RunRyder RC
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 1497 views Post Reply
Home✈️AircraftMulti-Rotore-Multi-Rotor Main DiscussionJR › Cc3d flight controller can't calibrate transmitter
07-01-2016 02:40 AM  4 years ago
Topic Vote0Post 1
JamieD

rrApprentice

Salt Lake City UT

MyPosts All Forum Topic
Cc3d flight controller can't calibrate transmitter
Picked up a 250 quad with cc3d flight controller, downloaded software got the quad calibrated, but when I start the transmitter wizard, it doesn't recognize any transmitter inputs
Probably just got an expensive paperweight
SHARE  PM  EMAIL  Attn:RR  Quote
07-01-2016 02:58 AM  4 years ago
KJH

rrVeteran

Interlochen, MI, U.S.A.

MyPosts All Forum Topic
I'm using CC3D Atoms in a couple 250 racing quads. They're working good for me. Are you using OpenPilot or LibrePilot software? Either should work. PWM or SBUS?-Kevin
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-01-2016 03:01 AM  4 years ago
JamieD

rrApprentice

Salt Lake City UT

MyPosts All Forum Topic
Libre pilot
JR 9503 transmitter with orange reciever dsm2
SHARE  PM  EMAIL  Attn:RR  Quote
07-01-2016 03:07 AM  4 years ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
I just picked up a 450 quad with the cc3d (not the atom) controller and I have the same transmitter as you.... JR 9503....... No problem at all.... there's something you're missing along the way.....

Have you checked out the youtube videos ???
Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-01-2016 03:13 AM  4 years ago
JamieD

rrApprentice

Salt Lake City UT

MyPosts All Forum Topic
The videos say ,and then you calibrate it, nothing about what if it doesn't work
SHARE  PM  EMAIL  Attn:RR  Quote
07-01-2016 03:17 AM  4 years ago
KJH

rrVeteran

Interlochen, MI, U.S.A.

MyPosts All Forum Topic
I agree with Juan, check YouTube videos. Is the receiver bound to the transmitter? Also, check the firmware version. You may possibly need to update it on the CC3D FC.-Kevin
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-01-2016 03:18 AM  4 years ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
Did you install the latest firmware from LibrePilot on your CC3D ???Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-01-2016 03:24 AM  4 years ago
JamieD

rrApprentice

Salt Lake City UT

MyPosts All Forum Topic
Transmitter and reviews are bound
I updated the latest version to the flight controller
SHARE  PM  EMAIL  Attn:RR  Quote
07-01-2016 03:34 AM  4 years ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
You've answered my next questions already.... ie, transmitter on and bound to the receiver.....

Don't know then.... you've tried re-booting everything ?? Computer, controller, etc. .... ??

Mine works as advertised....
Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-01-2016 04:05 AM  4 years ago
Dr.Tim

rrElite Veteran

Mojave Desert

MyPosts All Forum Topic
Bind Receiver First!
Yes I have done the same thing!
From Simple minds come simple ideas! Approach Engineering
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-01-2016 01:31 PM  4 years ago
JamieD

rrApprentice

Salt Lake City UT

MyPosts All Forum Topic
I will start over fro scratch again tonight
same with my DJI hexcopter, but when programming the naza, it sees the transmitter, it just won't arm
SHARE  PM  EMAIL  Attn:RR  Quote
07-01-2016 02:08 PM  4 years ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
So, are you talking about the naza controller ?? I thought we were discussing the cc3d controller and software Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-01-2016 03:24 PM  4 years ago
JamieD

rrApprentice

Salt Lake City UT

MyPosts All Forum Topic
Sorry, I am having problems with both,
yes we have been talking about cc3d for my quad
SHARE  PM  EMAIL  Attn:RR  Quote
07-01-2016 05:56 PM  4 years ago
JamieD

rrApprentice

Salt Lake City UT

MyPosts All Forum Topic
I believe it user error
hope I can get it ironed out tonight
SHARE  PM  EMAIL  Attn:RR  Quote
07-01-2016 10:38 PM  4 years ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
Go over your wiring... make sure that the connectors are oriented properly.... ie, the signal wire on the signal pin on the cc3d, etc....

Ok, let us know what you find.

PS, you can always post a picture of your setup..... you know what they say, a pic is worth...... well, you know ....
Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-02-2016 02:06 AM  4 years ago
JamieD

rrApprentice

Salt Lake City UT

MyPosts All Forum Topic
Ok, found my mistake
when selecting reciever type,I selected spectrum,since I am using that tech
I should have selected the 1st type listed
just did a quick test fly on what little battery I had left

Tomorrow I will work on the naza setup on my 550 hex
Thanks for letting me bounce the difficulties around with you guys
SHARE  PM  EMAIL  Attn:RR  Quote
07-02-2016 02:09 AM  4 years ago
KJH

rrVeteran

Interlochen, MI, U.S.A.

MyPosts All Forum Topic
Glad you got it working. Onward!-Kevin
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-02-2016 02:11 AM  4 years ago
JamieD

rrApprentice

Salt Lake City UT

MyPosts All Forum Topic
Never give up
Never surrender
SHARE  PM  EMAIL  Attn:RR  Quote
07-02-2016 02:03 PM  4 years ago
JuanRodriguez

rrProfessor

The Villages, Florida

MyPosts All Forum Topic
Humm, I don't recall being asked for "transmitter type " during setup.....

Glad u got it sorted !
Been there, done that and old enough to know better.....
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-02-2016 11:20 PM  4 years ago
JamieD

rrApprentice

Salt Lake City UT

MyPosts All Forum Topic
Looks like I got my naza DJI 550 working also
SHARE  PM  EMAIL  Attn:RR  Quote
WATCH
 2 pages [ <<    <    ( 1 )     2     NEXT    >> ] 1497 views Post Reply
Home✈️AircraftMulti-Rotore-Multi-Rotor Main DiscussionJR › Cc3d flight controller can't calibrate transmitter
Print TOPIC

 4  Topic Subscribe

Monday, September 28 - 9:57 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online