RunRyder RC
WATCH
 1 page 743 views POST REPLY
02-22-2016 01:54 AM  4 years ago
Topic Vote0Post 1
scott s.

rrElite Veteran

Orange, Ca.

MyPosts All Forum Topic
GY 520 with a DX 8
Trying to help someone set up a DX8 with a gy520 and align 620 servo.

Which frame rate should i use for 620 servo ?

I can`t get the gyro to reverse in setup Step 2 ?

When i give the radio rudder input it goes the correct way but when manually move the heli to see if it will correct it goes the wrong direction.

As far as setting up gyro gain would you use ?

Aux 2 or another ?

Thanks for any help.
SHARE  PM  EMAIL  Attn:RR  Quote
02-23-2016 04:33 PM  4 years ago
Dr.Ben

rrMaster

Richmond, VA, USA

MyPosts All Forum Topic
Trying to help someone set up a DX8 with a gy520 and align 620 servo.

Which frame rate should i use for 620 servo ?

>>1520 us

I can`t get the gyro to reverse in setup Step 2 ?

>>Not sure what to say there. It should respond to the button with the light confirming. Go through each sequential menu item step by step and confirm the change before moving on.

When i give the radio rudder input it goes the correct way but when manually move the heli to see if it will correct it goes the wrong direction.

>>That will correct when you get the gyro direction set.

As far as setting up gyro gain would you use ?
Aux 2 or another ?

>>Not sure how well it will mix with the DX8's gyro menu, so any switch aux channel will be fine. One side adjusts AVCS; the other adjusts rate gain percentage. Start at 50%.

Ben Minor
Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-25-2016 01:19 AM  4 years ago
scott s.

rrElite Veteran

Orange, Ca.

MyPosts All Forum Topic
Thanks 4 help.

Dumb question, you cant set up the gyro without the radio being on correct?

Or can you?

Bothers me y i cant get gyro 2 reverse, could it be a bad gyro?
SHARE  PM  EMAIL  Attn:RR  Quote
03-07-2016 01:22 PM  4 years ago
dkshema

rrMaster

Cedar Rapids, IA

MyPosts All Forum Topic
What channel?

Turn on your DX8 gyro menu. Plug the gyro gain lead into channel 5 of the RX. DX8 defaults to CH5 for gyro gain. You can then set the flight mode switch to select gyro gain if you want a different gain for each flight mode.
-----
Dave

* Making the World Better -- One Helicopter at a time! *

Team Heliproz
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 743 views POST REPLY
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Thursday, August 13 - 1:21 pm - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online