RunRyder RC
WATCH
 8 pages [ <<    <     2      3     ( 4 )     5      6     NEXT    >> ] 10431 views Post Reply
HomeScale✈️AircraftScale HeliScale Helicopter Main Discussion › Roban 700 AS350 Mechanics Vibration Fix's
05-21-2016 12:33 AM  4 years ago
Copter Doctor

rrProfessor

Enterprise/ft.rucker ,al- home of army aviation

MyPosts All Forum Topic
Yeah Dennis, I used the century head at first until I got the starflex head. the century head will work on a 12mm shaft, the adaptor it comes with is so it can be used on a 10mm shaft which you wont need. I will fabricate a follower for you if you like. I have to make sure I have a mast collar for a 12mm shaft drive a rotary, fly a rotorcraft
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-21-2016 01:25 AM  4 years ago
TailKiller

rrApprentice

Panama City, FL

MyPosts All Forum Topic
Wow.. I was just joking about you building a follower. But thanks. Century does have a multi rotor follower but it must be made of gold its 45 bucks. The Align 3g head I have on the jet ranger has an independent follower. I was hoping to find something like that in 12mm. I was waiting to see if anyone else had any input on where one might be.
The swash is ready and the head should be here Tuesday. Now I just have to determine the swash to grip rod length.
Dennis
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-21-2016 01:30 AM  4 years ago
Copter Doctor

rrProfessor

Enterprise/ft.rucker ,al- home of army aviation

MyPosts All Forum Topic
no worries. I never liked the followers from century, they are just too bulky especially for the 4 and 5 bladed setups. for a 3 they may not be so bad since there is more room in the 360 degrees of space for the follower to share with three pitch rods. once the head is in, you can easily measure how long to make each pc rod.drive a rotary, fly a rotorcraft
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-23-2016 08:15 PM  4 years ago
TailKiller

rrApprentice

Panama City, FL

MyPosts All Forum Topic
Any thoughts please.. Everything is as it should be. Links are equal, travel is equal, ball link servo horn locations are equal.
Now this is an issue that I have had since the start of this project. I have adjusted links, played with travels. checked the the elevator is secure to the linkage assembly rod correctly and that there is no elevator play in the linkage. And it did it with the Futaba servos and now with the Align servos. This is the best I can get it.
The good thing is that it is level while in the hovering flying range. So it's effect are minimal during flight. I just want to know why it is doing this. Emile, remember I asked you to check Roy's mechs to see if it was doing the same thing.

https://www.youtube.com/edit?o=U&fe..._id=rk29bTvX7_U
Dennis
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-23-2016 08:19 PM  4 years ago
TailKiller

rrApprentice

Panama City, FL

MyPosts All Forum Topic
Sorry bout that.. Wrong link.

Watch at YouTube

Dennis
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-23-2016 11:27 PM  4 years ago
Copter Doctor

rrProfessor

Enterprise/ft.rucker ,al- home of army aviation

MyPosts All Forum Topic
definitely some tilt going on with collective movement but its very little. I still have Roy's apart, I am doing it a little ata time cuz I will start cussing lol!drive a rotary, fly a rotorcraft
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-24-2016 12:53 AM  4 years ago
TailKiller

rrApprentice

Panama City, FL

MyPosts All Forum Topic
Hey!! Got me a little mad skills happening here.
I don't know how it will fit with the century head, but we'll see.
That is a Align 600 flybar washout block I knocked out the 10mm brass sleeve and now it's 12mm.

Dennis
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-24-2016 02:05 AM  4 years ago
Copter Doctor

rrProfessor

Enterprise/ft.rucker ,al- home of army aviation

MyPosts All Forum Topic
There ya go! easy peasy!drive a rotary, fly a rotorcraft
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-24-2016 12:27 PM  4 years ago
Mojave

rrElite Veteran

Palos Verdes, Ca. USA

MyPosts All Forum Topic
Nice trick!! You can resurrect the scale tip of the week thread and add this to it.
Barry
All helis and planes have an expiration date stamped on them...you only find it after you crash!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-25-2016 04:02 PM  4 years ago
TailKiller

rrApprentice

Panama City, FL

MyPosts All Forum Topic
Shipping Blues
Heli-World still has not shipped my rotor head. It didn't go out last Friday. I called Monday and they said it would ship that afternoon but it didn't. Same thing yesterday. I'll call again today. What's up with that?
Hurry up an wait!! Life story.
Dennis
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-26-2016 02:50 AM  4 years ago
Mojave

rrElite Veteran

Palos Verdes, Ca. USA

MyPosts All Forum Topic
I bought 2 of the 5 blade heads. I got an email stating that they were relocating the warehouse and the heads would be shipped after they found them...
Barry
All helis and planes have an expiration date stamped on them...you only find it after you crash!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-26-2016 03:20 AM  4 years ago
teamdavey2001

rrApprentice

Sunnyvale, California, USA

MyPosts All Forum Topic
Having similar problems here too
SHARE  PM  EMAIL  Attn:RR  Quote
05-26-2016 03:37 AM  4 years ago
TailKiller

rrApprentice

Panama City, FL

MyPosts All Forum Topic
I called again today and they said it went out yesterday and gave me a tracking number. As of 5 minutes ago the USPS doesn't have it..
I know sometimes the usps tracking runs a little behind. We'll see what it shows in the AM.
Dennis
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-26-2016 01:34 PM  4 years ago
Copter Doctor

rrProfessor

Enterprise/ft.rucker ,al- home of army aviation

MyPosts All Forum Topic
yeah the move has messed things up a bit. my last shipment tracking never showed any activity other than order received and still only showed that when the package arrived.drive a rotary, fly a rotorcraft
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
05-26-2016 02:14 PM  4 years ago
old nitroman

rrVeteran

Naples florida

MyPosts All Forum Topic
USPS is always behind for me most times take a least 48 hrs to show up on the tracking, most of the time package comes in then they show it in town delivery next day, and I already have itE5s and E7se,and a 766, Roban bell 222 800 superscale,450 bell 4 bladed head,gobby 380and 420 ,180cfx
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-26-2016 02:28 PM  4 years ago
Whopper Chopper

rrVeteran

Atlanta, GA

MyPosts All Forum Topic
Ordered mine on the 19th and received it on the 23rd.
SHARE  PM  EMAIL  Attn:RR  Quote
05-26-2016 03:14 PM  4 years ago
TailKiller

rrApprentice

Panama City, FL

MyPosts All Forum Topic
Ahhh! Delivery Saturday 5/28 per USPS.Dennis
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-27-2016 05:42 PM  4 years ago
eiichivr

rrNovice

tamano.okayama,japan

MyPosts All Forum Topic
swash plate,youtube.
I saw a movie of the swash of movement.
Does it kill the movement of the gyro?
Three of the servo, feel like not to adjust the left and right of the travel.
Horizontal pitch in the middle. Horizontal at full pitch, the adjustment of the lowest.
But all is repaired by adjusting the transmitter, it is the first work.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-27-2016 06:14 PM  4 years ago
TailKiller

rrApprentice

Panama City, FL

MyPosts All Forum Topic
Thanks Eiichivr,
I am just now starting to look at this issue again and see if I can get it worked out. In the past, any travel adjustment seemed to make it worst. But I was also adjusting the elevator travel only..
The bubble is within the level marks in a hover.. and doesn't seem to effect flying. But I do want it right.
Dennis
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
05-27-2016 06:54 PM  4 years ago
Mojave

rrElite Veteran

Palos Verdes, Ca. USA

MyPosts All Forum Topic
Just my .002 regarding the swash level movement while bench testing the collective. I didn't go back and read the entire thread, so I don't know what FBL unit you are using. FBL units will sometimes have odd swash interactions while bench testing that they do no exhibit in normal flight. IMHO, put the FBL unit in set up mode (servo arms centered, link lengths set), then set the swash level and leave it. I think that as long as the heli flies correctly, you're good to go. If it exhibits strange behavior in flight, then you have an issue.
Barry
All helis and planes have an expiration date stamped on them...you only find it after you crash!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 8 pages [ <<    <     2      3     ( 4 )     5      6     NEXT    >> ] 10431 views Post Reply
HomeScale✈️AircraftScale HeliScale Helicopter Main Discussion › Roban 700 AS350 Mechanics Vibration Fix's
Print TOPIC

 12  Topic Subscribe

Sunday, October 25 - 12:37 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online