RunRyder RC
WATCH
 1 page 656 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsV-Bar › dx9 neo rescue and beginer mode setup
05-17-2016 08:51 PM  4 years ago
Topic Vote0Post 1
AA simon

rrApprentice

barcelos, portugal

MyPosts All Forum Topic
dx9 neo rescue and beginer mode setup
I have been reading the other vbar threads and am now confused again,

the neo has a beginner mode? if so how do I activate it?

I have a neo with the pro rescue software but I do not see a option for beginner setup, what am I doing wrong?

thanks
Simon Ribeiro
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-17-2016 09:05 PM  4 years ago
cudaboy_71

rrElite Veteran

sacramento, ca, u.s.

MyPosts All Forum Topic
I think you get the option when you change the pulldown menu from rescue only to rescue and beginner in setup:

if it ain't broke, break it.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-17-2016 09:08 PM  4 years ago
AA simon

rrApprentice

barcelos, portugal

MyPosts All Forum Topic
computer software, I have a dx9 is it only for v control?Simon Ribeiro
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-17-2016 09:09 PM  4 years ago
cudaboy_71

rrElite Veteran

sacramento, ca, u.s.

MyPosts All Forum Topic
ha...you are faster than my ninja edit. I reread your title after I posted and corrected my response.

Also, I'll credit user Vinger for this bit. But, he sums it up quite nicely:
Rescue stays on until the heli is upright and climbing, it does not depend on you holding the switch in on position neither does it stop when you let go of the switch. Only thing it needs is to be off position to be ready for the next rescue. So a spring loaded switch is the ideal one to use for rescue..

BEGINNER ONLY selection is just that always on and limiting the bank and pitch angle of the helicopter.

RESCUE & BEGINNER is selectable options via a switch, meaning that beginner mode can be selected and rescue can be activated via switches. Never used it myself in any of the beginner mode, but this is my understanding from reading up about it.
if it ain't broke, break it.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-17-2016 09:18 PM  4 years ago
AA simon

rrApprentice

barcelos, portugal

MyPosts All Forum Topic
thanks,

I had never even seen that menu.

I will have a play when I get some time but thanks for your help.
Simon Ribeiro
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-17-2016 09:19 PM  4 years ago
cudaboy_71

rrElite Veteran

sacramento, ca, u.s.

MyPosts All Forum Topic
you only get it if the unit is upgraded to Pro-Rescue. So, if you set up your heli, then upgraded the NEO you never would have seen it.

Good luck.
if it ain't broke, break it.
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
WATCH
 1 page 656 views Post Reply
HomeRC & Power✈️Aircraft🚁HelicopterFlybarless Rotor Head SystemsV-Bar › dx9 neo rescue and beginer mode setup
Print TOPIC

 2  Topic Subscribe

Wednesday, October 28 - 11:55 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online