RunRyder RC
WATCH
 1 page 1206 views POST REPLY
HomeRC & Power✈️Aircraft🚁Helicoptere-Castle Electric Components › Gov head speed settings
03-24-2016 03:36 AM  3 years ago
Topic Vote0Post 1
artimus

rrKey Veteran

Buckley WA

MyPosts All Forum Topic
Gov head speed settings
I have the gov set to the 30 70 100 in set rpm mode.
What happens if you set the % up or down...does it change the rpm?
If it was set to say 25 60 90 would the rpm lower or would it cause the esc problems?
Fly Hard......Team Viagra
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-12-2016 02:47 PM  3 years ago
Richardmid1

rrProfessor

Leeds, England

MyPosts All Forum Topic
Why would you want to do that?60% of the time, it works every time!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-12-2016 05:12 PM  3 years ago
don s

rrElite Veteran

Chesapeake, VA

MyPosts All Forum Topic
Maybe he wishes to tweak the rpm without connecting to a pc?E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-12-2016 05:17 PM  3 years ago
Richardmid1

rrProfessor

Leeds, England

MyPosts All Forum Topic
I don't think the governor works like that. The throttle curve numbers have nothing to do with head speed.60% of the time, it works every time!
SHARE  PM  EMAIL  HOMEPAGE  GALLERY  Attn:RR  Quote
07-12-2016 07:05 PM  3 years ago
don s

rrElite Veteran

Chesapeake, VA

MyPosts All Forum Topic
I was just speculating as to his motivations....

Cause I'm bored.
E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-13-2016 01:05 AM  3 years ago
pctomlin

rrVeteran

Texas

MyPosts All Forum Topic
Nothing will change on the head speed until you cross the boundary into another rpm setting in set rpm mode. Setting high to 90 has placed you into the middle rpm setting so you now only have two of the three speeds you set up.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
07-14-2016 01:17 AM  3 years ago
artimus

rrKey Veteran

Buckley WA

MyPosts All Forum Topic
The reason is because the Hobbywing esc can be fine tuned this way i was wondering if CC esc can be done at the field this way.....not wanting to do it but just courious.Fly Hard......Team Viagra
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
08-01-2016 03:01 AM  3 years ago
BrianApp

rrVeteran

Grand Rapids, MI

MyPosts All Forum Topic
I haven't used it but I am pretty sure that is what governor simple mode does. You set a flat TC, say %70, and whatever head speed that gives you is what it locks on to and maintains. If you want a bit more just bump the TC up a bit. You can adjust the HS at the TX but with out a tach you won't know exactly what it is.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
01-07-2017 01:21 PM  3 years ago
jtv62161

rrApprentice

Oakdale Pa / Quaker city Ohio / Bradenton FL

MyPosts All Forum Topic
talon 90
I believe and rpm change has to be done in the castle link software concerning the governor.
Logo 400/400se/550se/Align 550/700DFC
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 1206 views POST REPLY
HomeRC & Power✈️Aircraft🚁Helicoptere-Castle Electric Components › Gov head speed settings
 Print TOPIC  Make Suggestion 

 3  Topic Subscribe

Tuesday, January 28 - 6:27 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online