RunRyder RC
WATCH
 1 page 948 views POST REPLY
Home✈️Aircraft🚁HelicopterGasser Model RC HelicoptersOther › help with WooKong h and goblin gasser
01-31-2016 10:50 PM  3 years ago
Topic Vote0Post 1
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

MyPosts All Forum Topic
help with WooKong h and goblin gasser
i cant believe theres no help for this wookong........so help if you can and pass the word if you know someone......i really would like to have it right....thanks to all

CRUZROY

Watch at YouTube

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-16-2016 01:13 AM  3 years ago
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

MyPosts All Forum Topic
ok lets begin, still looking for help
first video of setup

Watch at YouTube

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-23-2016 02:51 PM  3 years ago
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

MyPosts All Forum Topic
more updates

Watch at YouTube

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-29-2016 01:26 AM  3 years ago
USA_1_INK

rrApprentice

Moses Lake, Wa.

MyPosts All Forum Topic
raptornoob

I have set up one of these WooKong H on a friends Century Gasser with good results .
First on your X and Z measurements for your IMU .

To get the correct CG . Have the Heli at proper flying weight canopy , batt. ect. With only half tank of fuel .

Now hang the heli by the tail off your tail pulley as the start of the cg point . Run a string line down the outside of the tail boom . and find where it intersects with the main shaft . This will be the CG point you will get for the X and Z measurements .

Hanging by the tail the heli will either swing forward , or swing back to give the exact CG needed for the measurements . The old way of looking at the heli down the tail boom to the main shaft does not apply with this type of set up with the WooKong .

ON the Gov Mode . Set the gear ratio to 7.1 . You need to know what head speed you want to run .
for example : 1700 x 7.1 = 12,070 engine RPM .
For the Toxic tt270 you will have to be with in the sweet spot of the engine RPM for that motor . which is somewhere around 11,500 to 13,500 RPM .
Since you cant checked the trigger firing of the Stator Gator it will be just a trial and error . I would set the Gov. gain to around 30 percent to start with .

Hope this helps
USA_1_INK
Whiplash Gasser -Raptor X50F - Raptor 90se
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
02-29-2016 02:32 AM  3 years ago
raptornoob

rrVeteran

shrewsbury. ma. u.s.a.

MyPosts All Forum Topic
i will start putting new vids here
i started over.....removed washer and 3M vbh tape and added zeal tape, i will post the setup videos here......so throw in any advice , i need all the help i can get...thanks to all

video 1, start over

Watch at YouTube

mounting the imu and gps

Watch at YouTube

2 of 8 setup

Watch at YouTube

3 of 8

Watch at YouTube

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 1 page 948 views POST REPLY
Home✈️Aircraft🚁HelicopterGasser Model RC HelicoptersOther › help with WooKong h and goblin gasser
 Print TOPIC  Make Suggestion 

 2  Topic Subscribe

Tuesday, January 21 - 1:52 am - Copyright © 2000-2020 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online