RunRyder RC
WATCH
 1 page 1011 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsBrain iKon News  New Brain / iKON firmware 3.0.020 released
03-03-2017 06:56 PM  16 months agoPost 1
ticedoff8

rrKey Veteran

Morgan Hill, CA. USA

My Posts: All  Forum  Topic

As usual Software and Firmware update will be automatic and system will prompt user to update once powered unit is connected to a Windows PC with internet connection active.

Release notes:
- 3.0.020 (firmware 3.0.020)
• Now in Advanced->Common->Receiver, 3 different transmitter dial channels are each accessible to one of 47 different parameters to be able to increase and/or decrease parameter value during flight
- Added under "MANUALS", the "Analogic_integration_by_transmitter_potentiometers.pdf"
- In Advanced in each screen, data are updated at a faster speed
- In Advanced->Setup, the title of the actual active Setup, highlight
- In Advanced->Common->CCPM, the cursors of Pitch Mixer, Aileron Mixer and Elevator Mixer now have graphic full throw
- Minimum value for Cyclic Gains in panel 13 of the Wizard reduced from 10 to 7 (for tri-blades that have low gains)
- Totally re-written the CCPM 135 FW and SW. Now changing Servo Angles in Advanced->Common->CCPM, things change (before Servo Angles does nothing) and reversed CCPM 135 now work with the indicated servo position on the swashplate design/icon (changed name and icon all from 140° to 135° as is ever been the value of this setup)
- Now Check Mode activate also if a Castle Creation ESC is connected but not powered.
• Added the log-able variable "ESC LS RMP (CC max 2500)" for user that don't use Brain Governor and don't have any RPM sensor connected to the Brain. LS mean a Low speed rate compared to a fast hardware RPM sensor
• With Spektrum telemetry, now is transmitted the "Receiver voltage" to the "Flight Log" screen when the receiver don't transmit this info (like SPM4649T receiver)
• For Jeti Integration released a new brain.bin v1.4 file that must be saved in the device folder of the transmitter overwriting the precedent version
• Jeti Integration, added under “Other”, graphic Vibration analysis
• Jeti Integration, added under "Blade Size Preset", two / three blades selection and updated the Elevator D gains
• Jeti Integration, added under "Common Parameters", “Calibration Dial” menu
• Jeti Integration, added under “Other->Counters”, the possibility of reset the four counters
• Jeti Integration, revised some names ("Main Battery mA used" to "Main Battery mAh used", "FramerateTX" to "RxFramerate"
• Jeti Integration, added "Scorpion" to the list of ESC telemetry
- Fixed the problem for which is needed a complete deinstallation and reinstallation of the Windows Software when firmware size grow to a new limit
- Revised the software compatibility with the very old OS "Windows XP"
- Added links to Analogic_integration_by_transmitter_potentiometers.pdf instruction also in the Windows Menu->Program folder
- Under MANUALS, new version of "README_for_Jeti_integration_with_BRAIN.pdf" instruction
- Under MANUALS, new version of "ESC_datas_log_telemetry.pdf" instruction
- English instructions and balloons revised, updated, corrected, completed
- French instructions and balloons revised, updated, corrected, completed
- Russian instructions and balloons revised, updated, corrected, completed
- Interface improvements
- Small bug fixes and optimization/compression/reduction/speed up of the code

Android app will be released tomorrow morning.
iOS app is in review from Apple, and we hope Apple release during next week.
__________________

Believe 1/2 of what you see and none of what you hear.
Fake News will be the downfall of our Republic!

PM  EMAIL  GALLERY  Attn:RR  Quote
03-03-2017 07:20 PM  16 months agoPost 2
ticedoff8

rrKey Veteran

Morgan Hill, CA. USA

My Posts: All  Forum  Topic

• Now in Advanced->Common->Receiver, 3 different transmitter dial channels are each accessible to one of 47 different parameters to be able to increase and/or decrease parameter value during flight
This is pretty cool:

So lets say you need to tune your head gain.
Old way you would setup 3 banks. And then narrow in on the value you like.
New way, it's on a dial (with a limited safe range), and you can immediately find the optimal value.

It really brings tuning to a new, faster level for Brain users.

Also, for Jeti systems, now they can view vibration live in flight on the TX

Believe 1/2 of what you see and none of what you hear.
Fake News will be the downfall of our Republic!

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1011 views POST REPLY
HomeAircraftHelicopterFlybarless Rotor Head SystemsBrain iKon News  New Brain / iKON firmware 3.0.020 released
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Thursday, July 19 - 2:55 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online