RunRyder RC
WATCH
 1 page 825 views POST REPLY
05-29-2016 04:33 PM  3 years ago
Topic Vote0Post 1
motorhead540

rrApprentice

eaglecreek,oregon - USA

MyPosts All Forum Topic
Predator head question ??
Hello ,While working on setting up my helicopter I came up with a question on the head . I have several heads to chose from noticed that the bell mixer arm ratio is adjustable .
On page 5 of the nx & se manual it shows ratios for the 3 holes on the long end of the rocker with suggestions for flying style ,
but the short end of the bell mixing arm has 2 holes as well the rod on this end goes down to the swash plate . out of the 4 heads I have here to use 2 have been assembled with the inner holes and 2 in the outer holes .
Does anyone know what the suggested hole for what style of flying is .
from my thinking of how the control rod works the outer hole would make it have less throw with relation to swash movement .

any help appreciated thanks merril "motorhead540"
wife says if i'm going to be an addict at least its to a heli
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-29-2016 04:55 PM  3 years ago
Salesmanheliboy

rrVeteran

Nashville, TN

MyPosts All Forum Topic
Are the manuals still available for download? If so, there is a good matrix, in the Pred manual that handles that.

Tim
Futaba - Kontronik -SAB Helicopters - GensAce -http://rotorworld.co.uk/
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-29-2016 05:04 PM  3 years ago
Pistol Pete

rrProfessor

Seffner, FL

MyPosts All Forum Topic
💎Sustaining Member
The lowest mixing ratio makes them more docile. Holes closest to center.~~Enjoying the hobby one flight at a time~~
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-29-2016 09:14 PM  3 years ago
motorhead540

rrApprentice

eaglecreek,oregon - USA

MyPosts All Forum Topic
Are the manuals still available for download? If so, there is a good matrix, in the Pred manual that handles that.
Tim

I see the matrix but it does not show the two holes in the short side of the bell mixing arm only one . step 4 page #5 of the Predator NX Gas & Gas se manual

in the matrix the inner hole for the long side of the arm shows as sport and FAI with a 1:1 ratio but that changes if the ball is installed in a different hole on the short side of the Bell mixing arm ie closer or further from the pivot point

maybe there is an older manual that showed more details that I am missing but I have received 4 manuals with the different Predator
bundles I have and all seem to be the same
wife says if i'm going to be an addict at least its to a heli
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 825 views POST REPLY
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Monday, April 6 - 9:02 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online