RunRyder RC
WATCH
 1 page 653 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Futaba FASST › 10CHP with CGY750?
02-15-2016 03:42 PM  4 years ago
Topic Vote0Post 1
MartyH

rrProfessor

USA

MyPosts All Forum Topic
10CHP with CGY750?
So I decided to get serious about FBL. I updated my two CGY750's to the current v.20 software. I have the 10CHP transmitter. This is the older module version from the FAAST era before S-Bus existed. Is there a way to use the CGY750 with this transmitter? What receiver would I need?
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2016 05:21 PM  4 years ago
Dr.Ben

rrMaster

Richmond, VA, USA

MyPosts All Forum Topic
Any of the S.Bus receivers will work; you will need a FASST one (not FHSS). You will not be able to remotely adjust the head gain because the transmitter lacks that in the gyro menu, but it's easy to do that it in the 750 with base gain. It'll all work fine.

Ben Minor
Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2016 05:28 PM  4 years ago
don s

rrElite Veteran

Chesapeake, VA

MyPosts All Forum Topic
You will however be able to switch between AVCS and normal modes on the cyclic, FWIW.E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2016 05:57 PM  4 years ago
MartyH

rrProfessor

USA

MyPosts All Forum Topic
Well, duh, that's what I get for being out of the loop for a couple years. I didn't realize there were FAAST versions of S-Bus.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2016 06:06 PM  4 years ago
Dr.Ben

rrMaster

Richmond, VA, USA

MyPosts All Forum Topic
3D mode in V2.0 does not switch between AVCS and Rate. It's always AVCS.

Ben Minor
Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2016 06:09 PM  4 years ago
MartyH

rrProfessor

USA

MyPosts All Forum Topic
Yeah, I saw that note when I upgraded the 750 software the other night. I'll have to sit down and read through it all more. I've had a flybarless heli for several years but I've been flying it (loops and rolls) with only a tail gyro. I never got the CGY750 installed. Keeps we awake! lol. Time to start using the flybarless controllers. Thanks for the help.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2016 07:12 PM  4 years ago
don s

rrElite Veteran

Chesapeake, VA

MyPosts All Forum Topic
3D mode in V2.0 does not switch between AVCS and Rate. It's always AVCS.
And F3C?
E820, Raptor G4N, X50F/E, E620, Forza 450, and some planks.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-15-2016 10:40 PM  4 years ago
Dr.Ben

rrMaster

Richmond, VA, USA

MyPosts All Forum Topic
Still there. Only thing F3C mode gains you is more complexity for no greater performance.

Ben Minor
Peak Aircraft/Team Minicopter Team Futaba Team Kontronik USA
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-16-2016 10:31 AM  4 years ago
MartyH

rrProfessor

USA

MyPosts All Forum Topic
Ordered a 6303SB last night. That'll get me back on track.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 653 views POST REPLY
HomeRC & Power✈️Aircraft🚁HelicopterRadio - Futaba FASST › 10CHP with CGY750?
 Print TOPIC  Make Suggestion 

 1  Topic Subscribe

Monday, February 24 - 2:26 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online