RunRyder RC
WATCH
 1 page 390 views Post Reply
Home🏬 Classifieds✈️Aircraft🚁Helicopter🏬Classifieds - Trade WantedOther Sold  flybar for ergo 60 ISO
03-08-2016 02:16 PM  5 years ago
Topic Vote0Post 1
allns47

rrKey Veteran

Richmond IN.

MyPosts All Forum Topic
flybar for ergo 60 ISO
tryng to locate,,,,,could I use any 4mm flybar rod,,
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2016 03:16 PM  5 years ago
BeltFedBrowning

rrKey Veteran

Kansas City

MyPosts All Forum Topic
I have mixed and matched flybars for many of my helicopters. I even used a Predator head on one of my JR gassers! The important part is the length. If you are using aftermarket paddles, You can use just about any flybar in the right diameter.
4mm x 530mm? Am I correct?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2016 05:11 PM  5 years ago
allns47

rrKey Veteran

Richmond IN.

MyPosts All Forum Topic
flybar
that's what I was think in....I have a 4x530 fly bar but was concerned there is not flat spots on the bar I have for the mixing arm to tighten up to?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2016 05:17 PM  5 years ago
BeltFedBrowning

rrKey Veteran

Kansas City

MyPosts All Forum Topic
If you are using the aluminum arms, you don't need the flat spots. You just have to eyeball them when you install.

JR flybars are pretty soft, so get the arms level before you tighten the set screws because the set screws will mark up the flybar and make it difficult to reposition the arm. Every time you tighten the set screw, it wants to pop back into the groove that it made in the flybar.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-08-2016 06:25 PM  5 years ago
allns47

rrKey Veteran

Richmond IN.

MyPosts All Forum Topic
ok thanks,,that was my main concern
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 390 views Post Reply
Home🏬 Classifieds✈️Aircraft🚁Helicopter🏬Classifieds - Trade WantedOther Sold  flybar for ergo 60 ISO
Print TOPIC

 1  Topic Subscribe

Classifieds › HELP-FAQ
Attention Buyers! To receive feedback Post Reply in the seller’s topic. The seller can then click your post's Add Classified Feedback link.
Attention Sellers! Stating price is not mandatory but recommended. Post Reply commentary that interferes with the selling process (and not replied to) will be removed upon request. Click Attn:RR on the offending classified post. Repeated NIB-NIP sales are not allowed. Take it to EBay.
Buyer Beware! RunRyder cannot vouch for any seller's or buyer's credibility and will not accept responsibility for any transactions resulting from the use of this site.

Saturday, September 18 - 11:45 pm - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online