RunRyder RC
WATCH
 1 page 716 views POST REPLY
Home✈️Aircraft🚁HelicopterFuel-Helicopters New or Limited ActivityAvant › Need a rubber stopper for the fuel tank
02-08-2017 06:19 PM  3 years ago
Topic Vote0Post 1
FenderBean

rrElite Veteran

Huntsville Alabama

MyPosts All Forum Topic
Need a rubber stopper for the fuel tank
If anyone has an extra one or knows an one that will work let me know. The rubber ring for the fuel tank is tearing and needs to be replaced.
If you have one give me a shout thanks!
https://www.youtube.com/channel/UCE_rywpdgBAxA8bHVCw3VQQ
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-08-2017 09:32 PM  3 years ago
Dan Minick

rrKey Veteran

Columbus, WI

MyPosts All Forum Topic
Could you measure the diameter of the stopper and the diameter of the hole on the tank? This part looks very similar to the Synergy I could send you oneTeam Synergy, Team FBL Rotors-------if its not broke...it will be!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-10-2017 07:12 PM  3 years ago
FenderBean

rrElite Veteran

Huntsville Alabama

MyPosts All Forum Topic
Tank opening is 13mm and the inner diameter of the rubber is 10mmhttps://www.youtube.com/channel/UCE_rywpdgBAxA8bHVCw3VQQ
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-18-2017 06:39 PM  3 years ago
Dan Minick

rrKey Veteran

Columbus, WI

MyPosts All Forum Topic
Have you been able to resolve this with the part?Team Synergy, Team FBL Rotors-------if its not broke...it will be!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-18-2017 11:19 PM  3 years ago
FenderBean

rrElite Veteran

Huntsville Alabama

MyPosts All Forum Topic
No the one you sent me one from another brand would not work.

Not sure if the one sent me was new or used but it tore in the same manner as the stock one. The inner diameter is to small
https://www.youtube.com/channel/UCE_rywpdgBAxA8bHVCw3VQQ
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-19-2017 12:46 AM  3 years ago
Dan Minick

rrKey Veteran

Columbus, WI

MyPosts All Forum Topic
Are you using some sort of lube on the tank stopper? Or it it tearing installing it into the tank itself?Team Synergy, Team FBL Rotors-------if its not broke...it will be!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-19-2017 02:54 AM  3 years ago
FenderBean

rrElite Veteran

Huntsville Alabama

MyPosts All Forum Topic
I install like always will a little lube, the one you sent seemed stiffer than the original. It's a bit brittle it tore when I flexed it to insert one side of the rubber into the tank. I have felt with these before with no issue. I had taken the stock in and out a couple times to replace clunk line from getting old without issue.https://www.youtube.com/channel/UCE_rywpdgBAxA8bHVCw3VQQ
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
02-19-2017 03:57 AM  3 years ago
Dan Minick

rrKey Veteran

Columbus, WI

MyPosts All Forum Topic
Sorry I couldn't help, good luck finding something to work. Perhaps try an auto parts store. They have many rubber grommets that could work.Team Synergy, Team FBL Rotors-------if its not broke...it will be!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-20-2017 10:00 PM  3 years ago
FenderBean

rrElite Veteran

Huntsville Alabama

MyPosts All Forum Topic
thanks for the help, worse case I open the hole and use a standard dubro tank stop.https://www.youtube.com/channel/UCE_rywpdgBAxA8bHVCw3VQQ
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
03-23-2018 08:58 AM  26 months ago
eeeeky

rrVeteran

Vernal UT USA

MyPosts All Forum Topic
Still need one?Lets Fly!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 716 views POST REPLY
Home✈️Aircraft🚁HelicopterFuel-Helicopters New or Limited ActivityAvant › Need a rubber stopper for the fuel tank
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, June 2 - 12:56 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online