare washerFly hard, Land safe
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2017 04:30 AM  31 months ago
iyoy

rrVeteran

Bacolod City, Philippines

MyPosts All Forum Topic
Spare Parts
It is expensive for just the washer but the other parts are still useful anyway so it isn't really that bad a deal...unless you lose the same washer again! That same hardware bag is cross referenced for the 550 and the 600 (same parts bag) so if you own these models as well, the bag becomes very handy indeed!
iyoy
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 786 views POST REPLY
Home✈️Aircraft🚁HelicopterHelicopter Main Discussion › Trex700 One-Way Bearing Spacer
 Print TOPIC  Make Suggestion 

 6  Topic Subscribe

Wednesday, October 16 - 7:21 am - Copyright © 2000-2019 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online