RunRyder RC
WATCH
 1 page 440 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › CGY750 + CC 160HV - Electronic Gov tuning help
03-24-2016 02:36 PM  29 months agoPost 1
suthae

rrNovice

Kuala Lumpur, Malaysia

My Posts: All  Forum  Topic

Guys,

Need your help to get better e-gov performance out of my CGY750 and CC160 setup.

I am running V2.0 on the CGY 750, and the default Gov gain of 30% cause severe tail wag in pitch load.

I had to reduce the gain to 11% to remove the tail wag, and further to 8% to remove gov chirping.

Is this a normal gain value? I feel the Headspeed is too sluggish and not recovering well in high load moves.

I am usining new packs that has just been broken in, so it is not an issue with my packs.

Appreciate suggestions on how I can tune the governor better.

PM  EMAIL  Attn:RR  Quote
03-24-2016 03:40 PM  29 months agoPost 2
don s

rrElite Veteran

Chesapeake, VA

My Posts: All  Forum  Topic

I'm running "Silent" at 10% gain on V1.4. Seems to work. I was using a higher gain, but got hunting.

You may want to also experiment with the settings in the ESC, like timing, frequency, etc.

E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.

PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 440 views POST REPLY
HomeAircraftHelicopterRadio - Servo - Gyro - Gov - Batt › CGY750 + CC 160HV - Electronic Gov tuning help
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Tuesday, August 21 - 9:00 pm - Copyright © 2000-2018 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online