RunRyder RC
WATCH
 1 page 1998 views Post Reply
HomeScale Heli🏬Classifieds - Scale Helicopters Sold  TT Agusta A109
09-17-2016 10:01 PM  5 years ago
Topic Vote0Post 1
AFjetmech

rrNovice

Rocky Mount, N.C. USA

MyPosts All Forum Topic
TT Agusta A109
For sale is my beloved Thunder Tiger A109. I have been flying this heli for over 5 years now and it is a beautiful flyer. The fuse was purchased by me new and I first installed my Raptor 90 mechs into it. After a few smoky, vibration filled flights I decided to convert it to electric. I found a conversion thread for R-90's on RR and it worked great. I have included a few pictures of the conversion and the entire mechanics prior to test flying. Soon after the E conversion came the FBL conversion. I obtained a cheap (but very good) Skookum 360 unit to go along with the 401 tail gyro. The Raptor main shaft was cut down slightly to fit a T-rex 700 FBL head. The rest is history. I did have a hard landing from about 15 feet when the motor/esc burned up. Not sure which went first but she landed hard and of course the fuse got beat up a little. I had it repaired and repainted and got the nitro muffler holes filled in the bottom as well. A new motor/esc and I was back in business. Power is regulated from an Outrage 3600 2s lipo (yes older lipo but holding up fine) through an Arizona regulator with pin switch. Nav lighting is an SLS system with side position, top and bottom strobe, and tail strobe. A search/landing light comes on when the gear is down. I will include the full R90 fly bared head with Align paddles if the desire to convert it back is yours. It can be done without removing the mechanics from the fuselage. Local pickup only. I will deliver this heli within one hour of Rocky Mount for serious buyers. $300.00

Components:
Hitec standard retract servo.
Arizona regulator w/pin switch.
SAB main blades.
Align tail blades.
Quick UK tail case upgrade.
Align 700 FBL head.

All electronics stripped except retract servo, Arizona regulator, and lighting system. 2s Lipo included. Everything to convert back to nitro except clutch and fan (can't find them) and upper start shaft bearing block. Or can be left electric like I had by just installing your choice of motor with 6mm shaft. The coupler, pinion, and 5mm support shaft I used is included. I have a good running Align 91H with muffler I can sell with it if interested. Also another one not running to throw in for spare parts.

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-21-2016 07:46 PM  5 years ago
cnchelicopter

rrNovice

Riverside, CA

MyPosts All Forum Topic
Nice...I have the same heli...still nitro powered. I like your E conversion. Do you have any xtra conversion kit?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-22-2016 05:58 PM  5 years ago
AFjetmech

rrNovice

Rocky Mount, N.C. USA

MyPosts All Forum Topic
No kit. The motor mount is just aluminum plate. The coupling and 5mm shaft for the pinion came from Stock Drive products. You can find a conversion thread somewhere here on RR.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-25-2016 10:01 PM  5 years ago
don s

rrElite Veteran

Chesapeake, VA

MyPosts All Forum Topic
Very nice machine, I have seen it many times in person.E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
09-26-2016 01:46 PM  5 years ago
AFjetmech

rrNovice

Rocky Mount, N.C. USA

MyPosts All Forum Topic
Will include original 80a ESC I had in it and 401 gyro. Come get this out of my man cave.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
11-14-2016 03:52 AM  4 years ago
mainstray

rrNovice

South Jersey - US of A

MyPosts All Forum Topic
My Classified Activity
No Classified Feedback
Add Classified Feedback
Will you ship to 08078 (NJ)?
If so, whats your price?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-30-2017 03:35 AM  4 years ago
AFjetmech

rrNovice

Rocky Mount, N.C. USA

MyPosts All Forum Topic
Sold
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1998 views Post Reply
HomeScale Heli🏬Classifieds - Scale Helicopters Sold  TT Agusta A109
Print TOPIC

 3  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Sunday, September 26 - 1:21 pm - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online