RunRyder RC
WATCH
 1 page 877 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsFutaba CGY › CGY750: do not react on AIL movement
07-02-2016 11:12 PM  4 years ago
Topic Vote0Post 1
Knud Pedersen

rrKey Veteran

Denmark - Europe

MyPosts All Forum Topic
CGY750: do not react on AIL movement
Hi
Just got my CGY back from service - crashed with it because it was uncontrollable. But they did not find any failure on the unit.....

I have now updated it the V2 and installed it in a 450.

BUT when I tilt the helicopter (on the table) to side the swash plate/CGY does not counter steer - or at least I can see it moves...

It does counter steer when I tilt up/down (ELE)

I can steer the Swash all around with the TX stick.

I have tried to run it with 100% gain (can see the gain for ELE and AIL in the CGU display shows 100% AVCS....

Wonder if the unit is not working correctly
ChopperKnud
Team Miniature Aircraft
ThePitchbrothers
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-02-2016 11:58 PM  4 years ago
qroadrunner96

rrNovice

Birmingham, AL

MyPosts All Forum Topic
Cgy 750
I would reset the unit and start over and if things dont work right send it back again
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-03-2016 12:59 PM  4 years ago
Knud Pedersen

rrKey Veteran

Denmark - Europe

MyPosts All Forum Topic
I've reset all menus and even updated it again.
Still the same.

Tried it with other model in the TX and vs.
Still the same.
So I guess it's not working correctly....will contact the service center - again
ChopperKnud
Team Miniature Aircraft
ThePitchbrothers
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-03-2016 02:40 PM  4 years ago
Dr.Ben

rrMaster

Richmond, VA, USA

MyPosts All Forum Topic
Slow down a sec.......which firmware?

Ben Minor
Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-05-2016 10:17 PM  4 years ago
Knud Pedersen

rrKey Veteran

Denmark - Europe

MyPosts All Forum Topic
I updated this CGY to software version v2 after i got it back from Ripmax and installed it in a furion 450. ...

This CGY was originally in my Fury 55 and I craahed the heli because it was uncontroable. Think it was with sw 1.3 or 1.4.

Bug a second hand CGY for my Fury55 and updated it ti v2 No issue.

I do have a short video showing the issue. Will opload it to YT tomorrow.
ChopperKnud
Team Miniature Aircraft
ThePitchbrothers
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-07-2016 12:52 AM  4 years ago
kcordell

rrElite Veteran

O Fallon, MO

MyPosts All Forum Topic
Right Function for AIL Gyro in function menu?Team Synergy/Rail, Team Scorpion, YS Engines, VelTye
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-07-2016 01:46 AM  4 years ago
Dr.Ben

rrMaster

Richmond, VA, USA

MyPosts All Forum Topic
If he's using 3D mode in 2.0, there is no sep Ail gyro gain. Both axes are under one channel as head gain.

Ben Minor
Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-09-2016 10:22 AM  4 years ago
Knud Pedersen

rrKey Veteran

Denmark - Europe

MyPosts All Forum Topic
I do use 3d mode.
RIPMAX jusr comfirm that the unit had a.mal function.
Bought a replacement unit.
ChopperKnud
Team Miniature Aircraft
ThePitchbrothers
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 877 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsFutaba CGY › CGY750: do not react on AIL movement
Print TOPIC

 4  Topic Subscribe

Wednesday, September 30 - 8:38 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online