RunRyder RC
WATCH
 1 page 1141 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsBeastX › Stick deadband setting
05-27-2016 11:48 AM  3 years ago
Topic Vote0Post 1
Richardmid1

rrProfessor

Leeds, England

MyPosts All Forum Topic
Stick deadband setting
So yesterday I thought ide drop the stick deadband from default (red flashing) to the first position (purple). Makes a huge difference to precision when hovering and small corrections in general! Much more precise. Just thought ide share.
60% of the time, it works every time!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-04-2016 04:17 AM  3 years ago
Merritt

rrNovice

Austin, Texas

MyPosts All Forum Topic
What transmitter are you using?AMA 831578
IRCHA 4503
RCHN 754
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-04-2016 07:34 AM  3 years ago
Richardmid1

rrProfessor

Leeds, England

MyPosts All Forum Topic
An original dx7.60% of the time, it works every time!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-10-2016 02:37 PM  3 years ago
Richardmid1

rrProfessor

Leeds, England

MyPosts All Forum Topic
There is nothing wrong with the pots on the radio BTW, the BeastX comes with a lot of deadband on the default setting. It's a bit like having lots of steering wheel play and trying to drive in a straight line!60% of the time, it works every time!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
10-12-2016 02:38 PM  3 years ago
Four Stroker

rrElite Veteran

Atlanta

MyPosts All Forum Topic
All TX pots and Hall Effect sensors have hysteresis. This would make your FBL heli wander around all over the place. It is assumed that you don't really want to put in a tiny bit of ail/ele input so the FBL unit snaps to center whenever the signal is close. Many high end TX do the same thing. Too much is not good for F3A or old FAI FB helis. But for 3D it is fine. Something to play with.

Hall effect sensors have something like 1.5 degrees of hysteresis. So you are not going to put in tiny inputs since it is programmed out. So why do we have 90 deg. / 2048 servos ? Certainly not needed for 3D.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1141 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsBeastX › Stick deadband setting
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Sunday, April 5 - 11:45 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online