RunRyder RC
WATCH
 1 page 1402 views TOPIC CLOSED
Home✈️Aircraft🚁HelicopterSynergy R/CSynergy N5c › Pivot ball N5c
03-27-2016 08:08 PM  3 years ago
Topic Vote0Post 1
datidun

rrElite Veteran

N Ireland

MyPosts All Forum Topic
Pivot ball N5c
Hi looking for some help on the Pivot ball part number for my servos,its not in the manual and not in the Synergy store,the thread is 6mm, did research in Uk stores,nothing comes up with that thread length,please forward the part number.
Thank you.
SHARE  PM  EMAIL  GALLERY  Attn:RR
03-27-2016 09:55 PM  3 years ago
geomecc

rrKey Veteran

Long Island ,NY

MyPosts All Forum Topic
is that the one thats 2mm x 6mm long?R I P Roman Jr. Team SKOOKUM SRW EFC
SHARE  PM  EMAIL  GALLERY  Attn:RR
03-27-2016 11:14 PM  3 years ago
datidun

rrElite Veteran

N Ireland

MyPosts All Forum Topic
Yes,looking for the part number.
SHARE  PM  EMAIL  GALLERY  Attn:RR
03-27-2016 11:15 PM  3 years ago
Chuck Bole

rrElite Veteran

Tulsa Ok. U.S.A.

MyPosts All Forum Topic
These are what i think you are talking about.

107-104

http://mattbotos.com/store/index.ph...roducts_id=1192

chuck
Team Synergy Field Representative / Rail Blades / Scorpion Power Systems / HeliLids
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
03-27-2016 11:19 PM  3 years ago
datidun

rrElite Veteran

N Ireland

MyPosts All Forum Topic
The 107-104 of here is 2mm,the part seems different,this one looks like it comes off the head.http://www.fast-lad.co.uk/store/107...all-p-1740.html
This is the wrong one,its not for servo horns.
SHARE  PM  EMAIL  GALLERY  Attn:RR
03-27-2016 11:23 PM  3 years ago
Chuck Bole

rrElite Veteran

Tulsa Ok. U.S.A.

MyPosts All Forum Topic
Those you posted look like these.

http://mattbotos.com/store/index.ph...roducts_id=1193
Team Synergy Field Representative / Rail Blades / Scorpion Power Systems / HeliLids
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
03-27-2016 11:25 PM  3 years ago
datidun

rrElite Veteran

N Ireland

MyPosts All Forum Topic
Yes but its got the 107-104 number,something is wrong there,are those balls from the N9 perhaps as I have been looking under the N5C parts.
SHARE  PM  EMAIL  GALLERY  Attn:RR
03-27-2016 11:37 PM  3 years ago
Chuck Bole

rrElite Veteran

Tulsa Ok. U.S.A.

MyPosts All Forum Topic
Pretty sure the balls from the N9 N5 N5c E6/7 E7SE E5 N7 766 are the same between the models.

Only different ones are for the tail pitch slider. The SE and 766 use a different one.

here is what a search of Matt's store turned up for "ball"

http://mattbotos.com/store/index.ph...rd=ball&x=0&y=0

I think fastlad has put the wrong pic up for that part number.

chuck
Team Synergy Field Representative / Rail Blades / Scorpion Power Systems / HeliLids
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
03-27-2016 11:46 PM  3 years ago
Chuck Bole

rrElite Veteran

Tulsa Ok. U.S.A.

MyPosts All Forum Topic
Also unless you have a supply of them don't forget the M2 nuts..

http://mattbotos.com/store/index.ph...roducts_id=1343
Team Synergy Field Representative / Rail Blades / Scorpion Power Systems / HeliLids
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR
03-28-2016 09:25 AM  3 years ago
datidun

rrElite Veteran

N Ireland

MyPosts All Forum Topic
Ok will try Midlands,the fuel tank was a problem as well,the one in the UK the hole is about 2 mm larger than the one from the Synergy store,this causes the Bung to leak,it must be an older version,I am now using the Trex 600 Bung that works,thanx for the help Chuck.
SHARE  PM  EMAIL  GALLERY  Attn:RR
WATCH
 1 page 1402 views TOPIC CLOSED
Home✈️Aircraft🚁HelicopterSynergy R/CSynergy N5c › Pivot ball N5c
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Wednesday, January 29 - 8:26 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online