RunRyder RC
WATCH
 3 pages [ <<    <     1     ( 2 )     3     NEXT    >> ] 3736 views Post Reply
Home✈️Aircraft🚁HelicopterHIROBOHirobo Freya › With the boom, ssz-2 head
03-09-2016 01:02 PM  5 years ago
crflyer

rrApprentice

Maine

MyPosts All Forum Topic
I have belt and shaft drives on my Hirobo machines, no difference in performance.
I use shaft drives in my scale helis, makes assembly easier and no need to get in a tight place to adjust the belt.
I have hundreds of flights with belt drives and never have had a problem.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-10-2016 01:39 AM  5 years ago
Jerman

rrApprentice

Longview, TX

MyPosts All Forum Topic
I've chewed on it for a while and I may try going with a shaft drive. I realize that requires more parts but using one would be very straightforward I'm guessing. In the past all my other helis used a belt but would love to give it a shot. I also have more parts on the way and will give some updates with pics. I appreciate all the good feedback on my question from you guys. I'll have some more good stuff posted in about a week!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-10-2016 03:10 AM  5 years ago
BillK

rrNovice

CA

MyPosts All Forum Topic
If you go pipe drive, JLF92677 has a very valid concern for you; the difficulty of locating the front gear assembly 0414-155 to run a driven tail (second gear).

FYI - I've flown belt driven Hirobos for 20 years and have never had a reliability issue, and I've never had to adjust tension on the belt. I suppose flying in SoCal we don't have the big temperature swings.

Despite the dilemma of what to chose, you're still in a good place.....your building a HIROBO!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-10-2016 03:21 AM  5 years ago
Jerman

rrApprentice

Longview, TX

MyPosts All Forum Topic
Hey thanks for the heads up. The part I was looking for is actually 0404-644, an older part which I've located. The part you speak of though I've located as well, that part would work with the DTDS version, that would not work with the frame I'm using as it only has one main gear and then the gear that drives either a belt or shaft. Thanks anyways I appreciate it!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2016 03:30 AM  5 years ago
ampex456

rrApprentice

La Verne, CA

MyPosts All Forum Topic
Plus I bet there is a way to use a Freya version if need be. The ex box was awesome but really heavy. The 644 worked for years too. That entire dtds setup carried into all the Helis eventually with the parts dimensions after that ex boxStill no problems, only solutions, governed by MARSHALL AMPLIFICATION. I'm a HIROBO Fan, R U?
SHARE  PM  EMAIL  Attn:RR  Quote
03-13-2016 03:38 AM  5 years ago
Jerman

rrApprentice

Longview, TX

MyPosts All Forum Topic
Yeah I thought about that as well, building this thing has been a total blast. It's taken me a while but well worth it. I just love the older retro look of it. Helis these days just appear to be over the top. Less is more
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-13-2016 03:42 AM  5 years ago
ampex456

rrApprentice

La Verne, CA

MyPosts All Forum Topic
I'm a fan of the lower landing gear and Freya style cabin. Fast looking. I'm glad to be back flying Hirobo. They just did thing right for longevity.Still no problems, only solutions, governed by MARSHALL AMPLIFICATION. I'm a HIROBO Fan, R U?
SHARE  PM  EMAIL  Attn:RR  Quote
03-13-2016 04:00 AM  5 years ago
Jerman

rrApprentice

Longview, TX

MyPosts All Forum Topic
Yeah just from what I've noticed is everything is so well made, meant to last and not wear out. Years ago I had an older trex 450 v2, that thing was nothing but junk and gave me problems. I'd imagine their stuff is better now but Align left a bad taste in my mouth. Hirobo has been around for so long, it amazes me how well thought out their stuff is and how many parts can be interchanged with what you want to do. Just good stuff!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-15-2016 02:50 AM  5 years ago
Jerman

rrApprentice

Longview, TX

MyPosts All Forum Topic
I pulled off the green decals on the bottom, couldn't get them to stay down, and put on the taller struts for now, grass is tall out here so I'll use them for now. I'll do a few more things to spruce up the canopy. My new parts should arrive any day and will do an update on the frame with all the new levers installed

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-15-2016 09:32 AM  5 years ago
F3CWNB

rrVeteran

Napier, New Zealand

MyPosts All Forum Topic
Grrrr other people having fun with Eagle2's - I really should get off my chuff and resume my projects...'Life' is Looking Up!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-26-2016 06:11 AM  5 years ago
Jerman

rrApprentice

Longview, TX

MyPosts All Forum Topic
Late night guys, as promised

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-26-2016 06:32 AM  5 years ago
F3CWNB

rrVeteran

Napier, New Zealand

MyPosts All Forum Topic
Looking good!!!'Life' is Looking Up!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
03-26-2016 02:30 PM  5 years ago
Jerman

rrApprentice

Longview, TX

MyPosts All Forum Topic
Thanks, yeah I flipped the gyro plate around facing outwards, I might try mounting the gyro outside providing there's enough clearance under the boom. Everything should operate very smooth with the linkages and all these bearings.. She's a beauty
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-06-2016 01:41 PM  5 years ago
Jerman

rrApprentice

Longview, TX

MyPosts All Forum Topic
Guys, was wondering if the 0414-535 E3 clutch would work of with the eagle if I'm to convert to electric or would it be best to use the original clutch that's intended for this model, thanks
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-07-2016 12:42 AM  5 years ago
JLF92677

rrApprentice

Southern California

MyPosts All Forum Topic
Herman,

IMO I don't think 0414-535 clutch would work well for your model. This clutch is intended for driven tail model which requires a second gear, which your model cannot accept because of lack of frames clearance for the second gear. The correct clutch is 0404-615 which in combination with 0404-617 AUTO-ROT.TORQUE LIMITER you can have a limited slip driven tail. If you cannot locate either I have one handy.

Best of luck with you build.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-07-2016 01:05 AM  5 years ago
JLF92677

rrApprentice

Southern California

MyPosts All Forum Topic
Jerman,

Perhaps you might be interest in the following method of mounting your receiver, gyro amp and gyro sensor, which leaves the forward plate open for battery mounting. The attached pics are from an Eagle 97WC which uses the same frame layout than yours, just CF instead of Al frames but same layout. I used the same 0404-745 gyro mount plate that comes with the WC kit to mount recv and gyro amp. All you need to do is drill holes in the front of the upper frames to install the plate. I also like this better for the gyro sensor because is further away from the engine exhaust to keep exhaust oil away from it. Just a suggestion.

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-07-2016 02:08 AM  5 years ago
Jerman

rrApprentice

Longview, TX

MyPosts All Forum Topic
Guys thanks! Good info and pics, really good to know and will likely go with your suggestions
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-08-2016 08:24 AM  5 years ago
F3CWNB

rrVeteran

Napier, New Zealand

MyPosts All Forum Topic
Yeah, thanks for sharing that... Nice tidy set up...'Life' is Looking Up!!!
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-10-2016 09:58 PM  5 years ago
Jerman

rrApprentice

Longview, TX

MyPosts All Forum Topic
Worked some today on setting up the linkages, should be dialed in really nicely once in the air with minor adjustments

SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
04-12-2016 02:39 AM  5 years ago
Jerman

rrApprentice

Longview, TX

MyPosts All Forum Topic
Hey guys, I noticed hirobo later released the longer boom 0414-577, my question is would that work well with my setup. I assume you would have to use a belt with this longer boom and that a shaft wouldn't work but would allow for longer blades if I'm correct.
SHARE  PM  EMAIL  GALLERY  Attn:RR  Quote
WATCH
 3 pages [ <<    <     1     ( 2 )     3     NEXT    >> ] 3736 views Post Reply
Home✈️Aircraft🚁HelicopterHIROBOHirobo Freya › With the boom, ssz-2 head
Print TOPIC

 6  Topic Subscribe

Wednesday, September 22 - 9:30 pm - Copyright © 2000-2021 RunRyder   EMAILEnable Cookies

Login Here
 New Subscriptions 
 Buddies Online